Heeft u geen account? Meld u gratis aan
Voor adverteren op
Interesse om verkoper te worden? Ontvang informatie
Heeft u geen account? Meld u gratis aan
Voor adverteren op
Interesse om verkoper te worden? Ontvang informatie
Heeft u geen account? Meld u gratis aan
Voor adverteren op
Interesse om verkoper te worden? Ontvang informatie
Injection Valve WI 4.36
Ook bekend als:
SSSV, water injection valve, WI valveBuy
Made to Order
Product
New
API
Air Freight
Titel:
Well Flow Control Valve Direct Response 4.36 inchModel Nummer:
wiBeschikbaarheid:
Made to OrderLevertijd (weken):
4 weeksChoose
Transactie Type
BuyStaat
NewGewicht
less than 200 kgLocatie
CanadaBedrijfstype
Product ProviderKwaliteitsgarantie
APIPrijs
Request for Quote Based on specificationsMateriaal
SteelMerknaam
HalliburtonVerzending
Air FreightNotities
The WI retrievable injection valve is a high-performance, high-flow rate injection valve.Midastream Supply Company in Airdrie
The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
FXE 2-7/8 inch Wireline Retrievable Surface Controlled Subsurface Safety Valve
WR-SCSSSV FXEMidastream Supply Company in Airdrie
The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
The HS™ is setting the standard for high-performance, single-string retrievable, hydraulic-set shear-release packers. Its simple and reliable design provides maximum pre-set prevention while running and has improved sealing and retrieving reliability, metallurgy and elastomer selections it for the well environment. Other applications include: production, injection and zonal isolation; single-string selective completions or dual-string completions with multiple packers; completions that require pre-set prevention while running; deviated wells or other applications when rotation for installation or removal is not beneicial; when it is beneicial to displace and set packers after the well is langed up. The HS-S™ is beneicial when testing the tubing string before packer setting or to independently set and test individual packers in multiple-packer completions and stacked packer applications. The HS-S is the selective-set version of the HS hydraulic-set single-string packer. Setting and retrieval is the same as the HS with the exception of an inner sleeve that must be shifted mechanically before the packer will set. The selective-setting mechanism prevents the packer from premature setting when high tubing-to annulus pressure differences are encountered or when tubing- pressure tests are performed. Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917)
Buy
Made to Order
Product
New
API
Sea Freight
Tubing Retrievable SCSSSV 3-1/2 inch SP
TR-SCSSSV SPMidastream Supply Company in Airdrie
The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog.
Buy
In Stock
E&P
New
API
Air Freight
Surface Controlled Subsurface Safety Valve FRN 6-5/8 inch
WR-SCSSSV FRNMidastream Supply Company in Airdrie
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Midastream Supply Company in Airdrie
The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
4-1/2 inch Type MC Water Injection Safety Valve
MC Injection ValveMidastream Supply Company in Airdrie
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer
Buy
In Stock
Product
New
API
Land Freight
G Compression set Retrievable Packer
G PackerMidastream Supply Company in Airdrie
The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. C-1 Single Grip Invertible Packer The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations.
Buy
In Stock
Product
Used
API
Sea Freight
4-1/2 inch SP SCSSSV Tubing Retrievable
SCSSSV SPMidastream Supply Company in Airdrie
The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Injection Safety MC Valve 2-1/2 inch
MC ValveMidastream Supply Company in Airdrie
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer
Buy
In Stock
Product
New
ISO
Land Freight
Midastream Supply Company in Airdrie
The MJS™ packer is a compact, high-performance, thermal packer system which offers an expansion joint and a casing packer in a single assembly. The MJS is a rotationally set, double-grip packer, speciically designed for use in steam injection, huff and puff or geothermal production wells, when a wide range of pressures from above or below are anticipated. Please note: Tubing weight and grade must be capable of applying minimum speciied setting torque to the packer. We can source from current stock or direct from the manufacturer.
Buy
Made to Order
Product
New
API
Sea Freight
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Eleks in Toronto
ELEKS: Transforming Energy Excellence with Cloud-First Strategies In the dynamic realm of the energy sector, innovation isn't a luxury – it's a necessity. ELEKS takes the lead, harnessing our unparalleled energy sector technology expertise to redefine the way you manage energy and utilities. With our cutting-edge cloud-first strategies, we're here to propel your operations to new heights of efficiency, cost-effectiveness, and security. Here's how ELEKS can be your catalyst for an energy future that's smarter, more connected, and infinitely more agile: Tailored Cloud-First Strategies: Your organisation is unique, and so are our strategies. ELEKS expertly tailors cloud-first approaches to fit your specific needs, unlocking unparalleled potential for your energy operations. Performance Optimization: Elevate your performance benchmarks with cloud-first strategies. Our solutions optimize the performance of your software systems, ensuring they operate at their peak efficiency. Cost-Effectiveness Amplified: Say goodbye to bloated budgets. Our cloud-first strategies enhance cost-effectiveness, helping you allocate resources efficiently and maximize the return on your technology investments. Resilience Reinvented: Your operations require robustness. ELEKS' cloud-first strategies bolster the resilience of your systems, ensuring seamless operations even in the face of challenges. Data Security Elevated: Data security is non-negotiable. With our cloud-first strategies, safeguarding your data becomes paramount, protecting your valuable assets from any potential threats. Big Data Unleashed: Embrace the power of Big Data with ELEKS. Our cloud migration services enable you to harness Big Data's potential, enhancing customer satisfaction through real-time analytics on energy consumption. Real-Time Customer Insights: Elevate your customer experience game. Our solutions empower you to provide end-users with real-time insights into their energy consumption, fostering satisfaction and engagement. Advanced Data Analytics: Data is your ally. Our team of custom software development experts implements cloud-based solutions infused with advanced data analytics, turning raw information into actionable insights. ML-Driven Precision: Embrace the future of energy management. Our solutions feature Machine Learning (ML) capabilities, enabling predictive maintenance and driving the precision of your energy systems. ELEKS: For an Agile Energy Future ELEKS isn't just a service provider – we're your innovation partner. Our energy sector technology expertise doesn't just promise solutions; it delivers transformation. With ELEKS, you're not just adopting cloud-first strategies – you're embracing an energy future that's agile, connected, and limitless. Join us in scripting a new energy narrative where innovation meets precision, cost-effectiveness is a norm, and security is paramount. With ELEKS, you're stepping into a realm where technology-driven solutions redefine energy excellence and operational aspirations become reality. Embrace a future where cloud-first strategies power your energy journey, and efficiency is at the heart of every operation.
Service
Made to Order
Service
New
ISO
CSA 120 unit Locking FAST charger rack
Miner's Cap Lamp Charging StationProvix in New Lowell
Secure and Streamline Your Equipment Charging with the CSA 120 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 120 Unit Locking FAST Charger Rack (Part # NWI-NWCR-120BLC), a robust and efficient charging solution designed for large-scale mining, construction, and industrial operations. This high-capacity charger rack combines rapid charging technology with enhanced security, making it an essential component for any operation looking to optimize equipment readiness and safety. High-Capacity Charging for Large Operations The CSA 120 Unit Charger Rack is tailor-made for operations that require fast and efficient charging of a large number of devices. With the capacity to charge 120 units simultaneously, it offers charging times of just 4 hours for the WISE LITE2 and 5 hours for LAMP3A/4A models. This impressive speed ensures that your equipment is always ready for use, minimizing downtime and maximizing productivity. Enhanced Security with Locking Feature One of the standout features of the CSA 120 Unit Charger Rack is its locking mechanism. This added layer of security is crucial for operations where equipment safety and prevention of unauthorized access are paramount. The locking feature ensures that your valuable equipment is protected during charging, providing peace of mind and enhanced safety in the workplace. Space-Efficient Design for Busy Workplaces Despite its large capacity, this charger rack is designed with space efficiency in mind. Its single-sided configuration allows for easy placement in equipment rooms, charging stations, or in areas where space is at a premium, ensuring a streamlined and organized charging setup. Built for Durability and Reliability Constructed to withstand the demanding environments typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures it can endure daily use, offering long-term, dependable performance. Ideal for Comprehensive Charging Management The CSA 120 Unit Locking FAST Charger Rack is an ideal solution for mining companies, construction firms, and rental equipment providers managing large fleets of devices. Its ability to securely charge a significant number of units quickly makes it a valuable tool for large teams and operations. Upgrade Your Charging Infrastructure Today Invest in the Wisdom CSA 120 Unit Locking FAST Charger Rack from Provix to enhance the efficiency and security of your charging processes. Visit www.provix.net to learn more about this advanced charging solution and discover our wide range of high-quality mining equipment.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
CWB National Leasing in Winnipeg
Streamline Your Operations with Mixer Leasing from CWB National Leasing Enhancing Efficiency and Financial Flexibility in Construction In the realm of construction and manufacturing, mixers play a pivotal role in maintaining efficiency and productivity. Opting to lease mixers through Canadian Western Bank (CWB) National Leasing presents a strategic and financially savvy approach for businesses seeking to upgrade or expand their equipment capabilities. Here's how leasing mixers can benefit your business: 1. Rapid Equipment Acquisition CWB National Leasing understands the importance of time in your operations. They offer a swift leasing process, typically approving applications and notifying your equipment dealer about the payment within 48 hours. This efficiency ensures that your mixers are delivered and operational promptly, keeping your projects moving without delay. 2. Enhanced Purchasing Power Leasing mixers with CWB National Leasing boosts your financial flexibility. You can avoid a large upfront purchase and instead enjoy the benefits of manageable periodic payments. This frees up capital for other vital aspects of your business. Additionally, you have the option to enhance your mixers with extra features or accessories for a small increase in your payments. 3. Balanced Cash Flow Management Smaller, spread-out lease payments mean that your mixers can start contributing to your business’s revenue even as they are being paid off. This approach helps maintain a healthy expense-to-revenue ratio, which is essential for financial stability and growth. 4. Flexible Payment Options CWB National Leasing offers adaptable payment plans, including seasonal, semi-annual, or annual options, to suit your business’s cash flow. This flexibility is especially beneficial for businesses with variable income streams, ensuring that payments align with your financial capacity. 5. Potential Tax Advantages Leasing mixers can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. It's advisable to consult with a tax advisor to understand how leasing can enhance your business’s tax position. Conclusion Choosing to lease mixers through CWB National Leasing is more than just an equipment acquisition; it’s a smart business decision that empowers your operations with essential tools while preserving financial flexibility. It enables you to utilize advanced mixers for your projects while managing your finances effectively, paving the way for enhanced operational efficiency, growth, and profitability in the competitive world of construction and manufacturing.
Service
In Stock
Service
New
ISO
Lovat Gas Solutions in Edmonton
Lovat Gas Solutions: Your Trusted Partner for CNG Virtual Pipelines At Lovat Gas Solutions, we are driven by our commitment to finding the right solutions for our customers, no matter the size or complexity of the problem. We take great pride in our ability to work closely with you to understand your unique needs and deliver the most suitable CNG (compressed natural gas) solutions available in the industry. When it comes to your CNG requirements, our experienced team is fully prepared to meet your needs. Whether you are facing a planned outage or an emergency situation, we are here to provide a quick and efficient solution. With a single phone call, you can rely on our responsive and reliable professionals to swiftly address your CNG challenges. Why choose Lovat Gas Solutions for your CNG needs? 1. Customer-Centric Approach: We prioritize working hand in hand with our customers to identify the most appropriate solution for their specific requirements. Your satisfaction is our top priority, and we go above and beyond to ensure that our services align with your expectations. 2. Comprehensive CNG Expertise: Our team is equipped with extensive knowledge and expertise in the field of CNG. We stay up-to-date with the latest industry trends and advancements, allowing us to provide you with innovative and effective solutions. 3. Responsive and Reliable Service: Time is of the essence when it comes to CNG outages or emergencies. You can count on us to promptly address your needs and provide a quick solution. Our reliable professionals are committed to minimizing downtime and ensuring the smooth operation of your business. 4. Tailored Solutions: We understand that every CNG situation is unique, and we believe in offering customized solutions. By carefully assessing your requirements, we can develop a solution that is perfectly tailored to your specific needs, ensuring optimal results. Partner with Lovat Gas Solutions today and experience the difference of working with a company that puts your needs first. Whether you are facing a planned outage or an unexpected emergency, our team is ready to provide you with responsive, reliable, and effective CNG solutions. Contact us now and let us help you overcome your CNG challenges, no matter the size or complexity. Together, we will find the perfect solution for your CNG needs.
Service
In Stock
Product & Service
New
ANSI
Land Freight
Midastream Supply Company in Airdrie
Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required.
Buy
In Stock
Manufacturer
New
API
Sea Freight
Provix in New Lowell
Experience Advanced Illumination with the Wisdom Lamp 3A – A Revolutionary Cordless Miner's Cap Lamp from Provix Provix proudly presents the Wisdom Lamp 3A, a state-of-the-art cordless miner's cap lamp designed for the modern miner. This lamp is a perfect combination of technology, safety, and convenience, making it an essential tool for mining operations. High-Performance Lighting for Enhanced Visibility The Lamp 3A is equipped with a powerful 7,000mAh battery and a rated voltage of 3.7V, ensuring long-lasting and efficient illumination. It features a main light with two settings: a low mode (LO) providing 50 lumens and a high mode (HI) offering a bright 265 lumens. The main light life span is an impressive 50,000 hours, ensuring reliability and longevity. Dual Light Modes for Versatile Use With its main light working current of 80 mA (LO) and 570 mA (HI), the Lamp 3A is versatile for different lighting needs. The main light power is 0.24W (LO) and 1.71W (HI), providing suitable illumination for various tasks. The lamp lighting degree is 1,800lx (LO) and 12,000lx (HI), ensuring clear visibility in all conditions. Safety and Durability in Harsh Conditions Safety is paramount in mining equipment, and the Lamp 3A adheres to the highest standards. It is explosion-proof, certified with ATEX GROUP II, and has an IP68 waterproof rating. The short circuit protection time of less than 320μs adds to its safety features, making it a reliable choice in hazardous environments. Ergonomic and Convenient Design Weighing just 169g (5.96 oz) and with dimensions of 84x69x50mm (3.3x2.7x2.0in), the Lamp 3A is designed for comfort and ease of use. Its cordless design enhances mobility, and the USB charging capability allows for easy and convenient charging with a charging time of just 5 hours. Long Battery Life for Extended Use The Lamp 3A offers an impressive continuous discharging time of up to 60 hours in low mode and 13 hours in high mode, ensuring it keeps up with the demands of long mining shifts. Get Your Wisdom Lamp 3A Today Enhance your mining operations with the reliable, efficient, and safe Wisdom Lamp 3A. Available now at Provix, this cordless miner's cap lamp is your solution for advanced lighting in challenging environments. For more details, visit www.provix.net or contact us directly.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Transport Trucking services for local and international equipment hauling
Transport TruckFeldman Transport in Red Deer
Transport trucks for long haul equipment moves. Specializing in international and express shipments. Since truck transportation effectively remains the most direct solution for the transport of your goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. If you need to get your goods from one place to another in a safe, reliable and cost effective way then truck transportation is hard to beat. So hard in fact that transporting goods by truck is still the most widely used mode of transport in Canada and North America. Contact us to arrange your next rig move or industrial equipment shipment.
Rental
Currently in Use
Product & Service
Used
ISO
Land Freight
Provix in New Lowell
Illuminate Your Work with the Wisdom EX Cap Lamp – A Robust Solution from Provix Provix is excited to introduce the Wisdom EX Cap Lamp (model NWI-WLAMP3-EX), a high-performance lighting solution designed to meet the needs of professionals in various industries. This cap lamp combines superior illumination with the highest safety standards. Advanced Lighting for Challenging Environments The Wisdom EX Cap Lamp is equipped with a powerful 7.0Ah battery, providing long-lasting and reliable illumination for extensive work periods. Designed to operate efficiently in extreme conditions, it functions perfectly in temperatures ranging from -20°C to 40°C, making it ideal for a wide range of working environments. Compliance with Safety Standards Safety is paramount in professional settings, and the Wisdom EX Cap Lamp meets stringent safety standards. It is certified for Class I, II, and III, Division I, and complies with CSA C22.2 and UL 913 standards. This compliance ensures that the lamp is safe for use in hazardous locations where explosive gases or dust may be present. Durable and Reliable Built to withstand the rigors of industrial use, the Wisdom EX Cap Lamp is a durable and reliable choice for professionals. Its robust construction ensures it can endure the tough conditions often found in mining, construction, and other industrial settings. Ergonomic and User-Friendly Design Weighing in at a comfortable level, the Wisdom EX Cap Lamp is designed for ease of use and comfort, ensuring that it can be worn for extended periods without causing fatigue. Its ergonomic design makes it a practical choice for daily use in demanding work conditions. Versatile for Various Industrial Applications The Wisdom EX Cap Lamp is not only suitable for mining but also for other applications such as construction, oil and gas, and industrial maintenance. Its versatility and dependability make it an essential tool for a wide range of professionals. Get Your Wisdom EX Cap Lamp Today Upgrade your lighting equipment with the Wisdom EX Cap Lamp from Provix. Available now, this cap lamp is your solution for safe, efficient, and reliable lighting in any work environment.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Hoca Oil Tools in Zwartemeer
Enhancing Well Integrity with HOCA Oil Tools B.V.'s Slickline Gauge Cutters In the specialized field of oil and gas exploration and production, maintaining well integrity and efficiency is non-negotiable. At HOCA Oil Tools B.V., we are at the forefront of providing innovative solutions that cater to the complex needs of wellbore maintenance. Our comprehensive array of Slickline Gauge Cutters represents our commitment to excellence and precision, designed to tackle diverse challenges within the tubing string. Multi-functional and Versatile Applications: Our Rebco Type ‘A’ Gauge Cutters serve as multi-functional tools indispensable in the upkeep and maintenance of tubing strings. They are meticulously designed for removing paraffin, corrosion, and other foreign materials from the internal surface of the tubing, ensuring unimpeded flow and operational efficiency. The versatility extends to gauging and tagging obstructions, identifying and marking landing nipples, and preparing wells for the safe insertion of sub-surface controls. These applications underscore the critical role our gauge cutters play in well maintenance and diagnostics, emphasizing their value in operational planning and safety. Customizable Sizes for Precise Operations: Understanding the diversity of wellbore sizes and operational requirements, HOCA Oil Tools offers Gauge Cutters ranging from 1 inch to 7 inches in diameter. This extensive range ensures that all operational needs are met, from smaller interventions to large-scale maintenance tasks. Each gauge cutter can be customized to specific operational needs, ensuring that whatever the well condition or requirement, we have the right tool for the job. How to Order and Customization Options: Our ordering process is streamlined to ensure that you receive the gauge cutter that best suits your operational needs. Gauge cutters are ordered by part number, designated by the outer diameter to three decimal places, ensuring precision and compatibility with your specific well conditions. Additionally, we offer customization options for thread and fishing neck lengths, accommodating unique operational requirements and ensuring that our tools integrate seamlessly with your existing equipment. In conclusion, HOCA Oil Tools B.V. remains committed to providing the oil and gas industry with superior quality tools and customer service. Our Slickline Gauge Cutters are a testament to this commitment, offering unparalleled versatility, efficiency, and reliability in wellbore maintenance operations. Choose HOCA Oil Tools for your downhole needs, and experience the difference that quality, innovation, and precision can make in optimizing your well performance
Buy
In Stock
Product & Service
New
API
Air Freight
CWB National Leasing in Winnipeg
Enhancing Construction with Smart Compactor Leasing from CWB National Leasing Propel Your Construction Business with Strategic Equipment Leasing As a business owner in the construction industry, obtaining the right equipment is pivotal for your success. One such essential tool is a compactor, and leasing it through Canadian Western Bank (CWB) National Leasing offers numerous advantages. Here's how leasing a compactor can benefit your construction business: 1. Rapid Equipment Access With CWB National Leasing, the process of leasing a compactor is swift and efficient. Following a quick review of your application, typically within 48 hours, CWB National Leasing will notify your equipment dealer that payment is underway. This expedited process means your compactor will be on your site and operational in no time. 2. Increased Purchasing Power Leasing a compactor through CWB National Leasing empowers you with greater buying power. Opt for periodic payments instead of a hefty one-time purchase, freeing up capital for other vital business needs. Plus, you have the option to enhance your compactor with additional features or accessories for a slight increase in your payment. 3. Cash Flow Management Manage your finances more effectively with smaller, regular lease payments. This approach means your new compactor starts contributing to your revenue even as you pay for it, facilitating a balanced expense-to-revenue ratio. 4. Flexible Payment Structures Recognizing the diverse nature of construction businesses, CWB National Leasing offers various payment options including seasonal, semi-annual, or annual plans. This flexibility allows you to match payments with your business's cash flow. 5. Potential Tax Advantages Leasing can provide significant tax benefits by allowing lease payments to be expensed, rather than capitalizing the cost of the compactor. Consult with your tax advisor to understand how leasing can favorably impact your business's tax position. 6. Customized Payment Plans CWB National Leasing tailors leases to align with your unique business needs and cash flow patterns, ensuring that the payment schedule fits your business model perfectly. 7. Various Buyout Options At the end of your lease, you can choose from several buyout options, ranging from a nominal amount to 50% of the total equipment cost. This flexibility can lead to eventual ownership of your compactor. 8. Fair Market Value and Adaptive Payment Options Defer a portion of your compactor’s cost to the lease's end, with the option to purchase at fair market value or upgrade. The step-up or step-down payment options also allow for adjustments based on changing cash flow needs. 9. Ideal for Seasonal Revenue For businesses with seasonal income, such as certain construction projects, CWB National Leasing offers payment schedules that align with your business’s revenue cycle, like a six-month-on, six-month-off plan. Conclusion Choosing to lease your compactor through CWB National Leasing is more than just an equipment acquisition; it’s a strategic decision that enhances your business's operational capacity while maintaining financial flexibility. It enables you to deploy state-of-the-art compactors in your projects while managing your finances smartly, paving the way for growth and profitability in the competitive construction industry.
Service
In Stock
Service
New
ISO
CWB National Leasing in Winnipeg
Optimize Your Material Handling with Conveyor Leasing from CWB National Leasing Streamlining Your Operations with Flexible and Efficient Equipment Solutions For businesses in manufacturing, logistics, warehousing, or any sector requiring efficient material handling, conveyors are essential tools for streamlining operations. Leasing conveyors through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution to enhance your material handling capabilities. Here’s how leasing conveyors can benefit your business: 1. Rapid Equipment Deployment CWB National Leasing prioritizes the efficiency of your operations. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This rapid turnaround ensures that your conveyors can be delivered and operational quickly, minimizing downtime and enhancing your operational efficiency. 2. Enhanced Financial Flexibility Leasing conveyors with CWB National Leasing increases your buying power. Opting for periodic payments over a significant initial purchase frees up capital for other critical business areas. The option to add extra features or accessories to your conveyors for a small payment increase allows for customization to meet specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term allow your conveyors to start contributing to your business’s revenue while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is crucial for the financial health and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and aligned with your financial capacity. 5. Potential Tax Advantages Leasing conveyors can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease conveyors through CWB National Leasing is a strategic decision that equips your business with essential material handling equipment while maintaining financial flexibility. It ensures access to high-quality conveyors, vital for efficient operations across various industries, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved productivity, and increased profitability, helping your business to excel in a competitive market.
Service
In Stock
Service
New
ISO
InWaTec Combined in Vechta
Streamlining Well Maintenance: InWaTec Combined’s Mini-Coil Services for Well Cleanouts In the pursuit of operational excellence within the oil and gas industry, well maintenance stands as a critical routine to ensure continued productivity and longevity of wells. InWaTec Combined’s Mini-Coil Services are specifically tailored for well cleanouts, offering a highly effective solution for the removal of debris and buildup that can impact well performance. Optimized Fluid Delivery: Our Mini-Coil Tubing is expertly designed for the precise placement of cleanout fluids, delivering them directly to the areas of buildup. This targeted approach is key to dissolving or dislodging blockages and ensuring a thorough well cleanout process. High-Pressure Cleaning: One of the standout features of our Mini-Coil Tubing is its ability to operate under much higher pumping pressures compared to standard tubing. This is particularly advantageous during well cleanouts where higher pressures can be required to remove stubborn or compacted debris. Efficiency in Production Lifting: Post-cleanout, it's often necessary to facilitate the well's return to optimal production levels. The Mini-Coil Tubing not only excels in delivering cleanout fluids but also in lifting wells back into production, making the transition from maintenance to output both seamless and efficient. Navigating Limitations: While the Mini-Coil Tubing may have limitations in terms of flow rate and snubbing capabilities due to its smaller size, InWaTec Combined has honed the application of this technology to maximize its benefits. Our experts are adept at customizing operations to work within these parameters while still achieving exceptional results. At InWaTec Combined, we understand that time is a precious commodity in well operations. Our Mini-Coil Services for well cleanouts are designed to minimize downtime, ensuring that maintenance is carried out swiftly and effectively, reducing the impact on production schedules. Our commitment to delivering innovative solutions is reflected in our Mini-Coil Services. We not only provide the tools but also the strategic expertise to ensure that every cleanout operation is a success. With InWaTec Combined, operators can rest assured that their wells will be maintained with the highest level of precision and care. Choose InWaTec Combined for your well cleanout needs and benefit from our advanced Mini-Coil Services. We bring to your operations a blend of precision, power, and efficiency that ensures your wells remain clean, clear, and productive. Let us partner with you to maintain the heartbeat of your well operations, ensuring uninterrupted flow and optimal performance.
Service
In Stock
Service
New
API
Land Freight
FRN 3-1/2 inch Subsurface Safety Valve WR
WR-SCSSSV FRNMidastream Supply Company in Airdrie
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Electric Submersible Pump (ESP) systems for oil and geothermal applications
ESP pumps, motors and electrical components for industryMidastream Supply Company in Airdrie
The electrical submersible pump is an efficient and reliable artificial-lift method for lifting moderate to high volumes of fluids from wellbores with volumes rates from 150 B/D to as much as 150,000 B/D (24 to 24,600 m3/d). A complete ESP system can be designed and supplied to meet the requirements from individual wells. The ESP system is comprised of; intake, pump, motor, seal section, cable, feed-through, surface electrical and any sensors, software and variable frequency drives (VFD's). ESP's can be used onshore, offshore, subsea, or in relatively high gas saturations.
Buy
Made to Order
Product & Service
New
API
Sea Freight
Provix in New Lowell
Secure Your Lighting with Wisdom's NWI-NS-HMC4 Hard Hat Clip Mount – Now Available at Provix Provix is excited to introduce the Wisdom NWI-NS-HMC4 Hard Hat Clip Mount, a practical and robust accessory designed for miners and construction workers. This clip mount is an essential tool for anyone who requires reliable and secure mounting of lighting equipment on their hard hats. Effortless Installation and Strong Adhesion The NWI-NS-HMC4 Hard Hat Clip Mount is equipped with 3M adhesive, known for its strong bonding capabilities. This ensures a secure attachment to any hard hat, providing a stable and sturdy base for mounting mining lamps or other light sources. The ease of installation allows users to quickly set up their equipment without the need for additional tools or complicated procedures. Designed for Durability and Compatibility Crafted with high-quality materials, the Wisdom Hard Hat Clip Mount is built to withstand the tough conditions often encountered in mining and construction environments. Its robust design ensures that it can hold up against daily wear and tear, making it a reliable accessory for any professional. Versatile and Convenient This clip mount is not only durable but also versatile. It is designed to be compatible with a wide range of headlamps and mining lamps, making it a universal solution for various lighting needs. Its compact size and lightweight nature ensure that it doesn’t add bulk or weight to the hard hat, maintaining comfort for the user. Enhance Your Safety and Efficiency The NWI-NS-HMC4 Hard Hat Clip Mount enhances safety by ensuring that your headlamp stays securely in place, providing consistent illumination without the risk of it falling or shifting. This stability is crucial for efficient and safe working conditions, especially in low-light environments. Get Yours Today Upgrade your safety gear with the Wisdom NWI-NS-HMC4 Hard Hat Clip Mount from Provix. Visit our website at www.provix.net to learn more about this essential accessory and explore our range of mining and construction equipment. Secure your lighting and enhance your work safety and efficiency with Wisdom's reliable products.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
bericht:
Naar: leverancier
Midastream Supply Company in Airdrie
The AD-1™ tension packer is a compact, economical, retrievable packer. Primarily used in waterlood applications, it can also be used for production, treating operations, and when a set-down packer is impractical. And because the AD-1 is tension-set, it is ideally suited for shallow wells where set-down weight is not available. The ADL-1™ tension packer is a large-bore version of the AD-1 and offers the same features and beneits; running and retrieving operations are also the same. We can source from current stock or direct from the manufacturer.
Buy
In Stock
Product
New
API
Sea Freight
KEY360 Inc in New York, NY
SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT
Service
In Stock
Service
New
ISO
CSA 60 unit, Locking FAST charger rack
Miner's Cap Lamp Charging StationProvix in New Lowell
Supercharge Your Operations with the CSA 60 Unit Locking FAST Charger Rack from Provix Provix is excited to announce the latest addition to our product line: the CSA 60 Unit Locking FAST Charger Rack (model NWI-NWCR-60BLC-SSI). This single-sided charging powerhouse is designed to meet the high demands of modern mining operations, offering rapid and secure charging for up to 60 units simultaneously. Efficient Charging for Wisdom Lamps The CSA 60 Unit FAST Charger Rack is optimized for the WISE LITE2, LAMP3A, and 4A models, providing a fast charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This efficiency is crucial in minimizing downtime and keeping your team's equipment ready for action. High-Capacity Design Designed to accommodate up to 60 units, this charger rack is ideal for large-scale mining operations. The single-sided configuration makes it a space-saving solution, fitting easily into equipment rooms or designated charging areas. Enhanced Security with Locking Feature One of the standout features of the CSA charger rack is its locking mechanism. This added security ensures that your valuable equipment is protected while charging, providing peace of mind in busy or public workspaces. Durable and Reliable The charger rack is built to withstand the tough conditions of mining environments. Its robust construction ensures long-term reliability, making it a wise investment for any mining operation looking to streamline its charging process. Perfect for Large Teams and Operations Whether you're equipping a large mining crew or managing a fleet of rental equipment, the CSA 60 Unit Locking FAST Charger Rack is an essential tool. Its ability to charge multiple units simultaneously not only saves time but also ensures that all necessary equipment is charged and ready for use. Upgrade Your Charging Setup Today The Wisdom CSA 60 Unit Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to learn more about this efficient, secure, and space-saving charging solution. Stay ahead of the game with Provix's advanced mining equipment.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Injection Well Subsurface Safety Valve WI 4.89
WI ValveMidastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Pipeline Pipe Inventory and Inspection Tracking
PipeDNA is a cloud-based pipe management solutionPipeDNA in Houston
Streamlining Pipeline Pipe Inventory and Inspection Tracking with PipeDNA: Enhancing Efficiency in the Oil and Gas Industry Efficient management of pipeline pipe inventory and inspection tracking is crucial for the smooth operation of the oil and gas industry. Introducing PipeDNA, a state-of-the-art cloud-based platform designed to streamline the management of pipe and tube throughout the entire supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage pipeline pipe inventory, increase visibility, and optimize inspection processes. Comprehensive Inventory and Tracking: PipeDNA provides a comprehensive inventory management and tracking system for pipelines, enabling stakeholders to have a real-time view of their pipeline assets. From monitoring utilization and activity to analyzing trends, the platform equips stakeholders with valuable insights to make informed decisions about their pipeline pipe inventory. With enhanced visibility, stakeholders can optimize inventory levels, minimize downtime, and maximize resource utilization. Efficient Logistics Management: Managing the logistics of pipelines can be complex, but PipeDNA simplifies the process by offering robust logistics management features. Stakeholders can efficiently handle shipments, track the status of pipeline pipe in transit, and streamline documentation processes. Additionally, the platform facilitates pipe bundling, ensuring efficient grouping and transportation of pipeline pipe, leading to cost savings and improved operational efficiency. Streamlined Inspection Management: PipeDNA's inspection management capabilities extend to pipelines, allowing stakeholders to effectively manage inspection jobs across multiple sites. The platform enables seamless coordination, tracking of job statuses, and management of inspection profiles. By centralizing inspection data and streamlining workflows, PipeDNA optimizes the inspection process, ensuring compliance with industry standards and mitigating risks associated with pipeline integrity. Enhanced Identification and Traceability: PipeDNA's identification and traceability features enable quick and reliable identification of pipeline pipe, providing comprehensive details, activity history, and traceability documentation. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, facilitating easy tracking and identification of individual pipelines. By enhancing identification and traceability, PipeDNA strengthens quality control measures, streamlines recalls if necessary, and supports compliance with industry regulations. Seamless Integration of Manufacturing Data: PipeDNA seamlessly integrates manufacturing data into its platform, eliminating the need for manual data entry and reducing the risk of human errors. This integration ensures that pipeline-related data, including manufacturing details, is readily available within the system. By automating the transfer of manufacturing data, PipeDNA enables stakeholders to maintain accurate and reliable records, facilitating efficient pipeline pipe management and data-driven decision-making. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's popular and emerging technologies to optimize pipeline pipe inventory and inspection tracking. The platform supports barcoding and labeling systems, integrating popular barcode standards such as UPC, EAN, and QR codes. Additionally, PipeDNA is RFID ready, enabling stakeholders to seamlessly integrate RFID technologies such as labels and asset tags for efficient tracking and management of pipelines. Furthermore, the platform supports IoT data integrations using the MQTT standard, facilitating fast and reliable sensor data integration for enhanced pipeline pipe management processes. PipeDNA revolutionizes pipeline pipe inventory and inspection tracking in the oil and gas industry, providing stakeholders with a powerful cloud-based solution. By offering comprehensive inventory and tracking capabilities, efficient logistics management, streamlined inspection processes, enhanced identification and traceability, and seamless integration of manufacturing data, PipeDNA empowers stakeholders to maximize efficiency and productivity. Embrace PipeDNA and experience the benefits of improved pipeline pipe management, increased visibility, and optimized operations in the oil and gas supply chain.
Service
Currently in Use
Service
New
ASME
Air Freight
Midastream Supply Company in Airdrie
The mechanically set HORNET™ packer offers ease of operation with quarter-turn right to set and release. Converting it for wireline-setting applications is simple and inexpensive. The HORNET packer provides for landing in compression, tension, or neutral positions. Every component from the jay track, to the internal bypass, to the packing-element system and the upper slip assembly has been developed to ensure the HORNET’s setting and releasing reliability. The HORNET EL packer is run and set on electric line using an E-4™ (Product Family No. H43702) with a slow-set power charge or a J™ setting tool (Product Family No. H41371) and a special wireline adapter kit. An L-10™ type on/off seal nipple is run on top of the packer to connect the tubing to the packer and to house a blanking plug when the packer is used as a temporary bridge plug. We can source from current stock or direct from the manufacturer.
Buy
Made to Order
Product
New
API
Sea Freight
Voice, data, and video Services
Nulux Networks in Edmonton
Revolutionizing the Oil and Gas Industry: Nulux’s Superior Voice, Data, and Video Services In the fast-paced, high-stakes realm of the oil and gas industry, communication is not just vital; it's the pivotal axis around which safe and efficient operations revolve. The seamless interchange of data, unerring voice communication, and accurate video services are instrumental in ensuring that engineering professionals manage operations, diagnose issues, and implement strategies effectively. Welcome to Nulux Network Solutions, where we fortify your operational proficiency with unparalleled voice, data, and video services through our top-tier copper cabling network installations. The Nulux Distinction: Bridging Robust Communication with Operational Excellence Nulux, a name synonymous with excellence in telecommunications and networking, brings forth two decades of unmatched experience, especially in the realm of distributed control system (DCS) network upgrades for industrial projects across North America. Our commitment to high-quality networks is not just an offering; it’s a promise delivered consistently across projects, ensuring your communication channels remain unerring, reliable, and perpetually facilitating optimal operations. Engaging Every Facet of Communication with Comprehensive Solutions In the industrial expanses where engineering professionals of the oil and gas sector helm complex operations, Nulux's services in voice, data, and video become the unerring channels that ensure: Voice Services: Enjoy crystal-clear, uninterrupted voice communications that enable precise correspondence across various facets of your operations, ensuring every directive and update is communicated flawlessly. Data Services: Facilitate the impeccable transfer of crucial data with our high-bandwidth, reliable copper networks, ensuring real-time data transmission, storage, and retrieval without a hitch, keeping your operations, analysis, and decision-making well-informed. Video Services: Implement seamless video communication and surveillance across your operations, enabling real-time monitoring, engagement, and management, thereby ensuring safety, operational control, and effective remote management. Why Copper Networks are Integral to Your Communication Channels Nulux not only delivers impeccable voice, data, and video services but does so by leveraging the myriad benefits copper networks offer, such as: High-Bandwidth Transmission: Ensure that your data, voice, and video communications are facilitated with speeds up to 10 Gbps, ensuring real-time communication and data transfer. Long-Term Reliability and Durability: Experience uninterrupted services with a network that withstands the tests of time and operational demands, ensuring your communication channels remain perpetually robust. Ease of Installation and Cost-Effectiveness: With a network that is not only economically viable but also easy to implement, your operations gain the benefit of a communication network that is both, financially and operationally, advantageous. Connect with Nulux: Your Ally in Unerring Communication At Nulux, we understand networks, but more crucially, we comprehend the imperatives of seamless communication, especially in the demanding operational landscape of the oil and gas industry. With a team that encapsulates experience, expertise, and dedication, your network is not merely an infrastructure; it’s a relentless force propelling your operations towards unbridled success and communication clarity. Ensure your voice is heard, your data is transferred, and your visuals are seen with unmatched clarity. Engage with Nulux Network Solutions today, and let’s craft a communication network that becomes the unwavering backbone of your operational success and excellence.
Service
In Stock
Service
New
ISO
Hoca Oil Tools in Zwartemeer
Optimize Your Oilfield Operations with HOCA Oil Tools' Premium Landing Nipples In the demanding world of oilfield exploration and production, precision and reliability in downhole tools are paramount for operational success. HOCA Oil Tools leads the industry with its innovative lineup of Landing Nipples, designed to ensure seamless integration and operation within the wellbore. Tailored for various applications and environments, our Landing Nipples are key components in facilitating efficient downhole operations, setting new standards for performance and safety. HOCA's Landing Nipples: Engineered for Excellence in Downhole Operations Our Landing Nipples, available in a variety of types including 'BF', 'BR', 'ROTX', 'ROTXN', 'ROTR', and 'ROTRN', are designed to cater to diverse operational needs, from standard to heavy-duty applications. Each model is engineered with the highest quality materials to provide a secure and reliable seating point for wireline flow control devices, optimizing well performance and enhancing downhole safety. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities and challenges of downhole operations. Our Landing Nipples are a testament to our commitment to providing innovative solutions that enhance efficiency, safety, and reliability. By choosing our products, you are not just selecting tools; you are partnering with a leader in downhole technology dedicated to your operational success. Integrating HOCA’s Landing Nipples into your downhole operations signifies a step towards enhanced operational performance, safety, and cost-efficiency. With a focus on innovation, quality, and customer service, HOCA Oil Tools is your partner for advanced downhole solutions. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your oilfield operations. Partner with us to experience the unparalleled performance, reliability, and support that come with our premium Landing Nipples. Elevate your downhole operations with HOCA Oil Tools – where technology, innovation, and expertise converge to drive success in the oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
MC Injection Safety Valve 3-1/2 inch
MC Injection Valve 3-1/2 inchMidastream Supply Company in Airdrie
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer
Buy
In Stock
Product
New
API
Sea Freight
InWaTec Combined in Vechta
Streamlining Pipe Recovery: Introducing InWaTec Combined’s Innovative Split Shot Cutter Services When traditional methods fall short in the well servicing industry, innovation leads the way. InWaTec Combined is at the forefront of this innovation with our redesigned Split Shot Cutter Services, offering a superior alternative where conventional jet cutters cannot perform or are unsuitable. Our focus on customer-centric design and operational efficiency sets a new standard in pipe recovery solutions. The reinvented Split Shot Cutter encapsulates our commitment to ease of use and safety, allowing for straightforward electrical arming prior to loading the explosive segments. This feature not only enhances safety by simplifying the preparation process but also significantly reduces the time required to get the cutter downhole and ready for action. Our Split Shot Cutters are engineered for precision and reliability, designed to tackle the most challenging scenarios in pipe recovery. Their unique linear configuration enables the cutter to be placed precisely next to the collar or connection. Secured by robust inline magnets, the cutter ensures optimal positioning for a clean and targeted operation. Once detonated, the Split Shot Cutter works its magic, cleanly splitting the collar or connection. This critical action breaks the grip on the pipe, allowing for the straightforward extraction of the stuck sections. The result is a liberated wellbore, cleared of obstructions with minimal fuss and downtime. InWaTec Combined’s Split Shot Cutter Services are not just a tool but a transformative solution for well intervention. The technology is a testament to our innovative spirit and dedication to providing our clients with the most advanced and effective recovery methods available. Our cutters don’t just cut; they redefine the recovery process, offering unparalleled efficiency and effectiveness. Choosing InWaTec Combined's Split Shot Cutter Services means partnering with a company that prioritizes your operational success and safety. With our advanced technology and expert support, you can trust that even the most stubborn pipe recovery challenges will be met with a swift and satisfactory resolution. Experience the next level of pipe recovery services with InWaTec Combined, where we split the difference between complication and solution.
Service
In Stock
Service
New
API
Land Freight
S-KWIK Control Line and Cable Protector
Strap type Cross Coupling ProtectorSivam S.p.A. in Spoltore
Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.
Buy
In Stock
New
New
API
Air Freight
KEY360 Inc in New York, NY
SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT
Service
In Stock
Service
New
ISO
Grid Dirt Construction in Red Deer
BOOM AND STICKS 5.7 m (18'8") Reach boom CAB Rollover protective structure (ROPS) Mechanical-suspension seat High-resolution 203 mm (8 inch) LCD touchscreen monitor CAT TECHNOLOGY Cat Product Link™ Remote Flash Remote Troubleshoot Auto hammer stop ELECTRICAL Two 1,000 CCA maintenance-free batteries Programmable time-delay LED working lights LED chassis light, left-hand/right-hand boom lights, cab lights ENGINE Cat C4.4 single turbo engine Two selectable power modes Auto engine speed control Auto engine idle shutdown 52° C (125° F) high-ambient cooling capacity -32° C (-25° F) cold start capability Double element air filter with integrated pre-cleaner Reversible electric cooling fans HYDRAULIC SYSTEM Boom and stick regeneration circuits Boom and stick lowering check valves Auto warm up Auto two-speed travel Boom and stick drift reduction valve Slider joysticks Tool control (two pumps, one/two way high-pressure flow) SAFETY AND SECURITY Rearview and right-hand-sideview cameras Ground-level engine shutoff switch Right-hand handrail and hand hold Signaling/warning horn SERVICE AND MAINTENANCE Sampling ports for Scheduled Oil Sampling (S·O·S) Ground-level and platform-level engine oil dipsticks UNDERCARRIAGE AND STRUCTURES Tie-down points on base frame 3700 kg (8,160 lb) counterweight (Turkey only) 4200 kg (9,300 lb) counterweight
Buy
Currently in Use
Distributor
New
ISO
Sea Freight
Cleanstream B.V. in Ter Apel
Cleanstream's State-of-the-Art Laboratory Facility Offers Fast, Accurate and Environmentally-Friendly Solutions for NORM and LSA Contaminants Cleanstream is proud to announce the opening of its own laboratory facility, which offers quick and accurate identification of (NORM) sediments and deposits in and on materials and equipment. Our experts quantify and provide an environmentally-friendly solution from our product portfolio to ensure that your property is cleaned with the utmost safety and efficiency. Our laboratory services and analyses cater to all types of materials, both NORM contaminated and non-NORM contaminated. Basic Identification Our laboratory performs an analysis of metallurgy and scale deposits, including NORM / LSA samples, to identify the most effective treatment method for steel metallurgy, sediment/deposit identification, and soil characteristics. Solubility and Compatibility Analysis We perform solubility tests with our environmentally-friendly products and report on their performance. Our various eco-friendly products are readily available from our stock. Features of Cleanstream Laboratory Our laboratory is authorized to analyze NORM / LSA samples and provides screening of chemical dissolvers. We are proud of our fast turnaround time and can supply laboratory analyzes as a standard with product purchase. With Cleanstream's state-of-the-art laboratory facility, you can rest assured that your property will be treated with the most advanced and eco-friendly solutions available. Our goal is to ensure your safety while minimizing environmental impact. Trust Cleanstream for all your NORM and LSA decontamination needs!
Service
Currently in Use
Service
New
ISO
Land Freight
Midastream Supply Company in Airdrie
The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.
Buy
Made to Order
Product
New
API
Air Freight
Fiber Optic Splice on Connectors
Nulux Networks in Edmonton
Solidifying Your Fiber Optic Networks with Nulux’s Splice-On Connectors In the vast and dynamically intricate world of the Oil and Gas industry, where every drop of energy and every byte of data pulsates through extensive networks, ensuring stability, reliability, and durability in communication is pivotal. In this domain of seamless connectivity, Nulux Network Solutions, proudly presents its stellar service of Fiber Optic Splice-On Connectors, a vital link in fortifying and enhancing your fiber optic networks. Unveiling the Potency of Splice-On Connectors Splice-on connectors employ the refined technology of fusion splicing to facilitate the installation of standard fiber optic connectors even amidst the rigors of the field. In essence, they provide exceptionally low-loss terminations, becoming a fundamental component, particularly in sprawling and multifaceted fiber optic networks where every decibel of loss is critical. Not just a technological solution, splice-on connectors, when adeptly utilized in the right environments, endow the network with a termination that is not only highly durable but can also stoically endure the harsh and often unyielding conditions, so synonymous with the oil and gas sector. Nulux’s Splice-On Connectors: A Synthesis of Technology and Reliability Nulux Network Solutions, steeped in its unwavering commitment to providing products, solutions, and services across the entirety of the energy value chain, seeks to uplift and support the Oil and Gas sector by ensuring that every bit of your data, every communication, is transmitted with absolute integrity. Choosing Nulux for your Fiber Optic Splice-On Connectors means: Embarking on Sustainable Connectivity: Our services go beyond mere installations and solutions; we are your partners in charting a course towards a sustainable future, ensuring that every connection, every splice, is a step towards enhanced operational and environmental efficacy. Optimizing Network Performance: Our splice-on connectors, renowned for their low-loss terminations, ensure that your complex networks are bolstered with optimal performance, minimizing loss and maximizing data transmission integrity. Enduring Harsh Realities: The rugged durability of our splice-on connectors assures that even amidst the most austere and challenging conditions, your terminations remain steadfast, ensuring continuous, unimpeded connectivity. Forge Ahead with Confident Connectivity In an industry where data and communication flow with an undercurrent of criticality akin to the resources being extracted, processed, and transmitted, Nulux Network Solutions stands as a beacon of reliable, sustainable, and superior quality connectivity solutions. Join us in a journey where every splice is a testament to robust, unyielding, and impeccable connectivity, ensuring that every bit of data courses through your networks with precision and reliability, even in the most stringent of environments. Navigate through the pulsating veins of your operations with Nulux’s Fiber Optic Splice-On Connectors – because when it comes to connecting the vital lifelines of your operations, we ensure that every connection counts.
Service
In Stock
Service
New
ISO
CWB National Leasing in Winnipeg
Enhance Your Workspace with Desk Leasing from CWB National Leasing Creating an Efficient and Productive Office Environment with Flexible Furnishing Solutions For businesses looking to create or revamp their office spaces, having the right desks is crucial for ensuring a productive and comfortable work environment. Leasing desks through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to optimize their workspace. Here’s how leasing desks can benefit your business: 1. Quick Access to Modern Office Furniture CWB National Leasing values the importance of a well-equipped office space in enhancing productivity. They offer a fast leasing process, with decisions typically made within 48 hours of your application. This rapid service ensures that your desks can be delivered and set up quickly, transforming your office space without significant delays. 2. Increased Financial Flexibility Leasing desks with CWB National Leasing enhances your financial power. It allows you to conserve capital by opting for periodic payments over a large upfront purchase. The flexibility to add extra features or accessories to your desks for a small payment increase allows for customization to meet specific office needs and ergonomic considerations. 3. Effective Cash Flow Management Manageable lease payments over the term mean your desks start contributing to your business’s efficiency while they're being paid off. This approach helps maintain a balanced expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing desks can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease desks through CWB National Leasing is a strategic decision that equips your business with essential office furniture while maintaining financial flexibility. It ensures access to high-quality desks, vital for creating a productive and comfortable working environment, without the financial strain of a large upfront investment. This leasing approach enables enhanced office aesthetics, improved employee comfort, and increased overall productivity, helping your business to thrive in a competitive corporate landscape.
Service
In Stock
Service
New
ISO
Cleanstream B.V. in Ter Apel
Introducing BMS VerSol M: The Safe and Effective Solvent for Your Cleaning Needs Cleanstream is thrilled to introduce BMS VerSol M, a safer and more environmentally conscious alternative to harmful solvents such as methylene chloride, acetone, and MEK. Our product is a chemical solvent that provides exceptional cleaning performance while being much safer for the environment than traditional solvents that contain BTEX. BMS VerSol M is a green methylene chloride replacement that is perfect for those who are looking for a more sustainable and safer solution to their cleaning needs. BMS VerSol M is designed to clean corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is highly effective and provides a safer alternative to harmful chemicals like methylene chloride, acetone, and MEK. In addition, BMS VerSol M is a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol M is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol M today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol M and start cleaning with confidence.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Canaweld Inc. in Vaughan
Experience Precision and Professionalism with the TIG DC 202 Pulse-D Welding Machine At Canaweld, we understand the importance of precision and sleek design in welding, especially for industries like oil and gas, marine, aerospace, and medical. That's why we offer a wide range of TIG welders designed to give you the control necessary to achieve professional results with various parent metals. Our TIG welders are the ultimate choice for welders who demand excellence and quality in their work. Introducing the TIG DC 202 Pulse-D - Your Portable Powerhouse The TIG DC 202 Pulse-D is a welding machine that sets new standards in the industry. Portable, powerful, and versatile, it is the perfect tool for welders seeking exceptional TIG welds on stainless and mild steel or Stick welding. The professional pulse features, combined with HF start, make it an ideal companion for achieving high-quality welds, even on very thin steel, with no distortion. Unmatched Features for Unrivaled Performance At Canaweld, we believe in delivering welding machines that exceed expectations. The TIG DC 202 Pulse-D is packed with features that enhance your welding experience: • High Frequency (HF) for start, ensuring a smooth and efficient start to your welding projects. • Rigorously tested in (104°F/40°C) to guarantee optimal performance even in the toughest conditions. • Digital control of all welding parameters, giving you precise control over your welding process. • Dual control options: Amperage control accessible by both foot pedal and fingertip controls on the torch body, offering convenience and flexibility during welding. • Pulse TIG welding for better arc control and reduced workpiece deformation, resulting in professional welds on thin materials. • Exceptional welding characteristics in Stick mode with the most common rod in the market, adding versatility to your welding tasks. • Long-distance welding capability: Ability to use up to 165 feet (50 meters) leads without any power loss at the welding circuit, giving you freedom of movement on the job. • Digital adjustment of pre-gas, base current, welding current, slope up, pulse parameters, slope down, and post-gas with digital display for precise customization. • Arc Force automatically selects the best welding arc dynamics, optimizing your welding performance. • Visual welding current pre-setting ability for accurate and efficient parameter selection. • Fan cooled and thermally protected against overheating, ensuring durability and safety during operation. • Durable metal face panel, guaranteeing longevity and protection. • Generator compatible, providing versatility and adaptability for various worksites. Your Welding Excellence is Our Priority We take pride in our products, and the TIG DC 202 Pulse-D is no exception. To ensure your satisfaction and confidence in our welding machine, we offer a comprehensive 3-year warranty, protecting your investment and giving you peace of mind. Elevate Your Welding Experience with Canaweld Take control of your welding projects with precision and professionalism. Choose the TIG DC 202 Pulse-D from Canaweld and experience welding excellence like never before. Whether you're in the marine, aerospace, or medical industry, or any other field that demands top-tier welds, this welding machine will deliver unparalleled performance and superior results. Invest in the future of welding technology. Choose Canaweld, and unlock your welding potential with the TIG DC 202 Pulse-D. Experience precision, power, and professionalism in every weld.
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Canaweld Inc. in Vaughan
Achieve Precision and Perfection with the TIG AC/DC 201 Pulse D Welding Machine At Canaweld, we understand that precision and sleek design are paramount when it comes to welding in industries like marine, aerospace, and medical. That's why our wide range of TIG welders is meticulously designed to provide you with the utmost control necessary to achieve professional results with various parent metals. When excellence is your standard, trust Canaweld to deliver the welding solutions you need. Introducing the TIG AC/DC 201 Pulse D - Your Powerful Ally The TIG AC/DC 201 Pulse D stands as a powerful, portable, and versatile welding machine that embodies innovation and excellence. Capable of both AC and DC TIG welding on stainless steel, mild steel, and aluminum, as well as Stick welding, this unit offers unmatched versatility for welders who demand the best. The Pulse of Precision Welding The pulse features of the TIG AC/DC 201 Pulse D, combined with the HF start, make it the ultimate choice for welders seeking high-quality TIG welds, even on the thinnest materials, without any distortion. This machine sets new standards in welding performance, empowering you to tackle challenging projects with confidence and finesse. Exemplary Features for Superior Results The TIG AC/DC 201 Pulse D is equipped with an array of features that elevate your welding experience: • AC/DC capabilities, including all pulse parameters of a TIG welding machine, offering maximum versatility for various welding tasks. • Rigorously tested in (104°F/40°C) to ensure optimal performance even in the toughest conditions, so you can weld with confidence in any environment. • Excellent welding quality on aluminum, stainless steel, and other materials, providing professional-grade results every time. • The ability to weld very thin materials, especially aluminum, with precision and without compromising on quality. • Digital control of all welding parameters, including pre-flow, starting current, slope-up, welding current, base current, pulse duration, pulse frequency, slope-down, crater arc current, post-flow, AC frequency, AC balance, and more, giving you complete control over your welding process. • Generator compatible design for flexibility and adaptability in various worksites. • Excellent welding characteristics in Stick mode with the most common rod in the market, adding versatility to your welding tasks. • Digital ammeter and Hold Function of the last read value, ensuring accurate parameter monitoring and adjustment. • Automatic fan ensuring protection against overheating, saving energy, and keeping dust and debris away from the machine, enhancing its durability and performance. • Adjustable Arc Force in Stick mode, allowing you to fine-tune your welding experience for exceptional results. • Durable metal face panel, ensuring longevity and safeguarding your investment. Your Welding Excellence, Our Commitment At Canaweld, we stand by the quality and reliability of our products. That's why the TIG AC/DC 201 Pulse D comes with a comprehensive 3-year warranty, providing you with peace of mind and assurance in your welding endeavors. Elevate Your Welding Standards with Canaweld The TIG AC/DC 201 Pulse D is the epitome of precision and perfection in welding. Whether you work in the marine, aerospace, or medical industries or any other field where precision is crucial, this welding machine will exceed your expectations and deliver superior results. Invest in the welding machine that empowers you to achieve greatness. Choose the TIG AC/DC 201 Pulse D from Canaweld and experience welding like never before. Experience the pulse of precision welding and elevate your welding projects to new heights. Trust Canaweld for welding excellence. Make the TIG AC/DC 201 Pulse D your welding ally today. Unleash the power of precision welding with Canaweld.
Buy
In Stock
Manufacturer
New
ASME
Land Freight
FRN Wireline Retrievable 5.5 inch Subsurface Safety Valve
WR-SCSSSV FRNMidastream Supply Company in Airdrie
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Tubing Retrievable SCSSSV 3-1/2 inch SP
TR-SCSSSV SPMidastream Supply Company in Airdrie
The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Poseidon Robotics in Chandler
Stay Connected with Poseidon Robotics' Advanced ROV Communications Systems In the dynamic world of subsea exploration and robotics, seamless communication is the key to success. At Poseidon Robotics, we understand the critical role that robust and reliable communication systems play in the success of your Remote Operated Vehicle (ROV) missions. That's why we are thrilled to introduce our state-of-the-art ROV Communications Systems, designed to keep you connected and informed throughout your underwater operations. A Complete Communication Solution Our ROV Communications Systems are more than just individual components – they are a complete and integrated solution. The system includes telemetry units, a cutting-edge 3kV step-down transformer, and a Coarse Wave Division Multiplexer (CWDM) assembly that seamlessly feeds them. These components are carefully installed as a system and are ready to be wired, ensuring a hassle-free setup process and maximum performance. Robust Telemetry Units The heart of our ROV Communications Systems lies in our advanced telemetry units. These units are built to withstand the harsh subsea environment and are tested rigorously to ensure top-notch performance. Equipped with multiple Ethernet, video, and serial connections, our telemetry units provide a robust communication interface for your ROV, enabling seamless data transfer, control, and feedback during your underwater missions. 3kV Step-Down Transformer and CWDM Assembly Our innovative 3kV step-down transformer is a key component of the communication system. It allows for efficient and safe voltage reduction, ensuring that your subsea equipment receives the power it needs without compromising safety. The Coarse Wave Division Multiplexer (CWDM) assembly further enhances the system's capabilities by providing high-speed optical communication links, allowing for increased data capacity and transmission rates. Reliable and Efficient Integration At Poseidon Robotics, we pride ourselves on delivering products that are not only technologically advanced but also user-friendly. Our ROV Communications Systems are pre-integrated and designed to seamlessly work together, saving you time and effort during installation and setup. With our system, you can rest assured that your ROV's communication infrastructure is optimized for performance and reliability. Unleash the Power of Communication Experience the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Whether you are conducting scientific research, performing subsea inspections, or engaging in search and rescue operations, our communication solutions will keep you connected, informed, and in control. Say goodbye to communication challenges and embrace a new level of efficiency and effectiveness in your underwater missions. Choose Poseidon Robotics With a legacy of excellence and innovation, Poseidon Robotics is your trusted partner in the subsea robotics industry. Our commitment to quality, reliability, and customer satisfaction drives us to deliver cutting-edge solutions that exceed expectations. Join the growing community of satisfied customers and elevate your ROV operations with Poseidon Robotics' advanced communication systems. Stay Connected, Stay Successful Don't let communication gaps hinder your subsea missions. Embrace the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Contact us today to learn more about our products and how they can enhance your underwater operations. Stay connected, stay successful with Poseidon Robotics!
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Hoca Oil Tools in Zwartemeer
Transform Your Perforation Operations with HOCA Oil Tools' Mechanical Tubing Perforator In the competitive landscape of the oil and gas industry, achieving precise, efficient, and cost-effective downhole operations is crucial. At HOCA Oil Tools, we understand these challenges and are committed to providing state-of-the-art solutions. Our Mechanical Tubing Perforator stands out as a pinnacle of innovation, specifically designed to enhance the efficiency and accuracy of perforation operations. HOCA’s Mechanical Tubing Perforator: Engineering Precision for Downhole Success The Mechanical Tubing Perforator by HOCA Oil Tools is meticulously engineered to provide precise and efficient perforations in tubing, essential for effective production and injection operations. Crafted from robust materials and designed to withstand harsh downhole environments, our Mechanical Tubing Perforator ensures optimal performance and reliability, delivering clean, precise perforations that enhance fluid communication and well productivity. Experience the HOCA Advantage in Downhole Perforation At HOCA Oil Tools, we pride ourselves on advancing the field of downhole operations with innovative, reliable, and cost-effective solutions. Our Mechanical Tubing Perforator is a testament to this commitment, offering a level of precision, efficiency, and safety that sets new industry standards. Incorporating the HOCA Mechanical Tubing Perforator into your downhole operations signifies a move towards enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you not only acquire a tool; you gain a strategic partner dedicated to supporting your operational success with leading-edge solutions and comprehensive service. Choose HOCA Oil Tools' Mechanical Tubing Perforator for your downhole needs and join the ranks of industry leaders who trust our products to enhance their operations. Elevate your downhole operations with HOCA Oil Tools – where innovation, precision, and efficiency drive everything we do.
Buy
In Stock
Product & Service
New
API
Air Freight
ET-30 Single Stage Steam Turbine
Single Stage TurbineKessels Engineering Works Pvt. Ltd. in New Delhi
Experience Unmatched Efficiency with Kessels ET-30 Single Stage Steam Turbine: Your Powerhouse for Precision In the world of industrial steam turbines, precision, reliability, and efficiency are non-negotiable. Kessels Steam Turbines is proud to introduce the ET-30 Single Stage Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Single Stage Steam Turbines Our Single Stage Steam Turbines are the embodiment of economy and reliability, serving as mechanical drives for Pumps, Fans, Knives, Compressors, and Generators. Over the past two decades, our engineering team has tirelessly reviewed customer and consultant requirements, meticulously addressing queries while adhering to the stringent standards of API 611 and 612. Unmatched Performance, Even at Low Pressure Kessels Steam Turbines have earned their stripes across diverse industries, renowned for their exceptional performance even under challenging low-pressure conditions. With over 15 frame sizes and design options, we offer Single Stage Steam Turbines capable of handling steam conditions and applications up to a staggering 4,000 HP in single-stage configurations. Industries Served Our Single Stage Steam Turbines find their utility across a spectrum of industries, including Oil and Gas, Food Processing, Chemical Processing, Pharmaceutical, Steel, Paper, Sugar, Palm Oil, Marine, Edible Oil, Rice, and Fertilizer. Versatility in Applications Kessels ET-30 Single Stage Steam Turbines can be seamlessly integrated into an array of applications, including Pump Drives, Fan Drives, Mill Drives, Generator Drives, Compressor Drives, Knives, and Shredder Drives. Power Capabilities Our turbines boast power capabilities ranging from 100 HP (75 kW) to a formidable 4,000 HP (3000KW), with speeds of up to 17,000 RPM. They can operate efficiently under pressures of up to 65 Kg/cm2 (925 Psig) and temperatures reaching 460°C (860°F). Design Versatility With seven distinct models, including Horizontal (axial and radial split), Vertical, API 611- and 612-compliant, Overhung, and between-the-bearings wheel designs, our turbines offer a range of options to suit your specific needs. Choose between metallic or carbon seals, Electronic/Hydraulic Mechanical governors, customized steam path components, Mechanical/Electronic safety trip systems, and Direct-Drive or integral gearboxes with suitable lubrication systems. Choose Kessels for Unrivaled Excellence Choosing Kessels Steam Turbines is a commitment to excellence, innovation, and reliability. Our ET-30 Single Stage Steam Turbine exemplifies these principles, offering you: Unmatched Efficiency: Harness the power of steam with unmatched efficiency, maximizing productivity while minimizing waste. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbines ensure uninterrupted operations even in the most demanding industrial environments. Application Versatility: Adapt effortlessly to your unique requirements, confident that Kessels' expertise has you covered. Empower Your Future with Kessels In the competitive landscape of industrial steam turbines, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels ET-30 Single Stage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Sivam S.p.A. in Spoltore
Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.
Buy
In Stock
New
New
ALCiT in Mississauga
Fortify Your Datacenter with ALCiT's Qualys Partnership In the realm of datacenter security, the challenge is immense, but the stakes are even higher. ALCiT stands proudly beside Qualys, the trusted sentinel safeguarding 19,000 global businesses across 130 countries. Our partnership with Qualys redefines how you protect, monitor, and enhance your datacenter security, ensuring that vulnerabilities are addressed and threats are thwarted. Qualys: The Shield of Data Security In a world where data is the currency of progress, Qualys reigns as the fortress of protection. Trusted by global businesses and backed by relentless innovation, Qualys has earned its place as the defender of data integrity. ALCiT's partnership with Qualys brings this unrivaled protection to your datacenter. Your Datacenter: Safeguarded, Simplified, Strengthened Comprehensive Inventory: Every asset in your datacenter is meticulously cataloged and kept up-to-date. With Qualys, you gain clarity and control over your infrastructure like never before. Bug Extermination Made Easy: Say goodbye to breaches. Qualys empowers you to effortlessly detect and eliminate bugs that may compromise your datacenter's security. Real-Time Monitoring, Rapid Alerts: The digital landscape evolves, and so should your security. Qualys offers continuous network monitoring, promptly alerting you to any changes that demand attention. Prioritize Threats with Precision: Not all threats are equal. Qualys equips you with the ability to prioritize threats based on their criticality, ensuring that you tackle the most pressing vulnerabilities first. File Validation, Compliance Assured: Compliance isn't a choice; it's a necessity. Centralized file change logging allows you to adhere to compliance standards while maintaining a secure environment. Uncover Stealthy Malware: Malware often lurks in shadows. Qualys' vigilant system flags malware that might evade other defenses, ensuring your datacenter remains a fortress. Unlock Datacenter Security Excellence Today ALCiT's Qualys partnership isn't just a collaboration; it's your key to fortified datacenter security. Experience the power of innovation and protection that safeguards your digital assets and preserves your business's integrity. Experience the power of ALCiT's partnership with Qualys.
Service
Made to Order
Service
New
ISO
Midastream Supply Company in Airdrie
The manufacturer offers two types of control-line protectors — both designed to provide maximum control-line protection. The first type of protector is a unique design that combines a steel outer shell and a resilient inner liner. The second type is all metal, which provides fullover-the-coupling protection for virtually any size electrical submersible pump cable, bare tube, or encapsulated bundle configuration. The all-metal protector is also available for mid-joint applications. A variety of channels that can accommodate a combination of bare control lines and/or dual encapsulated control line is offered for each of the protectors. Both types of protectors use a tapered pin lock to provide maximum gripping force. The tapered pin lock can be installed by hand and driven to the locked position by a pneumatic hammer or a manual hammer tool. *information sourced from manufacturer
Buy
In Stock
Product
New
API
Land Freight
Custom ROV Hydraulics including Metering and Auxilary Pumps
Custom ROV HydraulicsPoseidon Robotics in Chandler
Unleash the Power of Custom Hydraulics: Poseidon Robotics' Metering and Auxiliary Pump Solutions In the depths of the ocean, where precision and reliability are paramount, having the right hydraulic system can make all the difference in the success of your subsea operations. At Poseidon Robotics, we take immense pride in introducing our cutting-edge Custom Hydraulics, including the Metering Pump and Auxiliary Pump solutions. Designed to excel in the harshest subsea environments, our hydraulic systems offer unrivaled performance, efficiency, and adaptability. Custom Engineered for Your Unique Needs At Poseidon Robotics, we understand that every subsea mission is unique, and off-the-shelf solutions may not always suffice. That's why we offer custom-engineered hydraulics tailored to your specific requirements. Our team of experts works closely with you to design and manufacture hydraulic systems that perfectly align with the demands of your subsea projects. Metering Pump: Precision at Its Best When it comes to accurate fluid control and metering, our Metering Pump stands in a class of its own. Whether you need precise dosing in underwater chemical injections, flow rate control in subsea sampling, or any other application that demands precision, our Metering Pump delivers flawless results. With unparalleled accuracy and reliability, you can trust our Metering Pump to handle the most critical tasks with ease. Auxiliary Pump: Boosting Your Subsea Power The Auxiliary Pump from Poseidon Robotics is your reliable companion when you require additional hydraulic power for your subsea equipment. Whether it's powering hydraulic manipulators, tooling skids, or other heavy-duty operations, our Auxiliary Pump is up to the task. Its robust construction and high-performance capabilities ensure seamless integration with your existing hydraulic system, expanding its capabilities to new heights. Built to Withstand the Abyss Operating in the challenging subsea environment demands hydraulic systems that can endure the pressure—both literally and figuratively. Our Custom Hydraulics are engineered and tested to withstand the extreme conditions of the deep ocean. With superior corrosion resistance, rugged construction, and advanced sealing technology, our hydraulic solutions thrive even in the most demanding underwater scenarios. Safety and Performance, Hand in Hand At Poseidon Robotics, safety is our guiding principle. Our Custom Hydraulics are equipped with cutting-edge safety features, ensuring smooth and secure operation during every subsea mission. With precise flow control and reliable power delivery, you can focus on your objectives without compromising on safety. Unlock Your Subsea Potential with Poseidon Robotics Choosing Poseidon Robotics means partnering with a company that is dedicated to pushing the boundaries of subsea technology. Our Custom Hydraulics, including the Metering Pump and Auxiliary Pump, have been engineered to optimize your subsea operations, increase efficiency, and deliver unmatched performance. Experience the Future of Subsea Hydraulics Elevate your subsea missions to new heights with Poseidon Robotics' Custom Hydraulics. Whether you are in research, exploration, or offshore engineering, our hydraulic solutions will be the driving force behind your success. Join the Subsea Revolution Join hands with Poseidon Robotics and become a part of the subsea revolution. Contact us today to explore the possibilities of our Custom Hydraulics and embark on a journey of groundbreaking discoveries beneath the waves. With Poseidon Robotics, the ocean's secrets are within your grasp.
Buy
Made to Order
Manufacturer
New
ASME
Air Freight
AMS Hydro in Vancouver
Designed for telecom applications; excellent ‘floor space savers’ for marine and vehicle applications The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board boats and vehicles. AGM technology AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. Low self-discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The selfdischarge doubles for every increase in temperature by 10°C. Low internal resistance Accepts very high charge and discharge rates. High cyclic life capability More than 500 cycles at 50% depth of discharge. *data sourced from manufacturer.
Buy
Made to Order
Product
New
ASME
Sea Freight
Log in om favoriet toe te voegen