Ballycatter.nl. Industriële marktplaats - Vind leveranciers van apparatuur en services
Secure Login System PHP
Secure Login System PHP
    ×
  • All Categories
  • Construction
  • Marine
  • Subsea
  • Process Equipment
  • Transport
  • Workover
  • Completions
  • Drilling
  • Customer Service
  • Partners
837 results of over 10,000 items

Bedrijfstype

Beschikbaarheid

Kwaliteitsgarantie

Staat

Transactie Type

Inverter and Charger Combination

MultiPlus Inverter/Chargers

AMS Hydro in Vancouver

Meer informatie

Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue

Buy

Made to Order

Product

New

ASME

Land Freight


Oil Spill Kit - 5 Gallon Bucket

Bag Oil Spill Kit, includes: Oil-Only Absorbent Pads, Oil-Only Absorbent Pillows, Oil-Only Absorbent Socks, Disposal Bags, and Nitrile Gloves

OilHungry in Stoney Creek

Meer informatie

The spill kit contains a curated selection of components designed for effective and targeted response to oil-based spills. 5 Oil-Only Absorbent Pads Size: Standard 8” x 11.5” Purpose: Swiftly absorb and contain oil-based liquids, preventing further spread and facilitating quick cleanup. 3 Oil-Only Absorbent Pillows Size: 18” x 18” Purpose: Larger pillows for enhanced absorption, particularly useful for managing larger volumes of spilled oil. 2 Oil-Only Absorbent Socks (3"x4') Size: 3 inches in diameter, 4 feet in length Purpose: Contain and control the spread of oil spills, especially effective in restricting the movement of liquids in confined spaces. Disposal Bags Purpose: Facilitate the proper containment and disposal of used absorbent materials, ensuring a responsible and hygienic cleanup process. Nitrile Gloves (1 Pair) Purpose: Essential personal protective equipment for safe handling during the cleanup, protecting hands from direct contact with oil-based substances. Advantages and Applications • The combination of pads, pillows, and socks caters to different spill sizes and scenarios, providing a versatile solution for oil-based spills. • The inclusion of larger pillows enhances the kit's capacity to address spills effectively, ensuring a swift and comprehensive cleanup process. • Nitrile gloves prioritize the safety of personnel involved in the cleanup, preventing direct contact with potentially harmful substances. • Disposal bags contribute to responsible waste management, ensuring the proper containment and disposal of used absorbent materials. The spill kit is well-suited for a range of industrial operations, where oil-based spills may occur. Its comprehensive components make it a valuable tool for addressing various spill sizes and ensuring a quick, efficient, and environmentally responsible cleanup process. The spill kit boasts a total absorption capacity, capable of absorbing up to 15 liters (3.87 gallons) of liquid. This capacity signifies the kit's effectiveness in managing spills of varying sizes, making it a reliable and versatile solution for fluid cleanup. Whether addressing smaller incidents or more substantial spills, the spill kit's impressive absorption capacity ensures a comprehensive and efficient response to liquid-based challenges. Water-Resistant Spill Kit is designed for oil-based spills, showcasing water-resistant properties. The kit's composition ensures effective cleanup of oil spills in diverse environments, including land, rivers, lakes, and oceans. By selectively absorbing oil while repelling water, it provides a reliable solution for managing oil spills in various settings, making it versatile and suitable for a wide range of spill response scenarios.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


MS-32 Multistage Steam Turbine

Back Pressure Turbine

Unleash Unprecedented Power with the Kessels MS-102 Multistage Steam Turbine: The Apex of Efficiency and Reliability In the oil and gas industry, where power and precision are non-negotiable, Kessels Steam Turbines proudly presents the MS-102 Multistage Steam Turbine – a true marvel of engineering designed to redefine excellence in the world of steam turbines. Mastering Back-Pressure Turbines Back pressure turbines have long been the cornerstone of industrial steam applications, and our MS-102 Multistage Steam Turbine takes their capabilities to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines are the linchpin between boiler units and process steam headers, revolutionizing steam utilization and power generation. Efficiency Beyond Compare At the heart of the MS-102 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning perfectly with process demands. Every unit of electrical power generated is consumed precisely as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-102 turbine is not merely a machine; it's a versatile powerhouse ready to excel in an array of applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-102 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature is invaluable when low-volume steam demands and high tolerance for pressure variations are essential. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-102 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the most demanding environments. Unparalleled Versatility: Adapt effortlessly to changing needs, be it for drive applications or eco-friendly power generation, knowing that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-102 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Coiled Tubing Straight Bar

SBA Straight Bar

Introducing the SBA Straight Bar from Marlin Oil Tools: The Essential Downhole Tool for Enhanced Well Intervention Precision Marlin Oil Tools proudly presents the SBA Straight Bar, a specially designed downhole tool that revolutionizes well intervention operations. As an integral part of the Bottom Hole Assembly (BHA), the SBA Straight Bar addresses the critical challenge of coil tubing deformation, ensuring a straighter and more effective pathway for well intervention tools. Key Features of the SBA Straight Bar: Enhanced BHA Stability: The SBA Straight Bar provides the necessary rigidity and straightness to the BHA, minimizing the risk of deformation and ensuring smoother operations. Improved Wellbore Navigation: By maintaining a straighter path, the SBA Straight Bar significantly reduces the chances of the BHA resting against the well walls or encountering obstacles during transitions. Optimal Centering: Its rigid and straight design aids in better centering of the BHA within the wellbore, crucial for the precision of well intervention tasks. Seamless Passage: The SBA Straight Bar facilitates seamless passage through wellbore expansions and recessions, including critical points like blowout preventers, enhancing operational safety and efficiency. Versatile Integration: Designed for easy integration into any BHA configuration, the SBA Straight Bar is suitable for a wide range of well intervention activities, offering unparalleled adaptability. Elevate your well intervention strategies with the SBA Straight Bar from Marlin Oil Tools, a leading-edge solution designed to combat coil tubing deformation and ensure precise downhole operations in the oil and gas industry. The SBA Straight Bar enhances BHA stability, improves wellbore navigation, and ensures optimal centering and seamless passage through wellbore transitions. This tool is an indispensable addition to your BHA, providing the rigidity and straightness necessary for effective well intervention. Choose the SBA Straight Bar for a reliable, efficient, and versatile solution to well intervention challenges. Why Choose the SBA Straight Bar from Marlin Oil Tools? Superior Operational Precision: Ensures straighter coil tubing pathways for enhanced precision in well intervention tasks. Increased Operational Safety: Minimizes the risk of BHA hang-ups and obstructions, ensuring safer operations. Adaptability to Well Conditions: Capable of navigating through complex well architectures, including areas of expansion and recession. Streamlined Well Intervention: Promotes smoother, faster, and more efficient well intervention procedures. The SBA Straight Bar by Marlin Oil Tools represents the forefront of downhole tool technology, providing operators with the means to enhance well intervention accuracy and operational success. Incorporate the SBA Straight Bar into your well intervention toolkit to achieve superior performance and outcomes.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Multiprocess 301-SL Welder

Welding Machine

Discover the Powerhouse Welding Solution: Multiprocess 301-SL by Canaweld Are you in search of an industrial-grade welding machine that brings power, intelligence, and versatility to your oil and gas operations? Look no further than the Multiprocess 301-SL by Canaweld. This heavy-duty, synergetic, and intelligent welding machine is packed with advanced features, making it the ultimate choice for professional welders in the industry. Unleash Welding Excellence The Multiprocess 301-SL is an inverter-based arc welding power source optimized for MIG, Flux-Cored, Gasless Wires, TIG lift, and Stick welding, both in manual and synergic mode. Experience exceptional welding performance and a wide range of professional functions that meet the demands of industrial workshops. Its portability and ease of transport make it a reliable companion on any job site. Master Your Craft with Ease Equipped with a 5-inch color LCD display and various automatic controls, the Multiprocess 301-SL ensures quick and easy setup and operation. Both experienced welders and novices can operate the device effortlessly, reducing parameter setting time and increasing actual welding time. Synergic control provides pre-set weld parameters, improving usability and enabling operators of all skill levels to achieve precise results. Versatility at Your Fingertips No matter your welding requirements, the Multiprocess 301-SL has you covered. With the ability to perform MIG, Flux Cored, Gasless Wires, TIG lift, and Stick Welding, this machine adapts to various applications with ease. It is designed and tested to withstand the toughest conditions, ensuring reliability even in extreme heat of 104°F/40°C. Empowering Welding Precision The Multiprocess 301-SL boasts digital control of welding parameters based on the material or gas type and wire diameter, allowing for precise and efficient welding. Its manual polarity changeover feature supports the most common gas and gasless wires, Stick electrodes, and Lift TIG processes, providing flexibility in your welding tasks. Superior Wire Feeding Mechanism Canaweld's commitment to quality extends to the machine's wire feeding mechanism. The Multiprocess 301-SL features a professional and heavy-duty wire feeding system with 37mm rolls, a sealed, powerful, and durable wire feeder motor, and replaceable double groove rolls requiring no tools for replacements. Unmatched Customization Tailor your welding experience with adjustable voltage, wire speed, wave form, and burn back in the MIG process. In the TIG process, enjoy adjustable amperage, final slope, and post flow, while the Stick welding process allows for adjustable amperage, arc force, and material thickness selection. Designed for Convenience Canaweld understands the importance of easy access and movement during welding tasks. The Multiprocess 301-SL is equipped with flip doors and a specific mechanism to assist movement, allowing you to hold the doors in place at an angle for maximum ease of access. Additionally, the machine comes with lockable swivel casters for enhanced mobility. Reliable, Durable, and Worry-Free With Canaweld's comprehensive 3-year warranty, you can weld with confidence, knowing that your investment is protected. The Multiprocess 301-SL also includes two built-in eyebolts for lifting, making transportation and storage hassle-free. Join the Ranks of Industry Professionals Experience the power, precision, and versatility of the Multiprocess 301-SL by Canaweld. This welding powerhouse will elevate your oil and gas projects to new levels of efficiency and excellence. From novices to seasoned professionals, the Multiprocess 301-SL is the ultimate choice for welders who demand the best. Unlock your welding potential today with Canaweld. Invest in the future of welding technology and experience the unmatched performance of the Multiprocess 301-SL.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


HDI 2522 Choke Position Indicator System

Choke Position Monitoring

When it comes to monitoring choke position in the oil and gas industry, the HDI 2522 Choke Position Indicator System sets the industry standard for precision and reliability. Designed as a 4" solid-state electronic choke position indicator, the HDI 2522 provides accurate readings in 1% increments from 0% to 100%, ensuring precise control and monitoring of choke position. Adaptable to Your Choke Requirements: The HDI 2522 can adapt to a variety of chokes commonly used in the oil and gas industry. With options for linear potentiometers, rotary potentiometers, or retractable potentiometers, you can be confident that our system will seamlessly integrate with your existing equipment. Say goodbye to the hassle of air lines to the position indicator, as the HDI 2522 eliminates the need for such additional infrastructure. Unmatched Certifications: We take safety seriously, which is why the HDI 2522 Choke Position Indicator System is certified to meet various international standards. It is IECEX certified as Ex ia IIC T4 Ga, ATEX certified as Ex II 1 G Ex ia IIC T4 Ga, and CSA certified as Class I, Division 1, Groups A, B, C, D T4, Ex ia IIC T4 Ga, and Class I, Zone o, AEx ia IIC T4 Ga. These certifications provide peace of mind knowing that our product meets the highest safety standards. Superior Features for Optimal Performance: • Lightweight and durable design: With a weight of only 2 lbs, the HDI 2522 is designed to be easily manageable without compromising on durability. The polycarbonate/PBT alloy case ensures impact resistance and UV stabilization for long-lasting performance. • High-resolution display: The 3-digit digital display, along with the 0-100% scale and linear analog bar graph, provides clear and precise choke position readings. The low battery indicator ensures that you are always informed about the battery status. • Extended viewing distance: The HDI 2522 allows for a viewing distance of up to 15 feet, enabling easy monitoring from a distance. • Flexible potentiometer options: The system accepts a wide range of 2k-25k ohm potentiometers, providing versatility for different choke configurations. • Maximum inline cable length: With a maximum inline cable length of 1,500 feet, the HDI 2522 offers flexibility in installation, ensuring accurate readings regardless of the distance from the gauge head to the point of measurement. Configuration Options for Enhanced Compatibility: To suit your specific requirements, the HDI 2522 offers various configuration options. Choose between 4-20mA output or 0-1 volt output, allowing seamless integration with your existing systems. Additionally, slave and secondary displays are available for expanded visibility and control. Experience the HDI Advantage: At HDI, we prioritize safety, accuracy, reliability, and low maintenance for our customers. With the HDI 2522 Choke Position Indicator System, you gain access to cutting-edge technology and unparalleled support. Our team is dedicated to providing customized solutions tailored to your unique needs. Contact us today to discuss your choke position monitoring requirements and discover how the HDI 2522 can optimize your operations. Trust Houston Digital Instruments for superior accuracy and reliability. Where Precision Meets Performance - HDI, your partner in measurement excellence.

Buy

In Stock

Manufacturer

New

API

Air Freight


Demolition equipment Leasing

Revolutionize Your Demolition Projects with Equipment Leasing from CWB National Leasing Unleash the Power of Flexibility in Your Demolition Business In the demolition industry, having the right equipment is crucial for efficiency and success. Leasing your demolition equipment through Canadian Western Bank (CWB) National Leasing offers a smart solution that aligns with your business goals and financial strategy. Here's how leasing demolition equipment can propel your business forward: 1. Quick Access to Equipment CWB National Leasing values your time. They ensure a rapid review of your application, often making a decision within 48 hours. This means you can have your demolition equipment delivered swiftly after approval, minimizing downtime and accelerating project commencement. 2. Increased Financial Leverage Leasing with CWB National Leasing enhances your buying power. It allows you to acquire the necessary equipment through manageable periodic payments, rather than a substantial upfront cost. This approach frees up capital for other investments and enables you to add extra features or accessories to your equipment with minimal additional expense. 3. Control Over Cash Flow With smaller, spread-out lease payments, your demolition equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a healthy balance between your expenses and income, crucial for business stability and growth. 4. Adaptable Payment Plans CWB National Leasing offers flexible payment options tailored to your business’s revenue cycle, including seasonal, semi-annual, or annual structures. This flexibility is particularly beneficial for businesses with fluctuating income. 5. Potential Tax Benefits Leasing can offer tax advantages by enabling you to expense lease payments instead of capitalizing the equipment cost. Always consult with a tax advisor to explore how leasing can optimize your business’s tax position. 6. Customized Payment Structures CWB National Leasing understands that no two businesses are the same. They offer customized leases that align with your specific cash flow, ensuring the terms fit your unique business model. 7. Diverse Buyout Options A variety of buyout options are available at the end of your lease, ranging from a nominal amount to up to 50% of the total equipment cost. This flexibility allows for potential ownership of your demolition equipment. 8. Fair Market Value and Flexible Payments You can defer a portion of the equipment’s cost to the lease's end, with options to purchase at fair market value or upgrade. Step-up or step-down payment options are also available if your business anticipates changes in cash flow. 9. Seasonal Payment Adjustments For businesses with seasonal revenue patterns, CWB National Leasing can tailor a payment cycle to match, such as a six-month-on, six-month-off schedule. Conclusion Leasing your demolition equipment through CWB National Leasing is a strategic decision that offers financial flexibility and operational efficiency. It allows you to stay competitive in the demolition industry by using state-of-the-art equipment while managing your finances effectively, setting your business up for sustainable growth and profitability.

Service

In Stock

Service

New

ISO


Printers Leasing

Boost Your Business Efficiency with Printer Leasing from CWB National Leasing Revolutionizing Your Document Handling with Flexible and Advanced Printing Solutions In the modern business landscape, having access to high-quality printers is essential for efficient document management and communication. Leasing printers through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses looking to enhance their printing capabilities. Here’s how leasing printers can benefit your business: 1. Fast Access to High-Performance Printers CWB National Leasing recognizes the importance of advanced printing technology in your business operations. They offer a quick leasing process, with decisions typically made within 48 hours of application submission. This ensures that your printers can be delivered and operational quickly, enhancing your productivity and meeting your document handling needs promptly. 2. Increased Financial Flexibility Leasing printers with CWB National Leasing enhances your buying power. It allows you to free up capital by opting for periodic payments over a substantial upfront purchase. The flexibility to add extra features or accessories to your printers for a small payment increase allows for customization to meet specific business requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your printers start contributing to your business’s efficiency while they're being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal variations in revenue, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing printers can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease printers through CWB National Leasing is a strategic decision that provides your business with essential printing equipment while maintaining financial agility. It ensures access to state-of-the-art printers, vital for efficient and high-quality document production, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved document quality, and increased productivity, contributing significantly to the success and growth of your business in a competitive market.

Service

In Stock

Service

New

ISO


Safe-T-Whip Installation Training

Restraint Training

Empowering Your Team with Installer Training and Certification At Safe-T-Whip & Restraints Inc., safety is at the heart of everything we do. We believe that a well-trained and qualified workforce is the cornerstone of a safe and successful oilfield operation. That's why we offer comprehensive On-Site Qualified Installer Training and Certification programs to ensure that your team is equipped with the knowledge and skills they need to handle our safety restraints with confidence. Comprehensive Training, Complete Confidence: Our training program covers all the essential aspects of Safe-T-Whip usage, maintenance, and safety procedures. We leave no stone unturned, ensuring that your team is well-versed in all the critical elements of working with our safety restraints. Topics Covered: During our training sessions, your team will learn about: • Proper use of Safe-T-Whip restraints to ensure maximum safety and effectiveness. • Tags and identification for easy recognition and compliance with safety protocols. • Inspection techniques to identify any potential issues or concerns. • Proper installation and use of anchor points for secure and reliable restraint. • Maintenance and cleaning procedures to keep the restraints in optimal condition. • Leak repair measures to address any unforeseen incidents promptly. • Annual inspection practices to maintain the highest safety standards over time. Certified for Success: After completing our comprehensive training program, your team members will receive certification, recognizing their proficiency and qualification as Safe-T-Whip installers. This certification is a testament to their commitment to safety excellence and adherence to industry best practices. On-Site Convenience: We understand that your operations may have specific needs and challenges. That's why we bring the training directly to your site, ensuring convenience and relevance for your team. Our expert trainers will work with your personnel, addressing site-specific concerns and scenarios to ensure practical application of the training. Safety First, Always: With Safe-T-Whip Installer Training and Certification, you can be confident that your team is prepared to prioritize safety in every aspect of their work. From installation and inspection to maintenance and repair, our training equips your team with the expertise they need to create a safer work environment for everyone. Choose Safe-T-Whip & Restraints Inc. for top-notch safety solutions and industry-leading training. Contact us today to schedule your On-Site Qualified Installer Training and Certification and take the first step towards a safer, more secure oilfield operation. Together, we build a safer future for the industry.

Service

Made to Order

Service

New

API

Air Freight


Bag Oil Spill Kit

Spill Kit, inclusive: absorbent pads, pillows, socks, disposal bags, nitrile gloves

OilHungry in Stoney Creek

Meer informatie

The spill kit contains, 5 Oil-Only Absorbent Pads, 3 Oil-Only Absorbent Pillows, 2 Oil-Only Absorbent Socks (3"x4'), Disposal bags, Nitrile gloves. This spill kit for effective and efficient cleanup and containment of oil-based spills in various settings. The kit, equipped with Oil-Only Absorbent Pads, Pillows, Socks, disposal bags, and Nitrile gloves, provides a comprehensive solution for managing and addressing oil spills. It can be particularly useful in industrial facilities, storage areas, transportation operations, or any environment where oil-based liquids are handled. The spill kit has a total absorption capacity, capable of soaking up 15 liters (3.87 gallons) of liquid. This means that oil-based spills, the combined capabilities of the Oil-Only Absorbent Pads, Pillows, and Socks within the kit allow for the containment and absorption of up to 15 liters of spilled liquids. This substantial capacity ensures that the spill kit is well-equipped to handle moderate to sizable spills, making it a reliable and effective solution for various industrial and environmental settings. Oil-Only Absorbent Pads Oil-Only Absorbent Pads are highly effective for the rapid cleanup of oil-based spills. Made from polypropylene material, these pads are specifically engineered to selectively absorb oils while repelling water. The pads boast a fine-fiber construction, allowing for quick absorption and retention of oil-based liquids. With a size of 12” x 12”, these pads are versatile and can be used in various settings, including industrial facilities, automotive workshops, and marine environments. Oil-Only Absorbent Pillows Oil-Only Absorbent Pillows are strategically deployed on oil-based spills for rapid absorption. Their polypropylene construction ensures targeted cleanup, selectively absorbing oils while repelling water. These pillows contribute to the efficiency and environmental responsibility of spill response in workplaces where oil-based liquids are handled. Oil-Only Absorbent Socks (3"x4') Oil-Only Absorbent Socks are placed to create a barrier, containing, and preventing the spread of oil-based spills. It allows to adapt to different surfaces, ensuring efficient and targeted spill response. These socks are integral components of spill kits and are valuable in various industries where oil-based liquids are handled. Usage of Disposal bags Disposal bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met oil-based spills. Nitrile gloves Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. Applications: • Integral part of spill kits • Used in industrial facilities, and areas handling oil-based liquids.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Slickline Accelerator

Wireline Accelerator

Maximizing Downhole Dynamics with HOCA Oil Tools B.V.'s Slickline Accelerators In the intricate and demanding world of oil and gas extraction, the precision and effectiveness of downhole operations are paramount. HOCA Oil Tools B.V. is at the forefront of this industry, offering a comprehensive range of slickline accelerators designed to enhance the performance of various jars. Our accelerators are specifically engineered to maintain a constant pull on the jars, ensuring an intensified impact upon release, which is crucial for overcoming downhole challenges. Key Benefits of HOCA’s Slickline Accelerators: Enhanced Jar Performance: Our accelerators ensure a consistent and intensified jarring action, making them essential for effectively addressing downhole obstructions and ensuring operational success. Versatile Application: Compatible with various jars, our accelerators are suitable for a wide range of downhole conditions and operational needs, from routine maintenance to complex interventions. Optimized Impact Delivery: By maintaining a constant pull, our accelerators facilitate the optimal deployment of jars, ensuring that the necessary impact is delivered precisely where it is needed. Increased Efficiency: The improved jarring action provided by our accelerators can significantly reduce the time and effort required to address downhole issues, leading to faster, more efficient operations. Durability and Reliability: Constructed with high-quality materials and engineered to the highest standards, our accelerators are built to withstand the harsh downhole environment, ensuring reliability and longevity. Customization and Compatibility: Available in various sizes and with different connection types, our accelerators can be easily integrated into existing tool strings, providing a tailored solution to meet specific operational requirements. Innovative Features of HOCA’s Slickline Accelerators: Type ‘EO’ and ‘ED’ Accelerators: These models are designed for a range of sizes from 1 1/2” to 2 1/2”, making them adaptable for different operational scales and requirements. Threaded and QLS Connections: Offering flexibility for integration with different tool strings, these connection types ensure that our accelerators can be deployed swiftly and securely in various downhole environments. Optimized Length and Weight: With lengths ranging from 22.66” to 27.95” and weights from 7.0 lbs (3.18 kg) to 24.8 lbs (11.25 kg), our accelerators are engineered for balance and effective force transmission. Robust Construction: Our accelerators are constructed to endure the rigors of downhole operations, ensuring consistent performance and durability over time. At HOCA Oil Tools B.V., we understand the complexities and challenges of downhole operations. Our slickline accelerators are a testament to our commitment to quality, innovation, and customer satisfaction. By incorporating our accelerators into your tool string, you can enhance the efficiency and effectiveness of your downhole operations, ensuring that every intervention is optimized for success. Choose HOCA Oil Tools B.V. for your downhole needs, and experience the difference that quality and innovation can make in your operations

Buy

In Stock

Product & Service

New

API

Air Freight


Pulling Tools for Internal Fishing Necks

Downhole Tools

Maximize Your Downhole Retrieval Success with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the specialized and high-stakes environment of oil and gas exploration and production, the right tools can make a significant difference in operational efficiency, safety, and cost-effectiveness. Recognizing the industry’s needs, HOCA Oil Tools introduces its line of Internal Fishing Neck Pulling Tools, expertly designed to address the challenges of downhole tool retrieval. Our products stand as a testament to our commitment to innovation, offering precision-engineered solutions to enhance your downhole operations. HOCA’s Internal Fishing Neck Pulling Tools: Precision-Engineered for Optimal Performance Crafted for the safe and efficient retrieval of downhole equipment with internal fishing necks, HOCA Oil Tools' Internal Fishing Neck Pulling Tools are essential for any downhole operation requiring tool retrieval. Engineered with the highest standards of quality and precision, these tools are designed to securely latch onto internal fishing necks, providing a reliable grip for retrieval without causing damage to the wellbore or the tools themselves. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means selecting a partner dedicated to enhancing the efficiency and safety of your downhole operations. Our commitment to quality, innovation, and customer service ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your operational toolkit positions your projects for greater success, offering the reliability and efficiency needed to tackle the complexities of modern downhole activities. With HOCA Oil Tools, you gain more than just a product; you gain a strategic advantage in your downhole operations, backed by our expertise and support. Opt for HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who trust our Internal Fishing Neck Pulling Tools to enhance their operational capabilities. Elevate your downhole operations with HOCA Oil Tools – where technology, precision, and reliability converge to drive your success.

Buy

In Stock

Product & Service

New

API

Air Freight


BMS Versol M

Versol M

Introducing BMS VerSol M: The Safe and Effective Solvent for Your Cleaning Needs Cleanstream is thrilled to introduce BMS VerSol M, a safer and more environmentally conscious alternative to harmful solvents such as methylene chloride, acetone, and MEK. Our product is a chemical solvent that provides exceptional cleaning performance while being much safer for the environment than traditional solvents that contain BTEX. BMS VerSol M is a green methylene chloride replacement that is perfect for those who are looking for a more sustainable and safer solution to their cleaning needs. BMS VerSol M is designed to clean corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is highly effective and provides a safer alternative to harmful chemicals like methylene chloride, acetone, and MEK. In addition, BMS VerSol M is a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol M is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol M today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol M and start cleaning with confidence.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


HDI 2021 Pressure Transmitter System

Pressure Transmitter

When it comes to precise and reliable pressure measurement, the HDI 2021 Pressure Transmitter System sets the standard for excellence. Built with the high-quality components that HDI is renowned for, this intrinsically safe, certified, solid-state 4-20mA transmitter ensures exceptional performance in even the most demanding applications. Tailored to Your Needs: The HDI 2021 is available in a variety of configurations, allowing customers to specify the housing that best suits their unique application requirements. With customisation options at your disposal, you can trust that the transmitter will seamlessly integrate into your operational setup. Complete Assembly for Easy Installation: Delivered as a complete assembly, the HDI 2021 Pressure Transmitter System is ready for quick and hassle-free installation. We understand the value of your time, which is why we provide a comprehensive solution that saves you effort and resources. Unparalleled Safety and Reliability: All HDI Transmitters are designed to provide unmatched safety, accuracy, reliability, and low maintenance for our users. With the 2021 Pressure Transmitter System, you can have peace of mind knowing that it meets the highest industry standards and is built to last. Versatility for Various Applications: The HDI 2021 can be customized not only for pressure measurement but also for load, force, and torque applications across different industries. Whether you are in oil and gas, manufacturing, or any other field, our team can work with you to tailor the system to your specific needs. Certifications You Can Trust: The HDI 2021 Pressure Transmitter System boasts certifications that ensure compliance and performance. It is CSA certified as Intrinsically Safe Class 1, Division 1, Groups A, B, C, and D. Additionally, an optional ATEX certification (II 1 G, Ex ia IIC T4) is available for enhanced safety in hazardous environments. Key Features: • Field repairable system, minimizing downtime and reducing maintenance costs • Wide pressure range options, including 5,000 psi, 6,000 psi, 10,000 psi, 16,000 psi, and 20,000 psi • Multiple connection types, such as 2" 1502, 2" 2002, 2" 2202, or flanged connections, providing flexibility for installation • 4-20mA output available, ensuring compatibility with your existing systems • Solid-state platform with no fluids or moving parts, guaranteeing long-term reliability and accuracy Trust HDI for Unmatched Performance: When it comes to pressure measurement, the HDI 2021 Pressure Transmitter System stands out as the pinnacle of quality and precision. Contact our experienced team today to discuss your specific application requirements and experience the HDI advantage. With our unwavering commitment to excellence, we deliver solutions that meet your needs and exceed your expectations. Houston Digital Instruments - Your Partner in Precision Measurement.

Buy

In Stock

Manufacturer

New

API

Air Freight


WI Water Injection Valve 1.75 inch

Injection Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Sea Freight


Long Haul Link Repairs

Unveiling Nulux's Robust Solution for Maintaining the Lifeblood of Your Operations: Long Haul Link Repairs In the vigorous and demanding milieu of the Oil and Gas industry, the stakes are astronomically high and the margin for error is strikingly slender. Here, communication is more than just a transfer of data; it’s the unerring lifeline that ensures smooth, synchronized, and secure operations. Introducing Nulux Network Solutions' pivotal service in the realm of Long Haul Link Repairs, ensuring that the veins of communication within your expansive operations remain unimpeded and robust, even in the face of unpredicted adversities. Embarking on a Journey of Resilient Connectivity Nulux Network Solutions, a harbinger of stellar products, solutions, and services throughout the entire energy value chain, strides with a commitment of not only delivering unparalleled network solutions but also aiding our customers in forging a path toward a more sustainable future. Long haul fiber optic links, spanning vast terrains, often traversing through some of the most inhospitable environments, form the critical backbone of communication networks in the Oil and Gas industry. Their impeccable functioning is non-negotiable, ensuring that every fragment of data from remote operational sites is conveyed precisely, securely, and without latency to where it is indispensably required. Nulux’s Long Haul Link Repair: A Vigilant Guardian of Your Communication Networks Our long haul link repair service is not merely a reactive solution to the unexpected impediments that might assail your fiber optic communications but a strategic, anticipatory shield that ensures your operations remain perpetually connected and resilient. In electing Nulux’s Long Haul Link Repair Service, you fortify your operations with: Proactive Vigilance: Monitoring and maintaining the integrity of your long haul links to predict and preemptively address potential issues before they escalate into critical failures. Rapid Response and Resolution: Ensuring that, in the event of disruptions, our team mobilizes with expeditious proficiency to diagnose, locate, and repair faults, reinstating the vitality of your communication backbone. End-to-End Expertise: Nulux’s veteran technicians, equipped with over two decades of combined experience and nuanced understanding of the challenges peculiar to the oil and gas sector, facilitate meticulous, rapid, and robust repair solutions. Comprehensive Aftercare: Post-repair, we ensure your links are not merely restored but optimized, and provide comprehensive reports and aftercare to preclude future occurrences and enhance overall network performance. Steadfast Communications with Nulux Your long haul links do more than just convey data; they ensure the heartbeat of your operations remains rhythmic and unerring. Nulux stands as a sentinel, ensuring these critical lifelines are perpetually robust, secure, and operational, safeguarding not merely your data but the seamless synchronicity of your extensive operations. Engage with Nulux Network Solutions, and let’s construct a future where your communications are not merely sustained but are resilient, where every byte of data traverses through your networks with unerring precision, and where every long haul link is more than a conduit, but a steadfast, unbreakable bond that perpetuates your operational excellence.

Service

In Stock

Service

New

ISO


DevOps as a Service

Software Development

Eleks in Toronto

Meer informatie

ELEKS DevOps as a Service: Unleash Agility and Efficiency In a world where time-to-market, efficiency, and collaboration are paramount, ELEKS emerges as your DevOps partner, driving your IT infrastructure to new heights. With DevOps consulting services tailored to empower your growth, you can elevate your operations, seize opportunities, and embrace a future of innovation. ELEKS DevOps as a Service: Igniting Your Transformation Optimise Business Costs and Performance: Whether your priority is cost optimisation or performance enhancement, our strategic guidance ensures the perfect strategy to achieve your goals. Enable responsive scaling, cost-effective support, and rapid deployment of updates, reducing Time to Value and Total Cost of Ownership (TCO). Optimise Your SDLC with Full-Cycle DevOps Solutions: Our end-to-end custom DevOps solutions transcend software development lifecycles, encompassing infrastructure configuration and support. Efficient resource management, expedited development goals, and reduced costs converge to elevate your time-to-market. Improve Operations and Ensure Scalability: ELEKS adapts DevOps consulting to your project's complexity, catering to startups and enterprises alike. Operational automation, process scaling, and robust disaster recovery strategies reinforce your agility and resilience in a rapidly changing landscape. Safeguard Your Data Security: Our DevOps consulting fortifies your infrastructure with centralised monitoring, logging, and proactive alerts. Industry-leading cybersecurity and data strategy services layer expertise, ensuring the security and stability of your IT ecosystem. Enable Agility and Faster Time-to-Market: Elevate your internal resources while harnessing the cloud's benefits with DevOps as a Service (DaaS). Automation streamlines deployment cycles for seamless collaboration, continuous improvement, agile delivery, simplified data flow, efficient documentation, and quality control. Enhance Your Service: ELEKS DevOps ensures uninterrupted high-quality customer service by automating critical processes and tasks. Our robust infrastructure maintenance keeps your services running without interruptions. ELEKS DevOps as a Service: Charting Your Course Continuous Integration (CI) / Continuous Delivery (CD): Fuel your digital transformation with automated delivery processes. By automating software versioning and service deployment, CI/CD slashes time-to-market, fostering operational agility. Infrastructure as a Code (IaC): IaC empowers early-stage testing in a production-like environment, preventing deployment issues. Applications are delivered faster, at scale, and with heightened quality, transforming your software development cycle. Continuous Monitoring: Real-time insights into your software's health, security, and transparency shape ELEKS' DevOps services. Proactively monitor, detect, and resolve performance and security issues, ensuring uninterrupted production. Containerisation/K8s: Embrace containerisation for agility and scalability. Swift software updates, resource efficiency, and superior stability converge to optimise costs while ensuring data security. Cloud Management: Seamless IT infrastructure integration with the cloud ensures performance, flexibility, security, and predictable spending. DevOps specialists free your in-house resources for critical processes and tasks. DevOps Automation: Automate testing, delivery, and deployment with DevOps automation, reducing human assistance and dramatically cutting time-to-value. Deploy updates faster, aligning with your business objectives. Expert Support and Training: Decades of software development expertise empower ELEKS' DevOps specialists. We instill industry best practices, foster knowledge and skills, and proactively resolve issues. ELEKS DevOps Consulting Process: Your Guiding Stars 1. Planning and Strategy Development: Define objectives, assess ROI, estimate timelines, and identify potential roadblocks. 2. Environment Set-up and Implementation: Create an environment for code versioning, automate processes, and establish project infrastructure. 3. Infrastructure Testing and Release Set-up: Verify product quality, ensure performance, and set up continuous testing for seamless operations. 4. Maintenance and Support: Implement updates, maintain application productivity, evaluate UX, gather feedback, and generate best practices. ELEKS DevOps as a Service: Empowering Possibilities Cloud Service Models We Work With: Our Technology-as-a-Service model accommodates diverse enterprise infrastructure needs. We specialize in IaaS, PaaS, SaaS, and DaaS, leveraging leading technologies like Amazon EC2, Google Compute Engine, Amazon Elastic Beanstalk, Google AppEngine, and more. ELEKS DevOps as a Service: Your Path to Transformation With ELEKS as your DevOps partner, you're primed to navigate the ever-changing IT landscape with unmatched agility, efficiency, and resilience. Unleash your potential and seize tomorrow with ELEKS DevOps as a Service.

Service

Made to Order

Service

New

ISO


Seamlessly Send Funds Back Home

Personal FX Services

Empowering Financial Freedom: Repatriate Funds with Dunbridge Financial's Personal Services Life as an expat or immigrant can be both exciting and challenging, but managing financial commitments across borders shouldn't be one of your worries. At Dunbridge Financial, we understand the importance of repatriating funds to support your loved ones or make essential purchases back home. Our Personal Services are tailor-made to ensure a seamless and secure process, allowing you to focus on what matters most. Repatriation of Funds - Your Bridge to Home Whether you're an expat making purchases back home or sending money to support your family, Dunbridge Financial is here to be your reliable bridge to home. Our services make it easy for you to repatriate funds with confidence and efficiency. Personal Services for Your Peace of Mind At Dunbridge Financial, we take pride in offering comprehensive Personal Services that cater to your specific financial needs. Here's why our customers choose us: 1. Live Rates with No Hidden Fees Transparency is at the heart of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and be confident that you're getting the most value for your money. 2. Security is Our Priority Your financial security is paramount to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your funds and data are managed safely and securely. Enjoy peace of mind knowing that your financial transactions are in trustworthy hands. 3. Easy to Use, Easy to Save Managing your international transactions should be effortless. With Dunbridge Financial, it is as simple as it gets. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your reliable partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for smooth and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Repatriate Funds with Ease Don't let international financial transactions be a burden. Join Dunbridge Financial today and experience a world of ease, convenience, and security. Whether you're an expat making purchases back home or supporting your family, we are here to make your financial journey a breeze. Empower your financial freedom with Dunbridge Financial. Sign up now and unlock a seamless, worry-free financial experience. Repatriate funds with confidence and ease, knowing that you have a trusted partner by your side.

Service

Made to Order

Service

New

ISO

Air Freight


Specialized e-line tool services

Empowering Operations with Advanced Solutions: InWaTec Combined’s Specialized E-line Tool Services At InWaTec Combined, we are dedicated to pushing the boundaries of operational excellence in the primary industries sector. Our specialized E-line tool services are meticulously crafted to address the unique challenges faced by operators, offering a suite of cutting-edge solutions that epitomize efficiency and redefine maintenance standards. In the heart of every successful operation lies the ability to adapt and innovate. InWaTec Combined’s specialized E-line tool services are the embodiment of this ethos. With our comprehensive array of tools, we empower operators to enhance well performance, streamline diagnostic processes, and execute interventions with unparalleled precision. Our services are not just about providing tools; they are about delivering a strategic advantage. Here’s a glimpse into our suite of specialized E-line tool services: Diagnostic Excellence: With the fast-paced evolution of well technologies, the need for accurate diagnostics has never been more critical. Our suite includes state-of-the-art logging tools that provide real-time data on well conditions, enabling operators to make informed decisions swiftly. Precision Interventions: Whether it's for perforation, plug setting, or cutting, our E-line tools are engineered for precision. We understand that each intervention is unique, and our tools are designed to deliver tailored solutions that ensure successful operations, every time. Maintenance and Recovery: Our maintenance tools, from scrapers to bailers, are selected for their reliability and effectiveness. When it comes to recovery operations, our fishing tools are second to none, providing the assurance that you can retrieve what is needed without undue delay. Customized Solutions: Recognizing that each operation has its distinct challenges, we offer customized tool services. Our expert team works closely with clients to develop and deploy tools that are specifically designed to meet the unique demands of their wells. InWaTec Combined is committed to innovation and excellence. Our specialized E-line tool services are continually evolving, incorporating the latest technologies and methodologies to stay ahead of industry demands. By partnering with us, operators gain access to a level of efficiency and maintenance capability that sets new industry benchmarks. We believe in a future where every operation is optimized for peak performance, and our specialized E-line tool services are a cornerstone of this vision. Choose InWaTec Combined for your operations, and experience the power of advanced tools and expert service that drive success.

Service

In Stock

Service

New

API

Land Freight


Servers Leasing

Elevate Your Business with Leased Servers from CWB National Leasing Are you ready to supercharge your business, enhance your operational efficiency, and boost your profits? Look no further than CWB National Leasing for all your server leasing needs. Here's why leasing servers with us is the ideal choice: Get Your Equipment Fast In today's fast-paced business landscape, swift access to cutting-edge technology is crucial for staying competitive. At CWB National Leasing, we recognize the urgency of acquiring your servers promptly. When you apply for a server lease with us, you can expect a lightning-fast decision-making process. Just how fast are we? Typically, within a mere 48 hours of your approval, we'll notify your chosen equipment dealer that payment is on its way. All you need to do is sit back and relax while your high-quality servers are delivered to your doorstep. For detailed information on our approval turnaround times, please refer to our information page. Increase Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a significant upfront purchase, consider the benefits of periodic lease payments provided by CWB National Leasing. By choosing leasing, you can unlock essential cash resources that can be invested in other critical areas of your business. But that's not all—we go the extra mile by allowing you to enhance your servers with additional features or accessories for a modest payment increase. Yes, that's right; we put the "POW" in Buying Power, offering you the flexibility to customize your equipment to meet your specific requirements. Control Your Cash Flow Effective cash flow management is pivotal for the success of any business. When you lease servers with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are designed to ensure small, manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your servers, they will start generating revenue for your business, allowing you to effortlessly balance your expenses with your income. This approach makes it easy to maintain a favorable expense-to-revenue ratio, putting you in command of your financial prosperity. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are tailored to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to seamlessly align with your revenue patterns. With CWB National Leasing, your server lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing servers through CWB National Leasing isn't just a smart business move; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully comprehend how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will assist you in navigating the tax advantages of leasing servers with confidence. In conclusion, leasing servers with CWB National Leasing is the strategic choice for business owners determined to enhance their efficiency, reduce costs, and increase profits. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on your technology; choose CWB National Leasing for all your server leasing needs today!

Service

In Stock

Service

New

ISO


Cap Lamp All-in-One Toolkit

Cap Lamp Complete Kit

Provix in New Lowell

Meer informatie

Empower Your Work with the Wisdom All-in-One Toolkit – A Comprehensive Solution from Provix Provix is proud to present the Wisdom All-in-One Toolkit, a versatile and comprehensive lighting solution tailored for professionals in mining, construction, and other demanding industries. This toolkit is designed to provide everything you need for effective and reliable illumination in various work environments. Complete Set for Varied Lighting Needs The All-in-One Toolkit includes: • A Wisdom 3A or 4A Cap Lamp, offering powerful and adjustable illumination. • A Magnetic USB Wire and Magnetic Connector for easy and secure charging. • Three lenses: Lens #1, Lens #4 (red), and Lens #6, to suit different lighting conditions and preferences. • A Power Supply with a US Plug, ensuring your lamp is always charged and ready to go. • A comfortable Head Strap for hands-free operation. High-Performance Lighting Features With a Panasonic battery of 2*3.5 = 7.0Ah, the cap lamp in this toolkit offers exceptional brightness levels of 1,800 | 12,000 | 25,000 LUX and luminosity of 50 | 265 | 533 LM. It provides long working times of 60 | 13 | 5 hours and impressive lighting ranges of 85 | 219 | 316 meters, ensuring you have the right amount of light for any task. Versatile and User-Friendly Designed for versatility, the All-in-One Toolkit caters to various professional needs, from mining and construction to emergency response and outdoor activities. The different lenses allow for customization of the light beam, enhancing visibility and efficiency in diverse working conditions. Durable and Reliable The toolkit components are built to withstand the rigors of tough working environments. The robust construction of the cap lamp and accessories ensures longevity and reliability, making this toolkit a valuable investment for professionals. Elevate Your Lighting Experience Upgrade your lighting gear with the Wisdom All-in-One Toolkit from Provix. This comprehensive set is your solution for effective, versatile, and dependable lighting in any professional setting. Visit www.provix.net to learn more about this essential toolkit and explore our range of high-quality mining equipment.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Wireless Infrastructure Design and Implementation

Redefining Wireless Infrastructure for the Oil & Gas Sector: Nulux Network Solutions Leads the Way In the modern era of the oil and gas industry, the intricate operations and vast terrains involved necessitate a robust, efficient, and secure communication network. As reliance on digital solutions becomes more pronounced, so does the need for seamless wireless infrastructure. With Nulux Network Solutions at the helm of wireless infrastructure design and implementation, the oil and gas sector can now look forward to tailored solutions that guarantee optimum connectivity. Bridging Distances and Overcoming Obstacles Geographical distances, challenging terrains, and myriad obstacles are inherent to the oil and gas industry. In such scenarios, traditional hard-line connections might prove ineffective, expensive, or even impossible. This is where Nulux’s expertise in wireless communication links becomes invaluable. With a proven track record of designing and implementing both point-to-point and multipoint radio networks, along with tower construction, rigging, and mesh networks, Nulux offers unparalleled solutions that ensure constant, uninterrupted connectivity. Harnessing the Power of Wireless Access Points As workplaces in the oil and gas sector become more dynamic, the dependency on mobile devices for tasks such as documentation review, QA-QC, and project planning is intensifying. Recognizing this need, Nulux offers top-tier wireless network designs that ensure every corner of your facility, be it the office or the expansive facility floor, remains connected. This not only boosts productivity but also paves the way for substantial time and cost savings. Point-to-Point Vs. Multipoint: Customized Solutions for Diverse Needs Understanding the distinction between point-to-point and multipoint networks is vital. While the former establishes a dedicated link between two distinct points ensuring utmost security and streamlined communication, the latter connects multiple points through a single shared line, facilitating broad-spectrum connectivity. Key Benefits of Opting for Nulux’s Wireless Infrastructure: Boosted Productivity: Seamless connectivity ensures that all personnel, regardless of their location, have unhindered access to centralized data, thereby accelerating operations. Enhanced Security: The private nature of point-to-point networks shields data from potential interceptions, guaranteeing safe data transfers. Cost-Effective Solutions: Especially in scenarios where traditional hard-line installations are impractical, wireless networks present a more economical and feasible option. In conclusion, the sophisticated nature of operations in the oil and gas industry demands nothing short of excellence in communication infrastructure. With Nulux Network Solutions, engineering professionals can expect wireless infrastructure designs that are not only advanced and reliable but are also tailor-made for the unique challenges of the sector. As the industry evolves and the need for reliable wireless tech surges, Nulux remains steadfast in its commitment to stay ahead, ensuring that the oil and gas sector remains seamlessly connected, always. Connect with us today, and let's build the future of wireless communication together.

Service

In Stock

Service

New

ISO


Reduce Carbon Footprint

Software Development

Eleks in Toronto

Meer informatie

Embrace Sustainability: Redefine Energy Management with ELEKS As the world shifts towards renewable energy sources, forward-thinking organizations are taking the lead in creating a more sustainable future. With ELEKS' software development expertise, you can navigate the path to sustainable energy solutions and significantly reduce your direct carbon footprint. Our innovative solutions empower you to embrace environmentally-friendly practices, encourage climate change awareness, and streamline energy management practices—all while cutting costs and enhancing your operational efficiency. Pioneering Sustainability with ELEKS Energy Software Development: Unlock the potential of an advanced energy management software solution that transforms your business power system into a beacon of sustainability, productivity, accessibility, and safety. Investment in Sustainable Energy Solutions: Our software development expertise guides you in making strategic investments in sustainable energy solutions, such as electric vehicles powered by emerging technologies. Join the ranks of industry leaders committed to building a greener future. Environmentally Friendly Energy Consumption: Cultivate a culture of environmentally-friendly energy consumption within your organization. Our solutions empower you to lead by example and inspire others to adopt sustainable practices. Climate Change Awareness: By embracing sustainable energy solutions, you're not only reducing your carbon footprint but also raising climate change awareness within your industry. Be a catalyst for positive change and inspire others to follow suit. Reduced Costs and Streamlined Practices: Sustainability doesn't just benefit the environment—it also benefits your bottom line. Our solutions help you streamline energy management practices, optimize processes, and reduce operational costs. ELEKS: Your Partner in Sustainability Decades of Expertise: With 30 years of experience in custom software development, ELEKS is a trusted partner in helping energy producers, distributors, and organizations optimize energy efficiency and drive sustainability. Cutting-Edge Solutions: Our software team is at the forefront of innovation, utilizing Cloud, IoT, blockchain, drones, and other cutting-edge technologies to design bespoke data-driven software solutions and energy management systems. Addressing Industry Challenges: We understand the unique challenges faced by the energy and utility industry. Our solutions are tailored to address the specific needs of various energy sources, facilities, and businesses. Embrace the Green Revolution with ELEKS ELEKS' software development expertise is your gateway to a sustainable future. By adopting eco-friendly energy solutions, you're not only reducing your carbon footprint but also contributing to a more sustainable world. Lead the way in your industry, inspire change, and partner with ELEKS to redefine energy management for a brighter future.

Service

Made to Order

Service

New

ISO


MIG/STICK 221 Welding Machine

Welder

Experience Unrivaled Power and Versatility with the MIG/STICK 221 Welding Machine When it comes to welding machines that blend power, portability, and versatility, the MIG/STICK 221 from Canaweld stands in a league of its own. As the most powerful welding machine in the MIG/STICK series, this exceptional unit is designed to handle the toughest welding tasks with ease, making it the go-to choice for welding professionals in the oil and gas industry. Powerful and Lightweight - The Perfect Combination The MIG/STICK 221 strikes the perfect balance between power and portability. With the ability to weld up to 3/8-inch steel in MIG or SMAW mode, this machine ensures a stable and reliable arc, allowing for precision in every weld. Its lightweight and portable design make it the ideal companion for light to medium-duty welding operations, whether in your garage, at home, or at your local auto body shop. Unmatched Features for Superior Performance At Canaweld, we believe in providing our customers with cutting-edge features that enhance their welding experience. The MIG/STICK 221 boasts an array of features that set it apart from the rest: • Wide range of welding amperage up to 220A, giving you the flexibility to handle various welding applications with ease. • High power output, with 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, ensuring consistent performance during demanding tasks. • Designed to withstand extreme environments, the MIG/STICK 221 is tested in temperatures of 104°F/40°C, guaranteeing reliable operation under challenging conditions. • Inverter power supply with excellent MIG and Stick welding qualities, providing smooth and precise welds. • Automatic compensation for main power fluctuations within ± 20%, ensuring a stable welding process. • Capability to use up to 165 feet (50 meters) of lead without any power loss at the weld, offering extended reach for your welding projects. • High-quality metal double drive roll system for accurate and consistent wire feed, preventing bird nesting and improving efficiency. • Welds steel and aluminum up to 3/8″ thick, allowing you to tackle a wide range of materials with ease. • Graduated knob for precise settings, giving you full control over your welding parameters. • Automatic regulation of wire speed using motor voltage feedback, providing an exceptionally steady arc with minimum splatter for high-quality welds. • Overheat prevention with a fan and thermal protection, ensuring the longevity of your welding machine. • Built-in polarity changeover feature for most common gas and gasless wires, enhancing welding flexibility. • Durable metal face panel for added protection and longevity. Elevate Your Welding Experience with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld leads the way with innovative technology and unmatched performance. The MIG/STICK 221 is a testament to our commitment to delivering excellence in every product we offer. Unlock the true potential of your welding operations with the MIG/STICK 221. Experience the power, precision, and reliability of Canaweld's welding solutions, and take your welding projects to new heights. Choose Canaweld for Your Welding Needs With a comprehensive 3-year warranty and a track record of delivering top-notch products, Canaweld is the name you can trust for all your welding requirements. Join the league of welding professionals who rely on the MIG/STICK 221 for exceptional results and unmatched performance. Upgrade your welding capabilities today with Canaweld's MIG/STICK 221. Invest in excellence and elevate your welding experience to a whole new level.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


BMS Versol T

Versol T

Introducing BMS VerSol T: The Safe and Versatile Solution for Your Cleaning Needs Cleanstream presents BMS VerSol T, the perfect replacement for harmful solvents such as NMP/NEP, glycols, and aromatics. Our solvent is designed to provide a more sustainable and safer alternative to traditional solvents that contain BTEX. BMS VerSol T is a chemical product that is fully miscible in water and/or acid and has no CLP labeling. This makes it a safe and versatile solution for your cleaning needs. Our product is a green Xylene replacement that is much safer to use and provides exceptional cleaning performance without any of the negative environmental effects of traditional solvents. In addition to being safe for the environment, BMS VerSol T is highly effective in cleaning corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is specially formulated to provide the same level of cleaning performance as traditional solvents without any of the harmful effects. BMS VerSol T is also a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative environmental effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol T is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol T today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol T and start cleaning with confidence.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


Dunbridge Financial's Personal Services

Foreign Investment Management

Discover Seamless Financial Freedom with Dunbridge Financial's Personal Services Are you ready to take control of your international finances and experience a world of convenience and security? Look no further than Dunbridge Financial's Personal Services, designed to simplify your financial transactions and empower you to make the most out of your money. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in complete transparency. That's why our personal services offer live exchange rates with no hidden fees. What you see is what you get – ensuring that you get the most value for your money without any unpleasant surprises. Whether you're sending money overseas, paying bills in another country, or managing international investments, our live rates put you in control of your financial decisions. Security is Our Top Priority We understand that the safety of your funds and personal data is paramount. Rest assured, at Dunbridge Financial, your security is our top priority. Our payment service partners are compliant with ISO27001, a globally recognized standard for information security management systems. With this robust security framework in place, your client funds and data are managed safely and securely, giving you peace of mind with every transaction. Easy to Use, Easy to Save Simplicity and efficiency are at the core of our personal services. Dunbridge Financial's user-friendly platform allows you to send money to over 100 countries quickly and effortlessly. With just a few clicks, you can choose where and who you're sending money to, lock in your exchange rate, and you're done! Managing your international finances has never been this easy. Explore the World of Foreign Investment Management As part of our personal services, Dunbridge Financial offers a range of foreign investment management solutions to suit your needs: 1. Manage Your Investments Abroad Take full control of your investments in your home country while living abroad. With our seamless platform, you can easily monitor and manage your investment portfolio from anywhere in the world. 2. Offshore Investments Diversify your investment portfolio by exploring offshore opportunities. Our platform allows you to use various currencies to invest in international markets and broaden your financial horizons. 3. Mortgage Payments for Vacation Villas and Investment Properties Dreaming of owning a vacation villa or investment property in another country? Dunbridge Financial can help you pay your mortgage conveniently and securely, so you can turn your dream into a reality. 4. Payroll and Expenses in Your Preferred Currency Working abroad or receiving income from multiple countries? Our personal services enable you to receive your pay and manage your expenses in your currency of choice, minimizing exchange rate fluctuations and maximizing your financial control. Embrace a world of financial flexibility with Dunbridge Financial's Personal Services. Let us handle the complexities while you enjoy the simplicity and savings. Take charge of your international finances with confidence, knowing that our secure platform and transparent live rates have your best interests at heart. Unlock Financial Freedom Today Join Dunbridge Financial and explore a new realm of financial freedom. Sign up now to experience seamless transactions, secure fund management, and effortless foreign investment management. Your financial journey begins here, with Dunbridge Financial's Personal Services at your side.

Service

Made to Order

Service

New

ISO

Air Freight


Gas Tight Casing Patch GTX-SPAN

GTX-SPAN

Looking for a heavy-duty, permanent solution for sealing splits, holes or perforations in your tubing and casing? Look no further than the GTX-SPAN System Tubing/Casing Patch from ID OILTOOLS! Our GTX-SPAN System is the first effective gas tight patch on the market, thanks to the premium sealing elements in each component. Each element contains two elastomer seals, providing superior gas shut off capabilities. The GTX-SPAN System is incredibly versatile, and can be run on electric wireline, tubing, or coil tubing, and set with a pressure setting tool (electrical, mechanical, or hydraulic). The large bores ensure easy passage of tools and equipment, minimizing restriction to fluid flow. Customizable for most well applications, including premium alloys, restrictions, and geothermal well applications, our GTX-SPAN System Tubing/Casing Patch is the solution you need for your sealing needs. Our system consists of three basic components: a top metal element with an expandable elastomer seal, a tubular extension, and a bottom metal element with an expandable elastomer seal. Various patch lengths can be obtained by adding tubular extensions, making it a modular and versatile solution for any well. During the setting process, the pressure setting tool exerts a pushing force on the top tapered metal swage and a pulling force on the bottom tapered metal swage. Both swages are driven into the metal sealing elements (with expandable elastomer seals), which expand outward into the casing wall, providing both a metal-to-metal and an elastomer seal. At a predetermined force, a calibrated weak point shears, and the setting process ceases. A collapsible setting collet located in the bottom swage retracts and allows the setting equipment to be retrieved. The interval is now fully isolated with metal and expandable elastomer seals. ID OILTOOLS highly recommends the use of a casing scraper before patch installation to rid the interval of foreign matter and the use of a casing caliper to provide an accurate record of casing I.D. and conditions. A gauge ring or drift run is a minimum requirement. Choose the GTX-SPAN System Tubing/Casing Patch from ID OILTOOLS for the first effective gas tight patch on the market. Contact us today to learn more!

Buy

In Stock

Product & Service

New

API

Sea Freight


Dump trailers Leasing

Enhance Your Operations with Dump Trailer Leasing from CWB National Leasing Streamline Your Material Handling and Transportation with Flexible Leasing Solutions For businesses in construction, landscaping, or any industry that requires the regular transportation of heavy materials, dump trailers are indispensable. Leasing dump trailers through Canadian Western Bank (CWB) National Leasing offers a strategic, flexible, and financially sound solution. Here’s how leasing dump trailers can elevate your operational efficiency and profitability: 1. Rapid Equipment Delivery CWB National Leasing understands the importance of keeping your operations running smoothly. They offer a quick and efficient leasing process, with decisions on applications typically made within 48 hours. This swift turnaround means your dump trailers can be delivered and operational quickly, minimizing downtime and enhancing productivity. 2. Increased Purchasing Power Leasing dump trailers with CWB National Leasing allows you to leverage your buying power. Opting for periodic payments instead of a large upfront purchase frees up capital for other important business needs. Plus, you have the option to enhance your trailers with additional features or accessories for a small increase in payments, tailor-making them to your specific requirements. 3. Balanced Cash Flow Management With smaller, manageable lease payments spread over the term, your dump trailers start to contribute to your business’s revenue while still being paid off. This strategy helps maintain a healthy expense-to-revenue ratio, crucial for long-term business stability and growth. 4. Flexible Payment Options CWB National Leasing offers various payment plans, including seasonal, semi-annual, or annual options, to match your business’s revenue cycle. This flexibility is especially beneficial for businesses with fluctuating or seasonal income, ensuring that payments align with your financial capacity. 5. Potential Tax Advantages Leasing dump trailers can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor can provide insights into how leasing can enhance your business’s tax position. Conclusion Opting to lease dump trailers through CWB National Leasing is a strategic choice that equips your business with essential material handling equipment while maintaining financial agility. It ensures access to state-of-the-art dump trailers, vital for efficient operations, without the financial burden of a large upfront investment. This approach paves the way for enhanced operational capabilities, business expansion, and increased profitability in your industry.

Service

In Stock

Service

New

ISO


3-1/2 inch injection valve

WI safety valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Automate Mass-Payments and Empower Your Workforce

Business FX Services

Transform Your Business with Dunbridge Financial: Automate Mass-Payments and Empower Your Workforce As a forward-thinking business, staying ahead of the competition means embracing automation and efficiency in every aspect of your operations. With Dunbridge Financial, you can revolutionize the way you pay employees and sub-contractors. Our financial service allows you to automate mass-payments, ensuring your workforce is paid promptly and accurately in their local or preferred currency. Automate Mass-Payments for Streamlined Operations Time is a valuable asset, and we understand that managing individual payments can be time-consuming and prone to errors. With Dunbridge Financial, you can automate mass-payments effortlessly, saving you precious time and resources. Say goodbye to manual payment processing and embrace the future of streamlined operations. Pay Employees and Sub-Contractors in Local or Preferred Currency We believe in empowering your workforce and sub-contractors by offering payment options that suit their preferences. With Dunbridge Financial, you can pay employees and sub-contractors in their local currency or their preferred currency, ensuring that they receive their earnings with ease and convenience. Why Choose Dunbridge Financial for Automated Mass-Payments? 1. Seamless Automation Our platform is designed to automate your mass-payments with ease. Whether you're paying a large group of employees or multiple sub-contractors, our system streamlines the process, reducing manual intervention and minimizing errors. 2. Flexible Payment Options At Dunbridge Financial, we prioritize the preferences of your workforce. By offering payments in local or preferred currencies, you enhance employee satisfaction and foster positive relationships with sub-contractors. 3. Real Accounts in Your Company's Name Our financial service provides real accounts in your company's name, giving your business a professional and credible image. Your employees and sub-contractors will appreciate the clarity and transparency of receiving payments from your company. 4. Expert Support Navigating the world of automated mass-payments can be complex, but not with Dunbridge Financial. Our dedicated account managers are here to provide you with expert guidance, ensuring a smooth and successful implementation of automated payment processes. Join Us Today and Embrace Financial Efficiency Don't let manual payment processing slow down your business. Join Dunbridge Financial today and experience the power of automated mass-payments. Streamline your operations, pay your workforce accurately and efficiently, and elevate your business to new heights. Seize the Opportunity with Dunbridge Financial By choosing Dunbridge Financial, you gain a strategic advantage in managing your payments. Embrace automation, enhance employee satisfaction, and boost operational efficiency. Experience the Difference Unlock a world of financial efficiency and automation with Dunbridge Financial. Sign up now and embrace the future of streamlined mass-payments. Empower your workforce, simplify your payment processes, and elevate your business to new levels of success. The future of financial efficiency starts here.

Service

Made to Order

Service

New

ISO

Air Freight


Flare Gas Capture

Gas Recovery Equipment

Unlock Value from Flare Gas with Lovat Gas Solutions Flare gas, often associated with oil production, holds tremendous potential for conservation and revenue generation. At Lovat Gas Solutions, we specialize in flare gas capture and can help your company devise a comprehensive plan to conserve this valuable resource and turn it into a source of revenue. In many jurisdictions, energy regulators require producers to conserve associated gas to enable oil production. If your company has oil wells or fields that are shut in due to excess gas production, we are here to assist you. Our team of experts will work closely with you to develop a conservation and revenue plan that aligns with your company's objectives. Why choose Lovat Gas Solutions for your flare gas capture needs? 1. Expertise in Flare Gas Capture: Our team possesses deep expertise and knowledge in flare gas capture. We understand the unique challenges associated with capturing and monetizing this resource. With our experience and technical know-how, we can help you devise an effective plan to conserve flare gas and unlock its value. 2. Compliance with Energy Regulations: We stay up-to-date with the latest regulations and requirements set forth by energy regulators. Our solutions are designed to help you meet regulatory obligations while optimizing the use of flare gas to enhance your operations and revenue streams. 3. Conservation and Revenue Generation: Lovat Gas Solutions is dedicated to helping you turn flare gas into a valuable asset. By capturing and conserving flare gas, we can develop a plan that not only helps you meet regulatory standards but also generates revenue for your company. 4. Tailored Solutions: We recognize that every oil well or field is unique, and so are the requirements for flare gas capture. Our team will work closely with you to understand your specific circumstances and develop a customized plan that maximizes the potential of your flare gas while aligning with your business goals. By partnering with Lovat Gas Solutions, you can: • Conserve valuable resources by capturing flare gas • Comply with energy regulations and demonstrate environmental responsibility • Generate additional revenue streams from previously wasted gas • Enhance the sustainability and profitability of your operations Contact us today to discuss your flare gas capture needs. Our team of experts is ready to collaborate with you to devise a conservation and revenue plan that suits your company's requirements. With Lovat Gas Solutions as your trusted partner, you can unlock the full potential of flare gas and maximize the value of your operations.

Service

Made to Order

Product & Service

New

ASME

Land Freight


QUP Retrievable Bridge Plug

QUP Plug

Looking for a reliable and high-quality retrievable bridge plug for your completion needs? Look no further than ID OilTools' QUP Plug System! Our QUP Plug System is specifically designed to provide pressure control or tubing anchoring in completions where nipple profiles are either damaged or not available. This means that our plug can be used in a variety of applications, including wellbore isolation, straddle systems, instrumentation suspension, artificial lift systems, orifice downhole chokes, downhole check valves, and pump open subs. The QUP plug can be easily conveyed to depth on standard electric line setting tools or on hydraulic setting tools for use with coiled tubing. Retrieval of the plug is just as easy, using a standard GS-pulling tool and standard retrieval procedures. Plus, our patented releasing mechanism makes it easy to fit a variety of equalizing or pump through-subs on the bottom of the plug. But the benefits of our QUP Plug System don't stop there! Our plug system boasts a number of additional features and capabilities, including a slip-lock design, equalizing assembly options, and elements built to NACE MR0175 specifications. Plus, our proprietary HSN and Fluoroelastomer elements ensure that our plug system can withstand even the harshest conditions, with a maximized thru bore for maximum production. So if you're in need of a reliable, high-quality retrievable bridge plug, look no further than ID OilTools' QUP Plug System. Contact us today to learn more!

Buy

In Stock

Product

New

API

Sea Freight


NORM Decontamination Services

Naturally Occuring Radioactive Material Cleaning

As the oil, gas, and geothermal industries continue to grow, the risk of contamination from Naturally Occurring Radioactive Material (NORM) also increases. That's why Cleanstream is proud to introduce our innovative, qualitative, and rapid cleaning services for Low Specific Activity (LSA) and NORM contamination. Our advanced cleaning methods comply with LSA/NORM regulations, ensuring safety for people and the environment. We invest heavily in new methods to continuously guarantee quality. Our own radiation experts, at Radiation Protection Expert (RPE) and Radiation Protection Officer (RPO) level, always carry out the decontamination and final release. At Cleanstream, we understand the importance of cleaning without damage. That's why we've developed our own inventive cleaning methods to prevent materials from getting damaged during the cleaning process. Our experienced employees have extensive knowledge of decontamination and are involved in disassembling and decontaminating contaminated materials originating from oil and gas wells so that the metal can be recycled. Our services are both rapid and cost-effective. Because all work activities are carried out by our own staff at our 20,000 m2 premises in Ter Apel, the communication lines and turnaround times are short, resulting in considerable cost-savings for our clients. Cleanstream is licensed to clean all types of NORM/LSA contaminated materials. Cleaned objects are released by means of a certificate, showing that your material has been cleaned in accordance with laws and regulations. At Cleanstream, we are committed to embracing change and constantly improving to meet the demand. Join us in our mission to promote safety, quality, and green solutions. Contact us today to experience our innovative and efficient cleaning services for NORM/LSA contaminated materials.

Service

In Stock

Service

New

ISO

Land Freight


Thru-Tubing MatrixStixx 2 inch

Acid Stick 2 inch

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionize Your Operations! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! StimStixx Technologies is proud to present our cutting-edge Thru-Tubing Acid Stimulation system, designed to meet all your needs with ease and precision. Our innovative product offers a hassle-free deployment process via electric wireline, ensuring a seamless integration into your operations. Available in both HCL and HCL/HF acid blends, our solution guarantees the utmost effectiveness in achieving your desired results. At the heart of our Thru-Tubing Acid Stimulation system lies a specially formulated solid acid stick. Whether you're using slickline, wireline, coil tubing, or tractor-conveyed methods, our solid acid stick delivers heated acid vapor with pinpoint accuracy directly to the zone of interest. This groundbreaking approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the heated acid vapor. Not only does our system deliver exceptional performance, but it also provides numerous benefits that will enhance your operations in more ways than one. By utilizing our Thru-Tubing Acid Stimulation, you'll experience reduced CO2 emissions, lower downtime, and simplified implementation. The increased precision and fast-acting nature of our solution will save you valuable time and resources, while also reducing manpower, rig, and equipment costs. Additionally, the elimination of contaminated effluent means a reduced risk of spills at the surface and eliminates the need for post-treatment clean-up or disposal. Join the countless businesses already benefiting from our Thru-Tubing Acid Stimulation system. Embrace efficiency, precision, and environmental responsibility with StimStixx Technologies. Contact us today to revolutionize your operations and unlock a new level of success!

Buy

In Stock

Manufacturer

New

API

Sea Freight


Plasma machines Leasing

Enhance Your Cutting Precision with Plasma Machine Leasing from CWB National Leasing Streamlining Your Fabrication Process with Flexible and Advanced Equipment Solutions For businesses involved in metalworking, fabrication, or automotive industries, plasma cutting machines are essential for precise and efficient cutting operations. Leasing plasma machines through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to enhance their cutting capabilities. Here’s how leasing plasma machines can benefit your business: 1. Quick Access to High-Precision Equipment Understanding the need for efficient and precise cutting operations, CWB National Leasing provides a rapid leasing process. With decisions typically made within 48 hours of application submission, your plasma machines can be delivered and operational quickly, minimizing downtime and boosting productivity. 2. Increased Financial Flexibility Leasing plasma machines with CWB National Leasing enhances your financial power. It enables you to spread costs over manageable periodic payments rather than a substantial initial purchase, freeing up capital for other essential business operations. The option to add extra features or accessories to your machines for a small payment increase allows for customization to meet specific production demands. 3. Effective Cash Flow Management Manageable lease payments over the term mean your plasma machines start contributing to your business’s revenue while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, essential for the financial health and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing plasma machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease plasma machines through CWB National Leasing is a strategic decision that equips your business with essential cutting equipment while maintaining financial flexibility. It ensures access to advanced plasma machines, vital for precise and efficient metal cutting, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business excel in the competitive metalworking and fabrication industry.

Service

In Stock

Service

New

ISO


Cleanouts

Streamlining Well Maintenance: InWaTec Combined’s Mini-Coil Services for Well Cleanouts In the pursuit of operational excellence within the oil and gas industry, well maintenance stands as a critical routine to ensure continued productivity and longevity of wells. InWaTec Combined’s Mini-Coil Services are specifically tailored for well cleanouts, offering a highly effective solution for the removal of debris and buildup that can impact well performance. Optimized Fluid Delivery: Our Mini-Coil Tubing is expertly designed for the precise placement of cleanout fluids, delivering them directly to the areas of buildup. This targeted approach is key to dissolving or dislodging blockages and ensuring a thorough well cleanout process. High-Pressure Cleaning: One of the standout features of our Mini-Coil Tubing is its ability to operate under much higher pumping pressures compared to standard tubing. This is particularly advantageous during well cleanouts where higher pressures can be required to remove stubborn or compacted debris. Efficiency in Production Lifting: Post-cleanout, it's often necessary to facilitate the well's return to optimal production levels. The Mini-Coil Tubing not only excels in delivering cleanout fluids but also in lifting wells back into production, making the transition from maintenance to output both seamless and efficient. Navigating Limitations: While the Mini-Coil Tubing may have limitations in terms of flow rate and snubbing capabilities due to its smaller size, InWaTec Combined has honed the application of this technology to maximize its benefits. Our experts are adept at customizing operations to work within these parameters while still achieving exceptional results. At InWaTec Combined, we understand that time is a precious commodity in well operations. Our Mini-Coil Services for well cleanouts are designed to minimize downtime, ensuring that maintenance is carried out swiftly and effectively, reducing the impact on production schedules. Our commitment to delivering innovative solutions is reflected in our Mini-Coil Services. We not only provide the tools but also the strategic expertise to ensure that every cleanout operation is a success. With InWaTec Combined, operators can rest assured that their wells will be maintained with the highest level of precision and care. Choose InWaTec Combined for your well cleanout needs and benefit from our advanced Mini-Coil Services. We bring to your operations a blend of precision, power, and efficiency that ensures your wells remain clean, clear, and productive. Let us partner with you to maintain the heartbeat of your well operations, ensuring uninterrupted flow and optimal performance.

Service

In Stock

Service

New

API

Land Freight


Injection Valve Subsurface Safety 4.48 inch

WI Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Multiprocess 231 SLM Welding Machine

Welder

Introducing the Multiprocess 231 SLM: Your Ultimate Welding Powerhouse for the Oil and Gas Industry Are you seeking a welding machine that can do it all? Look no further than the Multiprocess 231 SLM by Canaweld. Our multi-process welding machines are the all-in-one solution you've been searching for, capable of handling MIG welding, MIG Brazing, Flux Cored welding, Flux Cored Gas Less welding, TIG welding, and Stick welding with ease. Unleash the Power of Versatility At Canaweld, we take pride in offering a wide range of multi-process welders to cater to your specific needs. Whether you require an industrial heavy-duty model, a high-tech, programmable welder with an LCD panel, or a portable unit, our production lines have got you covered. Our multi-process welders handle a variety of materials, from mild steel, stainless steel, and aluminum (with or without a spool gun) to chrome molybdenum, titanium, and copper alloys. Empowering Your Welding Journey The Multiprocess 231 SLM represents the pinnacle of welding innovation. This high-tech, synergetic, powerful, and portable inverter welder is equipped with an LCD panel and a convenient saving program facility. Its unmatched capabilities allow for Stick welding, MIG welding, Flux cored welding, and TIG welding with lift start in manual or synergic mode. Experience the perfect balance of simplicity and precision with synergic control and job programming, making it ideal for welders of all experience levels. Save time and costs on machine setup as the LCD display walks you through the process step by step, automatically adjusting parameters to meet your specific needs. It's like having your own personal welding expert right beside you! Adaptable to Your Work Environment The Multiprocess 231 SLM is designed to accommodate your work environment, featuring selectable voltage options of 230 V (±15%) or 115 V (±15%). It doesn't matter where your welding projects take you; this versatile machine adapts seamlessly to any single voltage electrical network. From novice welders to professional production welders, this unit is the ultimate choice for those who demand speed and exceptional quality. Built for Excellence Experience unrivaled welding performance with Canaweld's spool gun compatibility, ensuring trouble-free Aluminum MIG welding. The machine's robust, professional, and heavy-duty wire-feeding mechanisms guarantee smooth and reliable wire feeding, while the 'Energy Saving' function optimizes power source cooling fan operation for efficient energy usage. Total Control at Your Fingertips The Multiprocess 231 SLM puts you in control with its array of adjustable parameters. From voltage, wire speed, wave form, and burn back in the MIG process to material, wire diameter, gas, 2T/4T in MIG, and current, down slope, and post gas in TIG, this welder empowers you to achieve flawless welding results, no matter the project. Designed for Endurance Tested to withstand the toughest conditions, the Multiprocess 231 SLM is built to excel even in extreme heat of 104°F/40°C. Its metal face panel adds to its durability, ensuring it can handle any challenging environment. Our Commitment to Quality At Canaweld, we stand by the quality and reliability of our products. That's why the Multiprocess 231 SLM comes with a comprehensive 3-year warranty, providing you with peace of mind. Discover the Future of Welding Elevate your welding projects to new heights of efficiency and excellence with the Multiprocess 231 SLM by Canaweld. Embrace the power of versatility, precision, and control. Don't settle for ordinary; choose the welding powerhouse trusted by professionals in the oil and gas industry. Experience the Multiprocess 231 SLM for yourself. Invest in the welding machine of tomorrow, backed by Canaweld's dedication to innovation, quality, and customer satisfaction. Unleash your welding potential with the Multiprocess 231 SLM by Canaweld.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Wisdom Lamp 4A Retail Blister Pack

Lamp 4A

Provix in New Lowell

Meer informatie

Illuminate Your World with the Wisdom Lamp 4A Retail Blister Pack – Now at Provix Provix is delighted to present the Wisdom Lamp 4A Retail Blister Pack, the ultimate lighting solution for a range of activities. Whether you're into rock climbing, night fishing, diving, or need reliable lighting for construction and emergency rescue, the Lamp 4A is your go-to source of illumination. Complete Package for Versatile Use The Lamp 4A Retail Blister Pack includes a 3A or 4A Cap Lamp, a magnetic USB charger, and a head strap. This comprehensive package offers everything you need for hands-free lighting in various environments. The easy-to-use head strap ensures the lamp stays secure, whether you're scaling a cliff or navigating a dark construction site. User-Friendly and Efficient Charging Charging the Lamp 4A is hassle-free. Simply connect the magnetic head to the lamp's charging interface and the USB connector to a Wisdom power adapter or any USB port. This flexibility allows you to charge your lamp at home, in the office, or even in your car. Outstanding Technical Specifications The Lamp 4A boasts impressive technical data, ensuring it meets your lighting needs: • Rated Capacity: 7,000mAh • Rated Voltage: 3.7V • LED Working Current: HI 1,400 mA, ME 570 mA, LO 80 mA • Initial Lighting Degree in 1m: HI 25,000 lx, ME 12,000 lx, LO 1,800 lx • Light Luminous Flux: HI 533 lm, ME 265 lm, LO 50 lm • Continuous Discharging Time: HI 5 hours, ME 13 hours, LO 60 hours • Light Power: HI 4.2W, ME 1.17W, LO 0.24W • Charging Time: 5 hours • Weight: 169g (5.96 oz) • Dimensions: 84x69x50mm (3.3x2.7x2.0in) Safety and Durability With a short circuit protection time of less than 320μs and a battery lifespan of 1,200 cycles, the Lamp 4A is not only safe but also durable. Its robust construction ensures it can withstand the rigors of various activities and work environments. Your Ideal Companion for Any Adventure or Task The Wisdom Lamp 4A Retail Blister Pack is an essential tool for anyone needing reliable and versatile lighting. Available now at Provix, this pack is perfect for all your adventures and professional tasks. Visit www.provix.net to learn more and get your hands on this indispensable lighting solution.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Coiled Tubing Surface Filter

SFF Surface Filter

Introducing the SFF Surface Filter from Marlin Oil Tools: The Ultimate Solution for Protecting Your Downhole Equipment Marlin Oil Tools is proud to offer the SFF Surface Filter, a highly efficient tool designed to safeguard your downhole equipment by filtering mechanical particles from the liquid flow. Engineered with precision, the SFF Surface Filter is an essential addition to any oil and gas operation, ensuring the longevity and reliability of your valuable downhole tools. Key Features of the SFF Surface Filter: Advanced Filtration Technology: Utilizes a wire wound welded to the frame, creating gaps smaller than the permissible size of particles, thereby capturing and retaining mechanical impurities as the liquid flows through. Customizable Filtration Levels: Offers versatile filtration options with membrane fineness primarily available in 0.25 mm, 0.5 mm, and 0.9 mm, allowing operators to select the appropriate level of filtration for their specific well conditions. Durable and Reliable Design: Crafted for durability and long-term use, the SFF Surface Filter stands up to the demanding conditions of oil and gas extraction environments. Protects Sensitive Downhole Tools: Especially beneficial for tools that are highly sensitive to mechanical impurities, such as downhole mud motors with Metal-to-Metal power sections and downhole gas separators. Easy Installation: Designed for straightforward installation in the pipeline running from the pump to the well, ensuring seamless integration into your existing workflow. Enhanced Operational Efficiency: By preventing mechanical particle contamination, the SFF Surface Filter contributes to the smooth operation and reduced maintenance needs of downhole equipment, ultimately saving time and costs. Elevate the protection and efficiency of your oil and gas operations with the SFF Surface Filter from Marlin Oil Tools, a premier downhole tool solution engineered to filter mechanical particles from liquid flows. Featuring advanced filtration technology and customizable filtration levels, the SFF Surface Filter is designed to meet the rigorous demands of the oil and gas industry, ensuring the protection and longevity of sensitive downhole equipment. Whether you're dealing with downhole mud motors, gas separators, or other critical tools, the SFF Surface Filter offers a reliable, durable, and easy-to-install solution to maintain clean liquid flows and enhance operational efficiency. Opt for the SFF Surface Filter and invest in the safety and productivity of your downhole operations. Why Choose the SFF Surface Filter from Marlin Oil Tools? Superior Protection: Provides unmatched filtration to protect downhole equipment from mechanical impurities. Operational Versatility: Adaptable to a wide range of oil and gas operations with customizable filtration to suit diverse needs. Long-lasting Durability: Built to withstand the harsh conditions of oil and gas extraction, ensuring reliability and longevity. Cost-Efficient Maintenance: Reduces the need for frequent downhole tool maintenance, saving both time and operational costs. The SFF Surface Filter by Marlin Oil Tools represents the forefront of filtration technology in the oil and gas industry, providing a vital solution for maintaining the integrity and efficiency of your downhole equipment. Choose the SFF Surface Filter for an enhanced level of protection and operational excellence in your well interventions.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Equalizing Sub-Assembly

Downhole Tools

HOCA Oil Tools: Innovating Efficiency with State-of-the-Art Equalizing Subs In the ever-evolving landscape of the oil and gas industry, the need for precision and efficiency in downhole operations is paramount. At HOCA Oil Tools, we recognize this imperative and respond with our innovative Equalizing Subs. These tools are specifically designed to enhance the operational capabilities of sub-surface controls like Locking Mandrels and Tubing Mandrels, ensuring seamless and efficient downhole activities. HOCA’s Equalizing Subs: Engineered for Unmatched Performance Our Equalizing Subs are crafted to facilitate the equalization of pressure differentials across Sub-Surface Controls, crucial for the safe and effective retrieval of these components. Available in various types, including 'ROTB', 'ROTF', 'ROTC', 'ROTD', and others, each is designed to meet distinct downhole conditions and operational needs, ensuring versatility across different well environments. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools' Equalizing Subs means selecting a solution backed by innovation, quality, and unwavering support. Our commitment to excellence ensures that our products not only meet but exceed the stringent demands of the oil and gas industry. Whether addressing standard operations or facing unique downhole challenges, our Equalizing Subs provide the reliability and performance essential for today's downhole activities. Incorporating our Equalizing Subs into your operational toolkit is a step towards enhanced efficiency, safety, and success. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your downhole challenges with cutting-edge solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations. Partner with us to harness the power of advanced downhole solutions designed for the modern oilfield landscape. With HOCA Oil Tools, empower your downhole operations with tools that redefine efficiency, reliability, and performance in the oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Subsurface Safety Valve for Injection Wells 5.4 inch

WI Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Seismic Sensors for Subsea

Seismic Sensors

Unveiling the Depths of Earth's Secrets: Poseidon Robotics' Seismic Sensors for Subsea Exploration At Poseidon Robotics, we are dedicated to unlocking the mysteries of the underwater world and empowering the subsea exploration community with cutting-edge technology. Today, we are proud to introduce our latest innovation - Seismic Sensors for Subsea. These advanced sensors are engineered to delve into the very heart of the ocean floor, bringing you invaluable data for seismic analysis and geological studies. Understanding Earth's Subsurface like Never Before Seismic exploration plays a pivotal role in comprehending the Earth's structure and its dynamic processes. Poseidon Robotics' Seismic Sensors for Subsea open up a whole new realm of possibilities, enabling you to gain unprecedented insights into the subsea environment. Whether you're involved in offshore oil and gas exploration, scientific research, or environmental monitoring, our sensors are designed to deliver accurate and reliable seismic data. Robust Design for Extreme Environments Operating in the harsh conditions of the subsea realm demands exceptional durability and reliability. Our Seismic Sensors are meticulously designed and built to withstand the pressures of the deep ocean and maintain optimal performance even in challenging environments. The rugged and robust construction ensures that the sensors can endure the rigors of subsea missions and deliver uninterrupted data acquisition. Seamless Integration with ROV Systems Efficiency is key in subsea exploration, and our Seismic Sensors are designed with that in mind. The sensors seamlessly integrate with your existing ROV system, eliminating any compatibility concerns and streamlining your operations. With easy installation and setup, you can swiftly deploy the sensors and start collecting valuable seismic data in no time. High-Precision Data Acquisition Accurate seismic data is crucial for making informed decisions and conducting thorough analyses. Poseidon Robotics' Seismic Sensors are equipped with state-of-the-art technology that ensures precise data acquisition. The sensors capture seismic waves with exceptional clarity, providing you with detailed information about subsurface structures and geological formations. Customized Solutions for Diverse Applications We understand that every subsea exploration project comes with its own set of challenges and requirements. That's why our team of experts works closely with you to tailor the Seismic Sensors to meet your specific needs. Whether you need sensors for deep-sea research or shallow-water surveys, we have the expertise to provide customized solutions that align with your objectives. Pioneering Subsea Innovation with Poseidon Robotics As leaders in subsea robotics, Poseidon Robotics continues to push the boundaries of exploration technology. With our Seismic Sensors for Subsea, we stand at the forefront of innovation, enabling scientists, researchers, and industry professionals to unravel the mysteries of the underwater world like never before. Explore the Depths of Knowledge Take your subsea exploration to new heights with Poseidon Robotics' Seismic Sensors. Discover the vast potential that lies beneath the ocean floor and gain the knowledge you need to make informed decisions in your field of study or industry. Contact Us Today Unleash the power of seismic exploration with Poseidon Robotics' Seismic Sensors for Subsea. Contact our team now to explore how our advanced technology can elevate your subsea missions and pave the way for groundbreaking discoveries. With Poseidon Robotics as your partner, the secrets of the deep ocean are within reach.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Tubing Retrievable SCSSSV 3-1/2 inch SP

TR-SCSSSV SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Lock Mandrels for Landing Nipples

Downhole Tools

Enhancing Downhole Operations with HOCA Oil Tools' Lock Mandrels for Landing Nipples In the intricate landscape of oilfield operations, achieving peak efficiency and maintaining well integrity are of utmost importance. HOCA Oil Tools, a leader in downhole slick line tools, introduces its Lock Mandrels for Landing Nipples, designed to meet these challenges head-on. These Lock Mandrels are crafted for precision, reliability, and durability, ensuring they meet the diverse needs of modern downhole activities. HOCA's Lock Mandrels for Landing Nipples: Tailored for Excellence Our Lock Mandrels are engineered to be set into pre-positioned landing nipples within the wellbore, providing a secure and reliable platform for the deployment of various downhole tools and instruments. Available in multiple types such as 'ROTR', 'ROTRN', 'ROTX', and 'ROTXN', our Lock Mandrels cater to a wide range of downhole conditions and operational requirements. They can be selected based on the specific flow control accessory attached, making them either Selective or No-Go types to suit different operational strategies. Experience the HOCA Oil Tools Difference By integrating HOCA Oil Tools’ Lock Mandrels into your downhole toolkit, you're choosing a product backed by our commitment to quality, innovation, and customer service. These mandrels are not just tools but solutions designed to enhance the efficiency and safety of your downhole operations. Our Lock Mandrels for Landing Nipples represent the intersection of innovation and practicality, providing the reliability and performance essential for today's oilfield challenges. Choose HOCA Oil Tools for your downhole needs and experience the difference that quality and expertise can make in your operations. Embrace the future of downhole operations with HOCA Oil Tools, where technology meets tradition to drive success in the oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Stickwelder 162 D

SMAW Welder

Unleash the Power of Versatility with the Stickwelder 162 D! At Canaweld, we understand the diverse welding needs of the construction, oil & gas industries, and more. That's why we are thrilled to introduce the Stickwelder 162 D - a welding marvel that offers high-quality performance across a wide range of metals and thicknesses, ensuring impeccable results in every project. Portable Powerhouse The Stickwelder 162 D is designed to be your reliable companion, offering portability, power, and versatility in one compact unit. Whether you require Stick Welding or TIG welding with a lift start, this welding machine rises to the occasion, delivering consistent and exceptional welds. Safety and Efficiency Combined We understand the challenges of adverse conditions, which is why we've equipped the Stickwelder 162 D with an extra function that reduces power draw, ensuring safer and more efficient performance in challenging environments. When precision matters, trust the Stickwelder 162 D to get the job done. Ideal for Light to Medium Duty Projects From construction sites to oil & gas projects, the Stickwelder 162 D is the ideal choice for light to medium-duty projects, providing reliability and flexibility in all weather conditions. Its lightweight construction and convenient carrying belt make transportation a breeze, ensuring you can take this welding powerhouse wherever the job demands. Weld with Confidence Enjoy excellent arc characteristics with the most common rods up to 5/32 inches, providing you with the confidence to tackle a variety of welding tasks. Experience low power consumption, making it energy-efficient and eco-friendly. Ready for the Outdoors The Stickwelder 162 D is designed to work outdoors with the appropriate power generator, offering you the freedom to take on welding projects wherever they may be. It's fan-cooled and thermally protected, ensuring durability and performance even in demanding conditions. The Canaweld Promise With Canaweld's Stickwelder 162 D, you can rely on the Canaweld promise of excellence and durability. Our comprehensive 3-year warranty further solidifies our commitment to quality and customer satisfaction. Get the job done right with the Stickwelder 162 D. Embrace the power of versatility, portability, and efficiency, and elevate your welding experience with Canaweld. Whether you're on a construction site or in the oil & gas industry, trust the Stickwelder 162 D to deliver flawless welds. Choose the welding machine designed with your needs in mind - the Stickwelder 162 D. Welding Perfected!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Structured Cabling

Structured Cabling by Nulux Network Solutions: The Bedrock of Your Resilient Network Infrastructure in the Oil and Gas Industry In the intricate and unrelenting realm of the oil and gas industry, the backbone of successful, uninterrupted operations rests on a sturdy network infrastructure. Not merely a conduit for communication, but a veritable lifeline that ensures every unit, every device, and every system communicates seamlessly, securing the continuous flow of vital data across every echelon of your business. This is where Nulux Network Solutions champions your endeavors through our unparalleled expertise in Structured Cabling. Nulux Network Solutions: Your Harbor in the Tempest of Network Demands Your venture into the industrious domains of energy extraction and refinement is formidable, laden with challenges that demand a network just as robust and reliable as the spirited teams operating within. Nulux, with a lauded heritage of over two decades, curates tailored copper cabling networks, ensuring that your network infrastructure stands unwavering amidst operational rigors. While our specialization permeates various strands of telecommunications and networking, structured cabling, particularly utilizing copper, becomes a focal point for businesses that demand: High-Bandwidth Transmission: Facilitating transmissions up to 10 Gbps, ensuring your data flows unrestrained. Reliability: A steadfast performance, ensuring your operations are never hampered by network downtimes. Cost-Effectiveness: A pragmatic solution that assures optimal performance without burdening operational costs. Copper Cabling by Nulux: The Confluence of Flexibility, Durability, and Affordability Structured cabling, particularly utilizing copper, furnishes your business with a network that is not just remarkably flexible, easily terminated, and reliable, but also phenomenally durable, ensuring that the infrastructure remains unfazed amidst the most demanding operational scenarios. Nulux enhances this inherent virtue of copper cabling by ensuring: Holistic Network Solutions: From the embryonic stages of design and planning to installation and life cycle support. Upgrades & Evolution: Ensuring your network is never obsolete, perpetually evolving in tandem with technological advancements. Tailored Solutions: Customizing solutions that cater explicitly to your voice, data, and video service requirements, ensuring no aspect of your operations is ever compromised. Immerse Your Operations in a Cocoon of Network Security and Reliability Navigating through the complexities of DCS network upgrades and deploying copper cabling systems, encompassing telephone, ethernet, coax, and hybrid networks, Nulux has not just crafted but meticulously refined our approach towards network solution delivery. Our commitment towards delivering high-quality, high-performance networks at affordable rates has been unwavering and resolute. Steer Your Business Towards Operational Excellence with Nulux Your business, deeply embedded in the vital sectors of energy, seeks more than just a service provider. It seeks a partner that comprehends the profundity of operational demands and curates solutions that are not merely effective but exemplary. Nulux Network Solutions invites you to experience a partnership where your network demands are met with solutions that are not merely about connectivity but about ensuring your operational pulse never falters. Reach out to us today, and let’s architect a network that becomes the silent, steadfast guardian of your operations, ensuring every bit of data traverses with reliability, every communication occurs seamlessly, and your business thrives amidst the operational challenges of the energy sector.

Service

In Stock

Service

New

ISO


Pressure and Temperature Memory Gauge Service

Enhancing Well Performance Insights with InWaTec Combined’s Memory Gauge Services At InWaTec Combined, we recognize that the quest for efficiency within the oil and gas sector hinges on the precision of data collected from the depths of the earth. This is precisely why we offer top-tier Pressure and Temperature Memory Gauge Services—a tool crucial for optimizing well productivity and ensuring operational integrity. Our electronic Memory Gauges are engineered to withstand the rigorous conditions of the downhole environment, providing accurate records of pressure and temperature. These robust instruments are the sentinels of the wellbore, vigilantly recording data that is vital for the evaluation of well performance and reservoir behavior. The utilization of Memory Gauges is central to gauging bottomhole pressures and temperatures across varying production rates. This data is instrumental in conducting build-up and drawdown tests, which are essential for assessing well productivity. With the insights garnered from these tests, operators can make informed decisions about stimulation, enhancement, and management of their well systems. InWaTec Combined’s Memory Gauges are not just instruments; they are the bearers of information that can significantly impact the economics of well operations. By accurately capturing downhole conditions, our gauges assist in pinpointing production issues, facilitating timely interventions that can forestall costly downtime and mitigate potential hazards. Our commitment at InWaTec Combined is to provide our clients with not just data, but solutions that translate into cost savings, increased safety, and environmental protection. Investing in our Memory Gauge Services means investing in the longevity and prosperity of your wells. Let us partner with you to harness the full potential of your reservoirs with precision, reliability, and expertise that you can trust.

Service

In Stock

Service

New

API

Land Freight


StimStixx MatrixStixx

MatrixStixx

Introducing the Revolutionary MatrixStixx by StimStixx Technologies - Unleash the Power of Pinpoint Accuracy! Are you ready for a groundbreaking advancement in well treatment technology? Look no further than the MatrixStixx by StimStixx Technologies. Our specially formulated product is designed to deliver heated acid vapor with unparalleled precision, revolutionizing the way you approach well stimulation. With an outer dimension of 3.625 inches, our MatrixStixx is compatible with various conveyance methods, including slickline, wireline, coil tubing, and tractor conveyance. This versatility ensures that you can seamlessly integrate our solution into your existing operations, maximizing efficiency and minimizing downtime. The true power of our product lies in the highly reactive nature of the heated acid vapor it delivers. As it interacts with contaminants and carbonate scale, it penetrates with increased effectiveness and establishes optimal contact with the formation. This enhanced penetration translates to superior results, allowing you to unlock the full potential of your wells. But the benefits don't end there. The heated acid vapor, thanks to its high reactivity and relatively low volume, quickly vaporizes and becomes fully spent down-hole. This eliminates the need for post-treatment clean-up or disposal, reducing the risk of spills at the surface and ensuring a hassle-free operation. Experience the confidence of knowing that no contaminated effluent remains, enabling you to focus on what matters most - the success of your well stimulation. With the MatrixStixx by StimStixx Technologies, you can wave goodbye to costly and time-consuming post-treatment procedures. Join the ranks of forward-thinking industry leaders who trust StimStixx Technologies to deliver unrivaled accuracy, efficiency, and environmental responsibility. Elevate your well treatment to new heights with the MatrixStixx - the future of precision well stimulation is here.

Buy

In Stock

Product & Service

New

API

Air Freight


Bilge Absorbent Boom

Bilge Oil Absorber absorbs oil leaks from the engine and/or dripping oil

OilHungry in Stoney Creek

Meer informatie

OH-BGE Bilge Absorbent Boom is engineered to address the specific challenges of oil accumulation in the bilge, arising from engine leaks and oil changes. With its unique design and technical specifications, this product is your ally in safeguarding the environment. Technical Specifications: Part Number: OH-BGE Product Type: Absorbent Bilge Fluids Absorbed: Oil-Based Liquids Volume Absorbed per Unit: 1.59 gallons Color/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Neutralizing: No Floating: Yes UV Resistant: No Size: 10” x 44” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes Applications: • Marine vessels • Boats • Oil-powered machinery In the maritime tapestry where vessels traverse vast waters, a silent guardian emerges—the OH-BGE Bilge Absorbent Boom. Beyond its utilitarian role, this product narrates a story of efficiency, environmental consciousness, and unwavering commitment to technical excellence. Can is known for its testament to precision in oil cleanup. Meticulously crafted, it targets oil floating in the bilge, whether a result of engine leaks or the aftermath of oil changes. A Polypropylene Filler ensures optimal absorption, leaving the bilge spotless and safeguarding marine environments from potential contamination. Very handy to learn that the OH-BGE, equipped with an integrated loop of rope, effortlessly finds its place in the bilge. This seamless application isn't merely convenient; it's a strategic move to efficiently absorb oil before water circulates back to the ocean, lake, or river. Choosing the OH-BGE isn't merely a cleanup decision; it's a commitment to safeguarding our waters. This absorbent boom becomes a catalyst for environmental protection, actively contributing to the preservation of aquatic ecosystems. With every use, it signifies a pledge to a cleaner and more sustainable maritime future. the OH-BGE becomes an investment in environmental stewardship. It transcends being a product and emerges as a strategic choice for compliance with rigorous environmental regulations. This proactive step shields against potential fines tied to oil pollution, aligning fiscal prudence with ecological responsibility. OH-BGE orchestrates a symphony of technical prowess. Tailor-made with a specific size of 10” x 44” and an impressive volume absorption of 1.59 gallons per unit, it becomes an exemplar of efficient and targeted oil cleanup in the bilge. This isn't just a boom; it's a harmonious blend of technical excellence and environmental responsibility. Choose OH-BGE – where every ripple narrates a tale of environmental stewardship.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


MS-201 Multistage Steam Turbine

Back Pressure Turbine

Elevate Your Operations with the Kessels MS-201 Multistage Steam Turbine: Unmatched Power and Efficiency In the ever-evolving world of the oil and gas industry, precision and performance are paramount. At Kessels Steam Turbines, we're proud to introduce the MS-201 Multistage Steam Turbine, an engineering marvel that redefines excellence in steam turbine technology. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and our MS-201 Multistage Steam Turbine takes them to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency That Sets a New Standard At the heart of the MS-201 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-201 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-201 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-201 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


Safe-T-Whip Qualified Installers

Restraint Install Personnel

Expert Safe-T-Whip Qualified Installers: Your Gateway to Safety and Efficiency At Safe-T-Whip & Restraints Inc., we not only offer top-of-the-line safety restraint systems but also a comprehensive service that ensures your worksite meets all safety standards. Renting or owning your own Safe-T-Whip system is a step towards enhanced safety, but qualified installation personnel are essential to ensure compliance with local safety codes. That's where our expert qualified installers come in to make a real difference. Your Safety, Our Priority: We understand the criticality of safety in the oilfield, and that's why we provide the option of sending our qualified installers to your site to perform the rig up and down. Their expertise and experience ensure that every aspect of the installation process meets the highest safety standards, giving you peace of mind that your workforce is protected. Empowering Your Crew: Alternatively, we can certify one of your own crew members to become proficient installers through our Safe-T-Whip certification process. We provide comprehensive training that equips them with the knowledge and skills needed to perform installations efficiently and effectively. Once trained, they'll be able to rig up and down the system confidently, ensuring maximum safety for your operations. Quick and Easy Installation: The Safe-T-Whip system is designed with simplicity and efficiency in mind. Whether our qualified installers handle the setup or your certified crew members take charge, you'll quickly discover just how quick and easy the installation process can be. Understanding the flow of the links and checking for complete link coverage becomes second nature with our training. Ensuring Your Safety: Your worksite's safety is at the core of our service. No matter which installation option you choose, we are here to help you every step of the way. Rest assured that with our qualified installers or your certified crew, your Safe-T-Whip system will be installed correctly, ensuring maximum protection for your team and equipment. Lightweight and User-Friendly: The entire Safe-T-Whip system is designed to be lightweight and user-friendly. Hauling and installing it require just a single person, enhancing convenience and making it a practical safety solution for your oilfield operations. Choose Safe-T-Whip & Restraints Inc. for Enhanced Safety: With Safe-T-Whip qualified installers, you gain access to a team of experts who prioritize your safety above all else. Contact us today and discover how we can make your worksite safer and more efficient. At Safe-T-Whip & Restraints Inc., your safety is our commitment.

Service

In Stock

Service

New

API

Air Freight


Coiled Tubing Hydraulic Vibration Tool

HVT Coiled Tubing Tool

Introducing the HVT (Hydraulic Vibration Tool) from Marlin Oil Tools: Revolutionizing Well Intervention and Completion Operations Marlin Oil Tools is proud to present the HVT (Hydraulic Vibration Tool), an advanced downhole tool designed to significantly enhance the efficiency and reach of well intervention and completion operations. The HVT stands out for its ability to create controlled vibrations when liquid is pumped through it, reducing the friction coefficient across the Bottom Hole Assembly (BHA) and ensuring extended reach in long horizontal wells. Here’s a closer look at the HVT’s features, benefits, and why it’s an essential tool for your oil and gas operations. Key Features of the HVT (Hydraulic Vibration Tool): Friction Reduction: The HVT generates vibrations that significantly reduce the friction coefficient, facilitating smoother and longer reach of the BHA in horizontal wells. Versatile Application: With options for larger diameters, the HVT can also be utilized as part of the casing shoe, ensuring that the casing reaches the planned depth during well completions. Exceptional Durability: Engineered to withstand harsh downhole conditions, the HVT is resistant to nitrogen, acid, and hydrogen sulfide, offering unlimited working time in challenging environments. Compact and Efficient: The tool’s short length makes it an ideal choice for operations requiring high maneuverability and efficiency. Elevate your well intervention and completion processes with the HVT (Hydraulic Vibration Tool) from Marlin Oil Tools, a cutting-edge solution designed to overcome the challenges of extended reach in horizontal wells. By creating controlled vibrations, the HVT reduces friction, enhancing BHA maneuverability and ensuring casing is accurately placed during well completions. Its resistance to nitrogen, acid, and hydrogen sulfide guarantees reliability in even the most demanding environments, while its compact design promotes operational efficiency. Choose the HVT for unparalleled performance and durability in your oil and gas operations. Why Choose the HVT from Marlin Oil Tools? Enhanced Operational Reach: Maximizes the effectiveness of well interventions in horizontal sections. Increased Completion Success: Assists in achieving accurate casing placement for optimal well completions. Reliable in Harsh Conditions: Offers unmatched durability against nitrogen, acid, and hydrogen sulfide. Streamlined Design: Facilitates ease of use and integration into existing operations without extensive modifications. The HVT (Hydraulic Vibration Tool) by Marlin Oil Tools represents the forefront of innovation in downhole tool technology, providing operators with a powerful solution to enhance the reach and success of well interventions and completions. Incorporate the HVT into your toolkit to achieve operational excellence and maximize the potential of your oil and gas wells.

Buy

Made to Order

Manufacturer

New

API

Land Freight


3.78 WI Valve

Storm Choke

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product & Service

New

API

Land Freight


Slickline Jars

Wireline Jars

Maximizing Downhole Efficacy with HOCA Oil Tools B.V.'s Slickline Jars In the ever-evolving landscape of oil and gas exploration and production, the precision and reliability of downhole operations are paramount. At HOCA Oil Tools B.V., we pride ourselves on our extensive expertise and innovative solutions in the field of slickline technology, particularly our diverse array of slickline jars designed to address a wide range of downhole challenges. Unparalleled Benefits of HOCA's Slickline Jars: Enhanced Operational Efficiency: Our jars significantly reduce non-productive time by enabling more effective and quicker responses to downhole sticking issues. Improved Downhole Dynamics: With the capability to deliver upward and downward jarring forces, our slickline jars optimize the impact on the obstruction, ensuring successful resolution of downhole incidents. Versatility Across Conditions: Designed for a variety of wellbore environments, our jars ensure optimal performance regardless of the downhole conditions. Superior Material and Construction: Crafted from high-grade materials, our jars withstand the extreme pressures and temperatures encountered downhole, ensuring durability and longevity. Customization for Specific Needs: Our extensive range accommodates different sizes and operational requirements, ensuring that every operation has the precise tool needed for the job. Safety and Reliability: Engineered to meet rigorous industry standards, our slickline jars enhance the safety and reliability of wireline operations. Diverse Array of Slickline Jars: Hydraulic Jars: Ideal for controlled, consistent jarring actions in sticky situations, providing the necessary force while minimizing risk to the toolstring and wellbore. Mechanical Jars: Known for their robustness and reliability, suitable for a variety of downhole conditions, offering immediate response to obstructions. Spring-Loaded Jars: Designed for situations requiring fast, sharp impacts, these jars are perfect for dislodging stuck tools or debris. Intensifier Jars: Amplify the impact force, ideal for extreme conditions where additional power is needed for jarring actions. Bi-Directional Jars: Capable of delivering both upward and downward forces, providing versatility and efficiency in clearing obstructions. At HOCA Oil Tools B.V., our commitment to innovation, quality, and customer service is at the core of our business philosophy. Our slickline jars are testament to this commitment, designed not only to meet but exceed the operational demands and challenges faced by our clients in the oil and gas industry. With HOCA Oil Tools B.V., you are choosing a partner dedicated to providing you with the best in slickline technology solutions. Explore our range of slickline jars and discover how we can enhance the efficiency and safety of your downhole operations.

Buy

In Stock

Product & Service

New

API

Air Freight


Helmet Strap with 5x Strap Hooks

Helmet Strap

Provix in New Lowell

Meer informatie

Secure Your Lighting with the Wisdom Helmet Strap – Now at Provix Provix is proud to offer the Wisdom Helmet Strap with 5x Strap Hooks (model NWI-ZCZ073-SET5), an essential accessory for miners and construction workers. This helmet strap is specifically designed to provide a secure and reliable way to attach mining cap lamps to helmets, ensuring consistent illumination in challenging work environments. Designed for Convenience and Safety The Wisdom Helmet Strap is crafted with practicality in mind. It features five strap hooks that offer a firm grip, keeping your cap lamp securely attached to your helmet. This design not only ensures that your light source remains stable and positioned correctly but also enhances safety by preventing the lamp from becoming a distraction or hazard during work. Universal Compatibility Engineered for versatility, this helmet strap is compatible with a wide range of mining cap lamps. Whether you’re using a Wisdom lamp or another brand, the adjustable nature of the strap ensures a snug and secure fit, making it a universal solution for your lighting needs. Durable and Long-Lasting Constructed with high-quality materials, the Wisdom Helmet Strap is built to endure the rigors of mining and construction environments. Its durability ensures it can withstand daily wear and tear, providing reliable performance over time. Easy to Use and Adjust The helmet strap is designed for ease of use. The hooks can be easily attached to most safety helmets, and the adjustable strap allows for a comfortable fit, regardless of head size. This ease of use ensures that you can quickly set up your cap lamp and get to work without any hassle. Enhance Your Work Efficiency The Wisdom Helmet Strap is more than just an accessory; it’s a necessity for anyone who relies on helmet-mounted lighting. Its secure fit and durability make it an ideal choice for miners, construction workers, and other professionals who need reliable lighting solutions. Get Your Wisdom Helmet Strap Today Visit Provix to get your hands on the Wisdom Helmet Strap with 5x Strap Hooks. Enhance the functionality of your mining cap lamp and ensure a safe, illuminated work environment. Check out our website at www.provix.net for more information and to explore our wide range of mining equipment.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Surface Controlled Annular Vent and Sleeve Valve 2 inch

Annular Sleeve Valve

An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


Wisdom EX Cap Lamp

Wisdom EX Cap Lamp, 7.0Ah, Class I, II, III, Division I, CSA C22.2, UL 913, -20C-40C

Provix in New Lowell

Meer informatie

Illuminate Your Work with the Wisdom EX Cap Lamp – A Robust Solution from Provix Provix is excited to introduce the Wisdom EX Cap Lamp (model NWI-WLAMP3-EX), a high-performance lighting solution designed to meet the needs of professionals in various industries. This cap lamp combines superior illumination with the highest safety standards. Advanced Lighting for Challenging Environments The Wisdom EX Cap Lamp is equipped with a powerful 7.0Ah battery, providing long-lasting and reliable illumination for extensive work periods. Designed to operate efficiently in extreme conditions, it functions perfectly in temperatures ranging from -20°C to 40°C, making it ideal for a wide range of working environments. Compliance with Safety Standards Safety is paramount in professional settings, and the Wisdom EX Cap Lamp meets stringent safety standards. It is certified for Class I, II, and III, Division I, and complies with CSA C22.2 and UL 913 standards. This compliance ensures that the lamp is safe for use in hazardous locations where explosive gases or dust may be present. Durable and Reliable Built to withstand the rigors of industrial use, the Wisdom EX Cap Lamp is a durable and reliable choice for professionals. Its robust construction ensures it can endure the tough conditions often found in mining, construction, and other industrial settings. Ergonomic and User-Friendly Design Weighing in at a comfortable level, the Wisdom EX Cap Lamp is designed for ease of use and comfort, ensuring that it can be worn for extended periods without causing fatigue. Its ergonomic design makes it a practical choice for daily use in demanding work conditions. Versatile for Various Industrial Applications The Wisdom EX Cap Lamp is not only suitable for mining but also for other applications such as construction, oil and gas, and industrial maintenance. Its versatility and dependability make it an essential tool for a wide range of professionals. Get Your Wisdom EX Cap Lamp Today Upgrade your lighting equipment with the Wisdom EX Cap Lamp from Provix. Available now, this cap lamp is your solution for safe, efficient, and reliable lighting in any work environment.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Storm Choke WI Valve 3.97 inch

Water Injection Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Flat deck trailers Leasing

Maximize Your Business Flexibility with Flat Deck Trailer Leasing from CWB National Leasing Enhancing Your Transportation Capabilities with Smart Leasing Solutions For businesses that require versatile transportation solutions, flat deck trailers are invaluable. They offer the flexibility to transport a wide range of goods, from construction materials to heavy equipment. Leasing flat deck trailers through Canadian Western Bank (CWB) National Leasing provides a strategic, adaptable, and financially beneficial option for your business. Here’s how leasing flat deck trailers can support your operational needs: 1. Swift Equipment Access CWB National Leasing recognizes the importance of minimizing downtime in your operations. Their leasing process is designed for speed, with decisions on applications typically made within 48 hours. This efficiency means your flat deck trailers can be delivered and ready for use quickly, ensuring your transportation and logistics operations continue seamlessly. 2. Enhanced Financial Flexibility Leasing flat deck trailers with CWB National Leasing boosts your buying power. Opting for periodic payments instead of a large upfront purchase helps free up cash for other essential business activities. Additionally, the option to add extra features or accessories to your trailers for a small payment increase allows for customization according to your specific business requirements. 3. Effective Cash Flow Management With smaller lease payments over the term, your flat deck trailers begin to contribute to your business’s revenue while still being paid off. This approach helps in maintaining a healthy balance between expenses and income, which is crucial for business growth and stability. 4. Customizable Payment Plans CWB National Leasing offers flexible payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s revenue cycle. This flexibility is particularly advantageous for businesses with fluctuating or seasonal income, ensuring that payments are manageable and suit your financial flow. 5. Potential Tax Advantages Leasing flat deck trailers can offer tax benefits, such as allowing you to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor can help you understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease flat deck trailers through CWB National Leasing is a strategic move that equips your business with essential transportation resources while maintaining financial agility. It ensures access to versatile trailers necessary for a wide range of transportation needs without the financial strain of a large initial investment. This leasing approach enables enhanced operational efficiency, business expansion, and increased profitability in your diverse business ventures.

Service

In Stock

Service

New

ISO


Infrastructure Management

Cybersecurity

ALCiT in Mississauga

Meer informatie

Elevate Your IT Environment with ALCiT's Infrastructure Management Services In the ever-evolving landscape of technology, your IT infrastructure isn't just a backdrop – it's the canvas upon which your business creates, collaborates, and thrives. At ALCiT, we understand the pivotal role that proper infrastructure management plays in achieving cyber resilience and driving productivity. Let us be your partner in optimizing and securing your digital foundation. Optimized and Secured by Default Imagine an IT environment that's not just a support system, but a catalyst for your success. ALCiT's Infrastructure Management services ensure that your assets are optimized and secured by default. Whether it's networks, servers, firewalls, or PCs, we've got you covered with a holistic approach that safeguards your digital infrastructure while you focus on your core business. Leave the Management to the Experts The day-to-day management of IT infrastructure demands expertise and attention to detail. ALCiT steps in as your trusted Managed Service Provider (MSP), relieving you of the intricacies of maintenance. Our trained personnel possess the skills to manage your networks, servers, firewalls, and PCs seamlessly, ensuring everything functions at its best, all while you concentrate on driving your business forward. Typical Services Tailored to Your Needs Resolution at Speed: Technical issues are inevitable, but delays aren't. ALCiT's infrastructure management swiftly resolves issues, minimizing downtime and ensuring your systems stay operational. Patch and Fix Assurance: Staying up to date with patches and fixes is a critical defense against vulnerabilities. We meticulously install patches on all devices, ensuring your infrastructure remains fortified. Disaster Recovery Planning: Preparedness is paramount. We meticulously plan and execute disaster recovery exercises, stress-testing your infrastructure to ensure it's robust and ready for any unforeseen event. Secure Today, Empower Tomorrow Your IT infrastructure should empower your business, not hinder it. ALCiT's Infrastructure Management services go beyond mundane maintenance – they fuel your progress. With us, you can rest assured that your digital assets are in the hands of experts who understand the intricacies of optimizing and securing IT environments. Discover the freedom to focus on your core business as we ensure your IT infrastructure operates seamlessly.

Service

Made to Order

Service

New

ISO


Liquified Natural Gas (LNG) Transport and Supply

LNG Storage Tanks and Regassifiers

Lovat Gas Solutions: Your Dependable Partner for LNG Supply When it comes to LNG supply, Lovat Gas Solutions has a proven track record of delivering, no matter the conditions or location. We understand that your business relies on the uninterrupted availability of natural gas, whether you are an industrial user or a utility. That's why we are here to provide you with peace of mind, allowing you to focus on your core business while we take care of your gas supply needs. Our commitment to excellence means that we go above and beyond to ensure the dependability of our LNG supply. We have a deep understanding of the unique challenges and requirements of different industries, and our experienced team is well-equipped to develop a solution that caters to your organization's specific needs. At Lovat Gas Solutions, we offer flexible options for LNG supply to accommodate your business requirements. Whether you need a short-term supply to cover temporary spikes in demand, a long-term solution to support your ongoing operations, or a reliable backup supply to safeguard against unforeseen disruptions, we have you covered. By partnering with us, you can expect: 1. Reliability: We have a proven track record of delivering LNG supply, regardless of the conditions or location. Our robust infrastructure and logistical expertise ensure that your business receives a consistent and dependable supply of natural gas. 2. Expertise: With years of experience in the industry, our team possesses extensive knowledge and understanding of LNG supply. We stay up-to-date with the latest advancements and industry trends to provide you with the best possible solutions. 3. Customized Solutions: We recognize that each organization has unique needs. Our team will work closely with you to understand your specific requirements and develop a tailored LNG supply solution that aligns with your business goals. 4. Peace of Mind: When you partner with Lovat Gas Solutions, you can have peace of mind knowing that your gas supply needs are in capable hands. Our reliable and responsive service ensures that you can focus on your business without worrying about interruptions in your natural gas supply. Don't let the uncertainties of LNG supply hinder your business operations. Contact Lovat Gas Solutions today, and let us develop a dependable short-term, long-term, or backup supply of natural gas that suits your organization's needs. Trust us to deliver, no matter the conditions or location, so you can keep your business running smoothly and efficiently. Get in touch with us now to explore how we can support your gas supply requirements and help your business thrive.

Service

In Stock

Product & Service

New

API

Land Freight


Safe-T-Whip™ Continuous RD-XLong 30’-9”

RD-XLong

Introducing Safe-T-Whip™ Continuous RD-XLong 30’-9”: Unmatched Safety and Reliability for Extended Restraint Applications At Safe-T-Whip & Restraints Inc., safety is our unwavering commitment. We are proud to present our latest innovation - the Safe-T-Whip™ Continuous RD-XLong 30’-9”. Designed for extended restraint applications, this safety whip offers unparalleled protection and reliability for pressurized pipe fittings in the oilfield. Unmatched Safety Restraint System: The Safe-T-Whip™ Continuous RD-XLong 30’-9” is a safety restraint system specially designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, mitigating dangerous impacts. Engineered for Maximum Protection: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, swivels, and joints. Each section is secured by both the upstream and downstream sections of the flowline, ensuring comprehensive protection in the event of failure. Proper evaluation of the piping system is crucial to ensure adequate anchoring both upstream and downstream, enhancing safety. Certified for Uncompromising Quality: Safety is paramount, and that's why all Safe-T-Whip™ Restraints and Anchors undergo rigorous testing and certification to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatility and Flexibility: The Safe-T-Whip™ Continuous RD-XLong 30’-9” is designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. Its versatility makes it ideal for various flowline configurations, ensuring superior protection for your operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous RD-XLong 30’-9” is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous RD-XLong 30’-9”, you can rest assured that your operations are safeguarded from catastrophic failures. The Ultimate Safety Restraint: SW-RD-XLong 30’-9” Safe-T-Whip™ Continuous is the ultimate safety restraint for extended applications. Trust in the power of Safe-T-Whip™ to safeguard your workforce, equipment, and operations. With Safe-T-Whip & Restraints Inc., safety is never compromised. Invest in Unparalleled Safety: SW-RD-XLong 30’-9” Safe-T-Whip™ Continuous is the pinnacle of safety restraints for extended applications. Secure your Safe-T-Whip™ Continuous RD-XLong 30’-9” today. Keep your operations safe with Safe-T-Whip & Restraints Inc., your trusted partner in safety.

Buy

In Stock

Product & Service

New

API

Air Freight


MIG/Stick 202 Welding machine

Welder

Introducing the MIG/STICK 202: Your Versatile Welding Companion for Oil and Gas Industry When it comes to MIG welding machines that deliver unmatched performance and precision, Canaweld is the name you can trust. Our high-performance MIG welders are designed to tackle the toughest welding jobs in the oil and gas industry, offering a wide range of durable MIG welders, industrial heavy-duty MIG welders, high-tech MIG pulse welders, and portable MIG welders to suit your needs. The Ultimate Welding Solution Canaweld MIG welding machines are not just powerful; they are versatile too. Whether you need to perform Flux-cored or Flux-cored gasless welding or MIG Brazing, our machines have got you covered. Designed for speed, ease of use, and cost savings, our MIG welders are engineered to handle various materials, including mild steel, stainless steel, aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys. Precision and Durability in Every Weld The MIG/STICK 202 is the epitome of portability, power, and versatility in welding. This unit is capable of welding up to 3/8-inch steel in either MIG mode or SMAW setting, providing you with the flexibility to tackle light to medium-duty welding jobs effortlessly. With the ability to run 0.023–0.045-inch MIG wire or up to 3/16-inch SMAW rods with a stable arc, this welding machine delivers exceptional results with every weld. Outstanding Features to Boost Your Productivity At Canaweld, we prioritize your welding experience. That's why the MIG/STICK 202 is equipped with an array of features that set it apart from the rest: • High power output: Enjoy 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, giving you the power you need for demanding welding tasks. • Tested for the toughest conditions: The machine has been rigorously tested in extreme temperatures of 104°F /40°C to ensure optimal performance in any environment. • Inverter power source: The MIG/STICK 202 boasts an inverter power source with optimal welding characteristics in both MIG and Stick modes. • Power fluctuations compensation: The automatic compensation for main power fluctuations within ± 20% ensures a stable and consistent welding process. • Long-distance welding capability: With the ability to use up to 165 feet (50 meters) leads without any power loss at the weld, you can tackle distant welding projects effortlessly. • Precise wire feed: The high-grade metal dual drive roll system ensures precise and constant wire feed, preventing bird nesting and improving efficiency. • Wide welding range: Weld up to 3/8” steel and aluminum with ease, making it suitable for a wide range of applications. • Graduated knob for accuracy: Achieve the most accurate settings with the graduated knob, giving you full control over your welding process. • Stable arc with minimal spatter: The MIG/STICK 202 automatically controls wire speed by voltage feedback, resulting in an extremely stable arc with minimal spatter. • Reliable cooling and protection: Fan-cooled and thermally protected against overheating, this welding machine ensures longevity and durability. • Built-in polarity changeover: Easily switch between common gas and gasless wires with the built-in polarity changeover feature. • User-friendly design: The metal face panel adds durability, while the spool gun compatibility and support for both 8 and 12-inch wire spool sizes enhance convenience. • Comprehensive warranty: Enjoy peace of mind with our comprehensive 3-year warranty, knowing that your investment is protected. Experience Welding Excellence with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld delivers superior performance, precision, and durability. Invest in the MIG/STICK 202 and take your welding capabilities to new heights. With Canaweld's commitment to quality and customer satisfaction, you're choosing a welding companion that will exceed your expectations. Unlock your welding potential with Canaweld. Experience the future of welding technology and achieve exceptional results with the MIG/STICK 202.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Composite Bridge Plug

CBP CT Bridge Plug

Introducing the CBP Composite Bridge Plug from Marlin Oil Tools: The Cutting-Edge Solution for Temporary Well Barrier Operations Marlin Oil Tools is proud to present the CBP Composite Bridge Plug, a state-of-the-art downhole tool designed for optimal performance in oil and gas well operations. Engineered for easy installation using a hydraulic Setting Tool (STT), the CBP Composite Bridge Plug provides an effective temporary barrier within the well, isolating underlying intervals for enhanced operational control and safety. Key Features of the CBP Composite Bridge Plug: Efficient Installation: Utilizes a hydraulic Setting Tool (STT) for quick and secure deployment in oil and gas wells. Reliable Well Isolation: Designed to create a temporary barrier, effectively cutting off underlying intervals to manage wellbore integrity. Easy Removal Process: The composite bridge plug can be easily milled away using standard milling BHA, facilitating straightforward removal. Durable and Reliable Construction: Features collets with an easily drilled design, made from high-quality composite materials and reinforced with ceramic cylinders for increased durability. Proven Field Performance: The reliability and effectiveness of the CBP Composite Bridge Plug have been validated through extensive field work, ensuring dependable well isolation. Maximize your well intervention and maintenance operations with the CBP Composite Bridge Plug from Marlin Oil Tools, a premier solution for establishing temporary barriers in oil and gas wells. Engineered with advanced composite materials and ceramic cylinders, the CBP offers unmatched reliability and ease of installation using a hydraulic Setting Tool (STT). Whether you need to isolate wellbore intervals or ensure operational safety, the CBP Composite Bridge Plug's field-proven technology and easy milling process make it an indispensable tool for modern well operations. Choose the CBP for efficient, reliable, and easy-to-remove wellbore isolation. Why Choose the CBP Composite Bridge Plug from Marlin Oil Tools? Superior Wellbore Isolation: Offers effective temporary isolation, improving operational safety and control. Streamlined Installation and Removal: Designed for ease of installation and removal, reducing downtime and operational costs. Advanced Material Construction: Utilizes composite materials and ceramic cylinders for enhanced durability and reliability. Field-Tested Technology: Backed by extensive field testing, ensuring proven performance in various well conditions. The CBP Composite Bridge Plug by Marlin Oil Tools represents the forefront of downhole tool innovation, providing oil and gas operators with a reliable, efficient solution for temporary wellbore isolation. Incorporate the CBP into your operations to benefit from its superior performance and ease of use.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Coiled Tubing Motorhead Assembly

MHA Motorhead Assembly

Introducing the MHA Motorhead Assembly from Marlin Oil Tools: A Comprehensive Downhole Solution for Coiled Tubing Operations in the Oil and Gas Industry Marlin Oil Tools is proud to present the MHA Motorhead Assembly, an innovative downhole tool designed to enhance the efficiency and safety of coiled tubing operations within the oil and gas sector. As a versatile component of the Bottom Hole Assembly (BHA), the MHA Motorhead Assembly is engineered to operate seamlessly with or without a motor, offering flexibility for a wide range of well intervention tasks. Featuring key components like the Back Pressure Valve (BPV), Hydraulic Disconnect (HDI), and Dual Circulation Sub (DCS), the MHA is your all-in-one solution for optimized downhole performance. Key Features of the MHA Motorhead Assembly: Versatile Use: Whether installed above a motor or run independently, the MHA provides critical functionality for well intervention operations. Comprehensive Assembly: Includes essential parts such as the BPV for well pressure control, the HDI for secure and efficient tool separation, and the DCS for enhanced fluid management. Enhanced Operational Safety: The inclusion of a Back Pressure Valve ensures controlled pressure conditions, minimizing the risk of blowouts or other well control issues. Reliable Disconnect Capability: The Hydraulic Disconnect allows for a swift and safe disengagement from the lower BHA components under challenging conditions, enhancing operational safety and flexibility. Improved Fluid Circulation: The Dual Circulation Sub enables operators to manage downhole fluid dynamics effectively, optimizing well cleaning and treatment processes. Elevate your coiled tubing operations with the MHA Motorhead Assembly from Marlin Oil Tools, a leading-edge downhole solution tailored for the oil and gas industry. Designed for versatility and efficiency, the MHA integrates critical components like the BPV, HDI, and DCS into a single assembly, streamlining your BHA configuration for various well intervention scenarios. Whether conducting well cleanouts, stimulations, or other interventions, the MHA Motorhead Assembly offers the reliability, safety, and performance necessary to achieve operational success. Opt for the MHA from Marlin Oil Tools for a comprehensive approach to downhole challenges. Why Choose the MHA Motorhead Assembly from Marlin Oil Tools? Operational Versatility: Adapts to different well intervention needs with or without a motor, ensuring broad application scope. Integrated Safety Features: Combines pressure control, secure disconnection, and fluid management into one assembly for enhanced safety. Streamlined BHA Integration: Simplifies the BHA setup, reducing the need for multiple tools and ensuring compatibility across operations. Enhanced Efficiency and Safety: Delivers improved operational outcomes with built-in safety mechanisms, minimizing risks and enhancing performance. The MHA Motorhead Assembly by Marlin Oil Tools represents the forefront of innovation in coiled tubing tool technology, providing operators with a versatile, safe, and efficient solution for maximizing well intervention results. Incorporate the MHA into your coiled tubing operations to ensure superior downhole performance and operational success.

Buy

Made to Order

Manufacturer

New

API

Land Freight


High Density Fibre cable splicing

Enabling Seamless Connectivity through High-Density Fiber Cable Splicing at Nulux Network Solutions In the interconnected world of the oil and gas industry, where vast swaths of data traverse through networks, orchestrating the symphony of myriad operations, Nulux Network Solutions establishes itself as the maestro, ensuring every note, i.e., data byte, flows seamlessly, securely, and efficiently. The Core of Energy Sector: Data Transmission Navigating through the contemporary oil and gas sector necessitates not just the flow of energy, but the incessant, uninterrupted, and secure transmission of data. Nulux, proffering state-of-the-art products, solutions, and services across the comprehensive energy value chain, takes the lead in facilitating this vital data flow. Our commitment extends beyond providing robust solutions - we forge a pathway toward a more sustainable future, infusing every facet of your operations with technology that ensures your data travels not only with speed but also with uncompromised security. Nulux’s High-Density Fiber Cable Splicing: Where Technology Meets Excellence Fiber optic communication stands out as a linchpin in the modern digital world, especially within the realms of the oil and gas sector. Amidst the vast landscapes, both onshore and offshore, where operations unfold, ensuring that data connects every operational node is pivotal. Here, our High-Density Fiber Cable Splicing service comes to the forefront as a beacon of technological excellence and operational efficacy. Enhanced Connectivity: Our high-density fiber cable splicing ensures that your operations are interlinked with a network that offers enhanced, unfaltering connectivity, even in the most challenging terrains and under stringent conditions. Bandwidth Prowess: Harness the power of expanded bandwidth, facilitating the swift flow of large volumes of data across your operational network, ensuring every decision is backed by real-time data. Robust and Reliable: With a focus on durability and reliability, our fiber cable splicing ensures your network withstands the challenges, providing a robust platform for data transmission. Crafting Futures with Sustainable Data Management In the sprawling domains of the energy sector, where sustainability is progressively becoming a cardinal focus, enabling operations that are not only efficient but also eco-conscious is paramount. Our High-Density Fiber Cable Splicing embodies this principle, ensuring your data management is not only optimal but also leans toward sustainability. Navigating Through the Digital Terrain Together At Nulux, we do not merely offer a service; we extend a partnership. A partnership wherein your aspirations for operational efficiency, data security, and sustainable practices are realized through our technological solutions. Our High-Density Fiber Cable Splicing is more than a service – it is a commitment to ensuring your data flows through a network that is as steadfast, secure, and efficient as the operations it facilitates. Conclusion In a world where data permeates every operational stratum, ensuring it flows through a network that epitomizes reliability, security, and efficiency is crucial. Navigate the intricate digital landscapes of the oil and gas industry with Nulux, where your data is transmitted through networks forged from technological excellence and a commitment to sustainability. Join hands with Nulux Network Solutions, and let’s traverse through the digital journey towards a sustainable, data-driven future together. Because at Nulux, your data is not merely transmitted; it is cared for, safeguarded, and facilitated through a network where every byte is crucial in crafting a sustainable future. Let's illuminate the path towards a robust, interconnected, and sustainable operational future, together.

Service

In Stock

Service

New

ISO


Blind Box for Wireline

Downhole Tools

Unlocking Efficiency with HOCA Oil Tools B.V.'s Advanced Slickline Blind Boxes In the complex world of oilfield services, particularly within the realm of slickline operations, the versatility and precision of downhole tools are of paramount importance. At HOCA Oil Tools B.V., we take pride in our comprehensive range of slickline blind boxes, designed to enhance operational efficiency and safety in the oil and gas industry. Our Type ‘A’ Blind Box series demonstrates our commitment to innovation and quality, catering to a wide range of operational needs. Main Features of HOCA's Slickline Blind Boxes: Diverse Size Range: Available in nominal sizes from .375 inches to 6.687 inches, catering to a broad spectrum of wellbore sizes and wireline operations. High-Quality Materials: Manufactured using robust materials, our blind boxes are designed to withstand the rigors of downhole environments, ensuring reliable performance. Precision Engineering: The precision in crafting each blind box, from threading to length specifications, ensures optimal performance and compatibility with existing slickline tool strings. Customization: Besides standard sizes, we offer custom orders to meet unique operational needs, ensuring that all aspects of the blind box, from thread type to length, are tailored to client specifications. Operational Efficiency: Designed for easy integration and use, our blind boxes help streamline slickline operations, reducing downtime and enhancing overall efficiency. Technical Support: HOCA Oil Tools B.V. provides comprehensive technical support, ensuring that our clients have the guidance needed to select and utilize the most appropriate blind boxes for their operations. At HOCA Oil Tools B.V., we understand the critical nature of slickline operations in the oil and gas industry. Our slickline blind boxes are a testament to our commitment to quality, innovation, and customer service. Choose HOCA for your downhole tool needs and experience the difference that professional-grade tools, backed by industry-leading support and expertise, can make in your operations

Buy

In Stock

Product & Service

New

API

Air Freight


Coiled Tubing Cement Mill

CEM, Cement Mill

Introducing the CEM Cement Mill from Marlin Oil Tools: The Premier Solution for Efficient Wellbore Milling Operations Marlin Oil Tools proudly presents the CEM Cement Mill, a state-of-the-art milling tool designed to optimize cement mill-out operations and tackle various downhole obstacles in oil and gas wells. Engineered for versatility and efficiency, the CEM Cement Mill is capable of grinding and washing out any object within the well that is softer than the mill's cutters, ranging from intentionally placed equipment like bridge plugs to inadvertently lost tools. Key Features of the CEM Cement Mill: Optimized for Cement Removal: Specifically designed to excel in cement mill-out operations, ensuring a clean and clear wellbore for subsequent interventions. Broad Milling Applications: Capable of milling a wide array of downhole obstacles, providing flexibility across well intervention tasks. Effective Debris Management: Equipped with multiple flushing holes, the CEM Cement Mill facilitates the circulation of drilling fluid, which efficiently removes milled particles and cools the cutting edge. Superior Cutting Technology: Features durable carbide inserts welded inside the mill body, offering exceptional grinding performance and longevity. Cooling and Lubrication: The circulation of drilling fluid not only removes debris but also prevents overheating, extending the life of the carbide inserts. Redress Services: Marlin Oil Tools offers comprehensive redress services for worn carbide inserts, ensuring your CEM Cement Mill remains at peak performance. Elevate your well intervention and milling operations with the CEM Cement Mill from Marlin Oil Tools, a leading-edge solution designed for unparalleled efficiency in cement mill-out and obstacle removal in the oil and gas industry. With its advanced design, the CEM Cement Mill tackles downhole challenges with ease, ensuring operational success. Whether you're dealing with cement, bridge plugs, or lost equipment, the CEM Cement Mill's carbide inserts and flushing holes ensure effective milling and debris removal, enhancing wellbore integrity and facilitating subsequent operations. Opt for Marlin Oil Tools' CEM Cement Mill for your milling needs and experience the difference in precision, efficiency, and durability. Why Choose the CEM Cement Mill from Marlin Oil Tools? Versatile Milling Solution: Offers a versatile tool for a wide range of downhole milling challenges. Enhanced Operational Efficiency: Designed to maximize milling efficiency and minimize downtime. Durable and Reliable: Built with high-quality materials and carbide inserts for prolonged service life. Comprehensive Support: Backed by Marlin Oil Tools' expert redress services, ensuring your tool is always in optimal condition. The CEM Cement Mill by Marlin Oil Tools represents the forefront of downhole milling technology, providing oil and gas operators with a reliable, efficient, and versatile tool for enhancing well intervention outcomes. Incorporate the CEM Cement Mill into your operations for smoother, more effective wellbore preparation and obstacle management.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Manage Risks

Software Development

Eleks in Toronto

Meer informatie

ELEKS: Empowering Risk Management for a Secure Energy Future Navigate the complexities of the energy and utility sector with confidence, backed by ELEKS' custom software engineering expertise. Our specialized team can guide you in developing and implementing cutting-edge software solutions for power network monitoring and analysis, enabling you to effectively manage risks, address weaknesses, and predict potential challenges. Elevate Your Risk Management with ELEKS Energy Software Development: Embrace the power of advanced energy management software solutions that redefine the productivity, accessibility, safety, and sustainability of your business power system. Comprehensive Risk Assessment: With our software solutions, identify your power system's weak points swiftly and accurately. Effectively address network issues and predict potential risks, enabling you to take timely preventive measures. Custom Solutions Tailored to You: Collaborate with ELEKS to develop custom energy management software solutions designed to cater precisely to your risk management needs. Gain insights that empower you to make informed decisions. Why Choose ELEKS? Industry Expertise: ELEKS boasts a team of specialists with comprehensive experience in custom software engineering for the energy and utility sector. Trust us to understand and address your unique challenges. Predictive Insights: Stay ahead of potential risks with predictive analysis powered by our software solutions. Leverage insights to take preventive measures and ensure the stability of your power network. Cutting-Edge Technologies: Our solutions harness the latest technologies, including Cloud, IoT, blockchain, and more. Future-proof your risk management strategies with innovation at your fingertips. Empower a Secure Energy Future: In a dynamic industry where risks abound, ELEKS empowers you to manage uncertainties effectively. Secure your energy future with a proactive approach to risk assessment and mitigation. Join the Energy Resilience Revolution with ELEKS Embrace a future where risks are managed proactively and uncertainties are addressed with precision. ELEKS' energy software development solutions equip you with the tools needed to navigate the energy and utility sector confidently. It's time to lead the way towards a secure energy future – choose ELEKS as your partner in risk management and innovation.

Service

Made to Order

Product

New

ISO


BSD-40

Barium Scale Dissolver

Introducing Enviro-Syn® BSD-40™: The Solution to Your NORM Scale Dissolving and Descaling Needs Cleanstream is excited to present our high-performance NORM scale dissolver and descaler, Enviro-Syn® BSD-40™. Our product is specially designed to efficiently remove sulfate scale, with a unique ability to dissolve extremely high amounts of barium sulfate scales. We understand the challenges that come with BaSO4 scale formation, such as reduced production, bacterial growth, fouling of piping, tanks, and process equipment. These issues can greatly reduce the profitability of your operations. That's why we have created Enviro-Syn® BSD-40™, a product that can effectively remove these scales and help improve your operations' profitability. Our product is highly versatile and can be used in a variety of applications, including down-hole scaling issues, production well near wellbore damage from barite-based mud systems, heat exchangers/pipelines, on-shore/off-shore topside processing and production treatments, industrial boiler systems, geothermal well scale treatments, separators/hydrocyclones/degasser treatments, and injection well treatments. One of the significant advantages of Enviro-Syn® BSD-40™ is that it is not corrosive to metal or typical oilfield elastomers and seals. This means that you can use our product without the risk of damaging your equipment. At Cleanstream, we are committed to providing high-quality products that are safe for the environment and the people who use them. Our product is designed to meet the highest industry standards while providing exceptional performance. So why wait? Make the switch to Enviro-Syn® BSD-40™ today and experience the benefits of a highly effective NORM scale dissolver and descaler that is safe for your equipment and the environment. Contact us to learn more about how you can get started with Enviro-Syn® BSD-40™ and start improving your operations' profitability.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


Currency Management of Foreign Investments

Foreign Exchange For Investment Property

Unlock Financial Freedom with Dunbridge Financial's Personal Services Are you tired of hidden fees and complicated financial services that leave you feeling overwhelmed and uncertain about your money? Look no further! Dunbridge Financial is here to revolutionize the way you manage your personal finances. With our commitment to live rates, uncompromising security, and ease of use, we are your gateway to financial freedom. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in complete transparency. What you see is what you get - no hidden fees, no surprises. Access our live exchange rates and take control of your money like never before. With us, you can rest assured that you're getting the most value out of every transaction. Security Is Our Priority Your financial well-being is of utmost importance to us. With Dunbridge Financial, your funds and data are in safe hands. We partner with payment service providers compliant with ISO27001, ensuring that your client funds are managed securely and with the utmost care. Enjoy peace of mind knowing that your financial interests are protected. Easy to Use, Easy to Save We believe that managing your money should be a breeze. That's why our personal financial service is designed with simplicity in mind. Sending money to over 100 countries is quick and effortless. Just choose your destination, lock in your rate, and you're done - it's as easy as that. Foreign Investment Management - Your Gateway to Global Opportunities At Dunbridge Financial, we go beyond simple money transfers. We offer a wide range of foreign investment management options, catering to your diverse financial needs. Here's how we can help you unlock global opportunities: 1. Manage Investments from Abroad: Handle your investments in your home country, even when you're residing abroad. Our platform empowers you to stay connected and make informed investment decisions regardless of your location. 2. Explore Offshore Investments: Diversify your investment portfolio with offshore opportunities. Our secure and compliant processes ensure that your international currencies are managed efficiently and effectively. 3. Pay Your Mortgage Abroad: Dreaming of a vacation villa or an investment property in another country? Dunbridge Financial makes it hassle-free to pay your mortgage in a different currency, turning your aspirations into reality. 4. Flexible Payment Options: Enjoy the flexibility of having your pay and expenses paid in your preferred currency. No more worries about currency fluctuations affecting your financial plans. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider. We are your trusted partner, dedicated to simplifying your financial journey and maximizing your opportunities. With us, you'll experience: • Cutting-edge technology for seamless financial transactions • Personalized support from our expert team, ensuring your needs are met • Secure and compliant processes for your peace of mind Join Us Today and Embrace Financial Freedom Discover the power of transparent, secure, and efficient financial services with Dunbridge Financial. Take control of your personal finances, explore global investment opportunities, and embrace a world of possibilities. Whether you're managing investments from abroad or making international money transfers, we are your reliable partner every step of the way. Unlock your financial freedom with Dunbridge Financial. Sign up today and experience a new era of financial empowerment.

Service

Made to Order

Service

New

ISO

Air Freight


Oil Only Absorbent Spill Kit - 41 Gallon

Oil Spill Kit – 41 Gallon Drum

OilHungry in Stoney Creek

Meer informatie

The Oil Only Absorbent Spill Kit - 41-Gallon contains, The 41-Gallon Oil Only Absorbent Spill Kit is a comprehensive solution for managing medium-sized spills in marine environments, refineries, and loading docks. Designed for versatility and effectiveness, the kit includes, 50 Absorbent Pads (8” x 11.5”) Versatile pads for quick and efficient absorption of oil-based liquids, ideal for various spill scenarios. 4 Sorbent Socks (3” x 4Ft) Specially designed to contain and absorb spills, particularly in confined or challenging areas. 8 Pillows (18” x 18”) Large pillows for absorbing and retaining significant quantities of oil, enhancing spill response efficiency. 1 Pair of Nitrile Gloves Essential personal protective equipment for safe handling during spill cleanup. 5 Disposal Bags Ensures proper containment and disposal of used absorbent materials, contributing to responsible waste management. 1 Gallon Drum (55) A larger containment option for collecting and managing absorbed liquids. Part Number: OH-OOS-41G The kit is specifically tailored for medium spills in marine environments, refineries, and loading docks, offering a comprehensive and efficient response to oil-based spills. Polypropylene is a preferred material for oil-based cleanup for several reasons, making it an ideal choice for products like the Oil-Only Absorbent Pillow. Hydrophobic Nature Polypropylene is inherently hydrophobic, meaning it repels water. This characteristic is crucial in oil-based cleanup where the goal is to selectively absorb oils while avoiding the absorption of water. The hydrophobic nature of polypropylene ensures that the material remains focused on its primary task—absorbing oil-based liquids. High Affinity for Oil Polypropylene has a high affinity for oil-based substances. When in contact with oils, polypropylene quickly absorbs and retains these liquids. This property enhances the efficiency of cleanup operations, allowing for the rapid containment and absorption of oil spills. Recyclability Polypropylene is recyclable, adding an environmentally conscious aspect to its use in oil-based cleanup products. Inert Nature Polypropylene is inert, meaning it does not react with or alter the composition of the substances it meets. This inert nature is crucial in cleanup situations where the goal is containment and absorption without introducing additional complications or reactions.

Buy

In Stock

Manufacturer

New

ASME

Air Freight


CSA 12 unit, non-Locking FAST charger rack

Miner's Cap Lamp Charging Station

Provix in New Lowell

Meer informatie

Optimize Your Charging Process with the CSA 12 Unit Non-Locking FAST Charger Rack from Provix Provix is pleased to offer the CSA 12 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-12BC), a streamlined and efficient charging solution ideal for modern mining, construction, and industrial environments. This charger rack is designed to rapidly charge up to 12 units, making it perfect for smaller teams or spaces. Rapid Charging for Minimal Downtime The CSA 12 Unit FAST Charger Rack is engineered for speed and efficiency, charging WISE LITE2 units in just 4 hours and LAMP3A/4A models in 5 hours. This quick charging capability is crucial for operations where equipment needs to be ready and operational with minimal delay, ensuring continuous productivity. Compact and Space-Saving Design With its non-locking, single-sided design, the CSA charger rack is an ideal solution for operations with limited space. Its compact footprint allows for convenient placement in equipment rooms, workshops, or mobile units, maximizing the utility of available space without sacrificing charging capacity. Versatile and User-Friendly The CSA 12 Unit Charger Rack is not just efficient and space-saving; it’s also incredibly user-friendly. Its straightforward design allows for easy access to all charging ports, facilitating the efficient management of multiple devices. This accessibility is especially beneficial in fast-paced work environments where time is of the essence. Durable and Reliable Construction Constructed to withstand the tough conditions typical in mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures long-term performance, representing a sound investment for operations focused on efficiency and reliability. Ideal for Various Operational Sizes Whether you are part of a smaller mining crew, a construction team, or managing a rental fleet, the CSA 12 Unit Non-Locking FAST Charger Rack is an excellent choice. It allows for effective management of multiple devices, making it versatile for different operational needs. Get Your Charger Rack Today Upgrade your equipment charging station with the Wisdom CSA 12 Unit Non-Locking FAST Charger Rack from Provix. Visit www.provix.net now to learn more about this efficient, space-saving charging solution and take a step towards optimizing your operation’s productivity.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


X-SPAN Tubing/Casing Patch System

Casing Patch

Introducing the X-SPAN Tubing/Casing Patch System from ID OILTOOLS! This proven, durable and dependable system is the solution you've been looking for to seal perforations, holes, splits, corrosion or leaks of any kind in all types of tubulars. The X-SPAN system is incredibly versatile and can be deployed using a myriad of methods in virtually any type of well bore. It's the economical and reliable solution for a wide range of applications, including shutting off unwanted water or gas influx, zonal protection for frac-through applications, repairing tubular leaks from pin holes to collar leaks, repairing corroded or eroded tubing or casing, as well as isolating frac ports and auxiliary tools in horizontal wells. With its large bore, the X-SPAN system allows for easy passage of service tools including bridge plugs, drop balls, seal bore assemblies, logging tools and perforating systems. Plus, its minimal surface equipment required for deploying the patch and rigless intervention results in significant savings for the operator. The metal-to-metal X-SPAN seal is proven technology engineered for high temperature applications while yielding the highest burst and collapse pressure ratings in the industry. The X-SPAN Tubing Casing Patch can be deployed to protect up to 300ft (91m) sections of tubing or casing on a single trip. Multi-trip stackable systems are available to span intervals longer than 300ft (91m). At ID OILTOOLS, we understand that extreme well bore environments require premium alloys. That's why we offer custom sized X-SPAN systems designed using premium alloys to meet your specific needs. Choose the X-SPAN Tubing/Casing Patch System from ID OILTOOLS for proven, reliable and versatile tubular repair solutions. Contact us today to learn more!

Buy

In Stock

Product & Service

New

API

Sea Freight


Drive Down Bailers

InWaTec Combined: Streamlining Wellbore Maintenance with Drive Down Bailer Services In the intricate world of well servicing, the importance of maintaining a clear and clean wellbore cannot be overstated. At InWaTec Combined, we understand the complexities of bailing operations, whether they are conducted on drilling rigs, during workover operations, or within production wells. That's why we are proud to offer our specialized Drive Down Bailer running services, providing a robust solution for the collection of solids and the overall cleansing of the wellbore environment, both onshore and offshore. Defining Bailing Operations with Excellence Bailing operations are essential for the upkeep of wellbore integrity, allowing for the efficient removal of debris that could potentially hinder well performance. InWaTec Combined's Drive Down Bailer services are meticulously designed to handle these operations with precision and reliability, ensuring that your wellbore remains free from obstructions that could impede operational success. Adaptable Services for Diverse Settings Our Drive Down Bailer services are versatile and adaptable, capable of being deployed in a variety of settings. Whether it’s the challenging offshore environment with its unique logistical demands or the accessibility of onshore operations, our services are tailored to meet the needs of the specific operation, ensuring the same high standards of quality and efficiency are maintained across all environments. Innovative Approach to Wellbore Cleaning InWaTec Combined utilizes the latest in bailing technology, equipping our Drive Down Bailers with the capacity to effectively collect and remove solids from the wellbore. Our approach to wellbore cleaning prioritizes not only the immediate removal of debris but also the long-term maintenance of the wellbore, ensuring continued productivity and reduced risk of downtime. Safety and Environmental Responsibility Recognizing the importance of safety and environmental stewardship, InWaTec Combined conducts all bailing operations with these as core priorities. Our Drive Down Bailer services are executed with the utmost attention to safety protocols, ensuring the well-being of all personnel involved, while also maintaining the integrity of the surrounding environment. InWaTec Combined: Your Trusted Partner in Well Servicing By choosing InWaTec Combined for your bailing needs, you are selecting a partner committed to delivering excellence. Our Drive Down Bailer running services are a reflection of our dedication to providing top-tier well servicing solutions that not only meet but exceed industry standards. We are dedicated to ensuring that your operations are carried out efficiently, safely, and with the highest degree of professionalism. Conclusion: Clearing the Path to Operational Excellence In conclusion, InWaTec Combined's Drive Down Bailer services offer a strategic advantage in well servicing operations. Our commitment to precision, adaptability, and safety ensures that we provide solutions that clear the path to operational excellence. Trust in the expertise and dedication of InWaTec Combined to keep your wellbore in optimal condition, ensuring the continued success and productivity of your well operations.

Service

In Stock

Service

New

API

Land Freight


CSA 60 unit, non-Locking, FAST charger rack

Miner's Cap Lamp Charging Station

Provix in New Lowell

Meer informatie

Boost Your Equipment’s Readiness with the CSA 60 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to introduce the CSA 60 Unit Non-Locking FAST Charger Rack (model NWI-NWCR-60BC-SSI), a high-capacity, single-sided charging solution designed for the fast-paced needs of modern mining and industrial operations. This charger rack is engineered to keep your Wisdom lighting equipment fully charged and ready for any task. Rapid Charging for Maximum Efficiency The CSA charger rack is optimized for the WISE LITE2, LAMP3A, and 4A models, offering an impressive charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This quick turnaround is essential for minimizing downtime and ensuring your team's equipment is always operational. High-Capacity Charging Solution With the ability to charge up to 60 units simultaneously, this charger rack is perfect for large-scale operations. Its single-sided design is space-efficient, making it an ideal fit for equipment rooms, charging stations, or any workspace where space is at a premium. Designed for Convenience and Accessibility The non-locking feature of the CSA 60 Unit Charger Rack provides easy and quick access to all charging ports, facilitating efficient management of multiple devices. This accessibility is particularly beneficial in fast-paced work environments where time is critical. Durable and Reliable Construction Built to withstand the demanding conditions of mining and industrial environments, the CSA charger rack is both durable and reliable. Its sturdy construction ensures long-lasting performance, making it a valuable investment for any operation. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and rental equipment providers who need to charge a large number of devices efficiently and reliably. Its high capacity and fast charging capabilities make it an indispensable tool for large teams. Elevate Your Charging Capabilities Today The Wisdom CSA 60 Unit Non-Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to discover more about this efficient and practical charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Cameras Leasing

Enhance Your Visual Capabilities with Camera Equipment Leasing from CWB National Leasing Capturing Success with Advanced and Flexible Photographic Solutions For businesses in the fields of photography, filmmaking, marketing, or any industry requiring high-quality visual content, state-of-the-art camera equipment is essential. Leasing camera equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and intelligent solution for businesses seeking to elevate their visual production quality. Here’s how leasing camera equipment can benefit your business: 1. Rapid Access to Professional Camera Gear Understanding the dynamic nature of visual content creation, CWB National Leasing offers a swift leasing process. Decisions are typically made within 48 hours of application, ensuring that your camera equipment can be delivered and operational quickly. This prompt service allows you to stay ahead in the fast-paced world of digital content. 2. Increased Financial Flexibility Leasing camera equipment with CWB National Leasing enhances your financial power. It allows you to spread costs over manageable periodic payments instead of a substantial initial purchase, freeing up capital for other essential business operations. The option to add extra features or accessories to your camera equipment for a small payment increase enables customization to meet specific project needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your camera equipment starts contributing to your business’s productivity while still being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is especially beneficial for businesses with variable or seasonal projects, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing camera equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Choosing to lease camera equipment through CWB National Leasing is a strategic decision that provides your business with the latest in photographic technology while maintaining financial agility. It ensures access to top-tier camera gear, vital for producing high-quality visual content, without the financial burden of a large upfront investment. This leasing approach enables enhanced creative capabilities, improved content quality, and increased competitiveness in the visual media market.

Service

In Stock

Service

New

ISO


NWB-30 Charger

High Efficiency Miner's Cap Lamp Portable Charger

Provix in New Lowell

Meer informatie

Experience Rapid and Efficient Charging with the Wisdom NWB-30 Charger – Now Available at Provix Provix is proud to introduce the Wisdom NWB-30 Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This state-of-the-art charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Versatile Charging Options The NWB-30 Charger offers both AC and DC charging capabilities, providing flexibility in various environments. It supports AC input of AC 100-240 V ± 10%, 0.2 A, 50-60 Hz, and DC input of 7-30 V, 1.6 A. This versatility ensures that you can charge your equipment anywhere, whether on-site or in the office. Optimized for Wisdom Lamp3A This charger is specially designed for the Wisdom Lamp3A, offering a fast charging time of approximately 5 hours. Its compatibility with this lamp model ensures that your lighting equipment is quickly ready for use, reducing downtime and enhancing productivity. High-Efficiency Charging With a maximum DC output voltage of 4.80 V ± 0.05 V and a DC output current of 2000 mA ± 100 mA, the NWB-30 Charger delivers efficient and rapid charging. This ensures your equipment is charged in the shortest possible time, keeping you ready for any task. Compact and Lightweight Design Measuring 114 x 79 x 35 mm (4.5 x 3.1 x 1.4 in) and weighing only 170 g (6.00 oz), the NWB-30 is compact and portable. Its lightweight design makes it easy to carry and store, ideal for professionals on the move. Reliable and Durable Built to withstand the rigors of mining environments, the NWB-30 Charger is both reliable and durable. Its robust construction ensures long-term performance, making it a valuable investment for any mining professional. Enhance Your Charging Experience The Wisdom NWB-30 Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit our website at www.provix.net. Stay powered and productive with the Wisdom NWB-30.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


KWIK Control Line and Cable Protector

Cross Coupling Protectors

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Buy

In Stock

Manufacturer

New

API

Air Freight


Tuition Payments for Studying Abroad

Personal Financial FX Service

Simplify Your Personal Finances with Dunbridge Financial Are you a parent with kids studying in a different country, or do you need to transfer money to an international account quickly and securely? Look no further than Dunbridge Financial! We are your trusted partner for all your personal financial needs, offering a wide range of services to make your life easier. Our Personal Services cater to various requirements, from tuition payments for international education to seamless money transfers worldwide. Tuition Payments Made Easy Sending tuition payments for your children studying abroad should be a seamless experience. With Dunbridge Financial, you can bid farewell to complicated processes and uncertainty. We streamline the tuition payment process, making it quick and hassle-free. Rest assured, your funds will reach the intended destination promptly, so your kids can focus on their education while you enjoy peace of mind. Swift and Secure International Transfers Whether it's supporting family members overseas, investing in international opportunities, or managing your global finances, transferring money abroad should never be a source of stress. At Dunbridge Financial, we understand the importance of secure and efficient transactions. Our platform offers quick and secure transfers to over 100 countries, giving you the power to choose where and who receives your money. Why Choose Dunbridge Financial? 1. Live Rates with No Hidden Fees Transparency is at the core of our values. With Dunbridge Financial, you'll never encounter hidden fees or unpleasant surprises. What you see is what you get - access our live exchange rates and maximize the value of your money. 2. Security First Your financial security is our top priority. We partner with payment service providers compliant with ISO27001, ensuring that your funds and data are handled safely and securely. Rest assured, your personal information remains protected. 3. Effortless Money Transfers Sending money globally shouldn't be a complicated process. Our user-friendly platform allows you to send funds to your desired location with ease. Choose your destination, lock in your rate, and you're all set - it's that simple! Experience the Dunbridge Difference Today At Dunbridge Financial, we are more than just a financial service provider. We are your partner in building a secure and prosperous future. Our commitment to excellence and customer satisfaction sets us apart from the rest. Join Dunbridge Financial and Embrace Financial Freedom Unlock the potential of hassle-free tuition payments and secure international money transfers with Dunbridge Financial. With our personalized support, competitive rates, and robust security measures, you can trust us to handle your personal finances with care. Sign Up Today Experience the convenience of our Personal Services firsthand. Join Dunbridge Financial today and embark on a journey of financial ease and empowerment. No matter the destination, we'll help you get there quickly and securely. Say goodbye to financial complexities and hello to a brighter future with Dunbridge Financial.

Service

Made to Order

Service

New

ISO

Air Freight


Dozers Leasing

Boost Your Construction Capabilities with Dozer Leasing from CWB National Leasing Empower Your Construction Projects with Flexible Equipment Solutions For any construction business, having the right equipment like dozers is essential for efficiency and success. Leasing your dozer through Canadian Western Bank (CWB) National Leasing provides a strategic and financially savvy solution that aligns perfectly with the needs of your construction projects. Here's why leasing a dozer through CWB National Leasing is a smart move for your business: 1. Rapid Equipment Acquisition CWB National Leasing understands the importance of time in the construction industry. They offer a streamlined leasing process, often approving applications within 48 hours. This means you can expect your dozer to be delivered and ready for use shortly after approval, reducing downtime and keeping your projects on schedule. 2. Enhanced Buying Power Leasing a dozer with CWB National Leasing boosts your purchasing capacity. It allows for periodic payments instead of a hefty initial investment, freeing up capital for other aspects of your business. Additionally, you can customize your dozer with extra features or accessories for a minimal increase in your payment, enhancing its functionality and efficiency. 3. Effective Cash Flow Management With manageable lease payments spread over the lease term, your dozer starts to contribute to your revenue even as you pay for it. This balanced approach helps maintain a healthy expense-to-revenue ratio, crucial for the financial health of your business. 4. Flexible Payment Structures CWB National Leasing offers payment plans that can be tailored to your business’s revenue cycle, including seasonal, semi-annual, or annual options. This flexibility is especially beneficial for construction businesses, where income can vary based on project timelines and seasons. 5. Potential Tax Advantages Leasing may provide tax benefits, as it allows you to expense lease payments instead of depreciating the capital cost of the dozer. Consulting with a tax advisor can help you understand how leasing can optimize your business’s tax situation. Conclusion Choosing to lease your dozer through CWB National Leasing is a strategic decision that enables your construction business to utilize essential equipment while maintaining financial flexibility. It ensures that you have the necessary tools for your projects without the burden of a large upfront investment, paving the way for growth, efficiency, and profitability in the competitive construction sector.

Service

In Stock

Service

New

ISO


Tapered Mill

TPM Tapered Mill

Introducing the TPM Tapered Mill from Marlin Oil Tools: The Essential Downhole Tool for Precision Well Intervention Marlin Oil Tools is proud to offer the TPM Tapered Mill, a specialized downhole tool crafted for superior performance in well intervention tasks. Designed to navigate and resolve wellbore challenges efficiently, the TPM Tapered Mill excels in grinding and washing out objects that are softer than the mill's cutters, from intentionally placed equipment like bridge plugs to unexpectedly lost tools. Key Features of the TPM Tapered Mill: Versatile Milling Capabilities: Engineered to remove a wide array of downhole obstructions, ensuring a clear path for well operations. Optimized Debris Removal: Equipped with multiple flushing holes, the TPM facilitates the circulation of drilling fluid, efficiently clearing milled particles from the well and cooling the cutting edge. Durable Carbide Construction: Features a robust body with carbide welded on, available in crushed carbide and various insert designs to match milling requirements against different materials. Customizable Geometry: The tapered design is tailored to enhance the ID of wellbore restrictions, with customizable geometry including the length of the cone, minimal OD, and maximal OD based on client specifications. Extended Service Life: The longevity of the carbide components is maximized through optimal milling modes and can be further extended with Marlin Oil Tools' comprehensive redress services for worn carbide. Powered by Downhole Motors: Rotation facilitated by a downhole motor enhances the milling efficiency, making the TPM an integral part of the well intervention toolkit. Elevate your well intervention operations with the TPM Tapered Mill from Marlin Oil Tools, a leading-edge solution designed for the efficient removal of downhole obstructions in the oil and gas industry. This downhole tool combines advanced milling technology with a tapered design to effectively increase the ID of wellbore restrictions, ensuring operational success. With its durable construction, customizable geometry, and optimized debris removal capabilities, the TPM Tapered Mill is essential for achieving a clear and operational wellbore. Whether addressing emergency lost equipment or routine well maintenance, the TPM Tapered Mill offers precision, efficiency, and reliability. Trust Marlin Oil Tools for your well intervention needs and experience unparalleled performance and service life with the TPM Tapered Mill. Why Choose the TPM Tapered Mill from Marlin Oil Tools? Precision Milling: Delivers unmatched efficiency in grinding down and removing wellbore obstructions. Customization to Fit Operational Needs: Offers tailored solutions to meet specific well intervention challenges. Robust and Reliable: Built to withstand the harsh downhole environment and ensure prolonged tool effectiveness. Expert Support and Services: Backed by Marlin Oil Tools' commitment to quality and customer support, including redress services for extended tool life. The TPM Tapered Mill by Marlin Oil Tools represents the pinnacle of downhole milling innovation, providing a versatile, durable, and efficient solution for well intervention and maintenance operations. Incorporate the TPM Tapered Mill into your toolkit for smoother, more effective well interventions.

Buy

Made to Order

Manufacturer

New

API

Land Freight


Safe-T-Whip Rentals

Restraint Rentals

Discover the Convenience of Safe-T-Whip Equipment Rental: Your Hassle-Free Solution At Safe-T-Whip & Restraints Inc., we understand the ever-changing needs of your oilfield projects. That's why we are thrilled to offer our top-of-the-line Safe-T-Whip restraints on rental, providing you with a maintenance-free, certified, and budget-friendly solution. Maintenance-Free Peace of Mind: Say goodbye to the hassles of maintenance and inspections. With Safe-T-Whip equipment rental, you'll receive a full line of pre-inspected and certified restraints, ready to tackle the challenges of your projects. Focus on your core operations, while we take care of the safety aspect for you. Try Before You Commit: Not sure if the Safe-T-Whip system is right for your project? Our equipment rental option is perfect for trying out the system before making a long-term commitment. Discover the benefits and efficiency of our restraints firsthand. Flexibility for Short-Term Projects: Short-term projects demand flexibility, and we've got you covered. Our rental service caters to projects of any duration, allowing you to equip your site with top-notch safety restraints for the required timeframe, without long-term commitments. Certified Installation or In-House Training: As part of our turn-key project services, our team of certified installers can assemble the entire Safe-T-Whip system for you, ensuring everything is in place for optimal safety. Alternatively, we offer comprehensive training to one of your own team members through our Safe-T-Whip certification process, empowering them to assemble or disassemble the system on demand. Nationwide Availability: Easy access to our safety solutions is our top priority for you. Safe-T-Whip equipment rental is available throughout Canada, either directly from Safe-T-Whip & Restraints Inc. or through our approved and certified suppliers. No matter where your project is located, we've got you covered. Tailored Solutions for Your Needs: Every project is unique, and so are our rental plans. Let us know your project requirements, and we'll work closely with you to provide the best-suited solution, ensuring the fastest and easiest way to secure the required number of restraint lengths, no matter the project's size. Safety Simplified: Safe-T-Whip equipment rental offers a simplified approach to safety, empowering you to focus on your operations with the confidence that your workforce is protected by the industry's best restraint system. Contact us today and explore the world of convenience and safety with Safe-T-Whip & Restraints Inc. Let us take care of your safety needs while you focus on what you do best - running a successful oilfield operation.

Rental

Made to Order

Service

New

API

Air Freight


Public Sector Verticals

Cybersecurity

ALCiT in Mississauga

Meer informatie

Elevate Public Sector Operations with ALCiT's Dedicated Solutions In the world of the public sector, the demands are constant – achieving more with less while navigating an ever-expanding sea of complexity. As challenges evolve, cybersecurity remains a paramount concern. ALCiT understands the intricate dynamics you face, and we're here to provide solutions that not only work but excel in the unique landscape of the public sector. Security: Your Ultimate Priority, Our Expertise Cybersecurity isn't just a checkbox; it's a commitment. In the public sector, where the stakes are high and the responsibilities are monumental, security can't be compromised. ALCiT is your dedicated partner, ensuring that every solution we provide is fortified with security measures that align with the gravity of your mission. A Portfolio Tailored to Excellence ALCiT understands that one-size-fits-all solutions won't cut it. That's why we've curated a portfolio of solutions, each adaptable to your unique needs. Our solutions, rooted in enterprise-grade tools, are pre-configured for optimal performance, delivering maximum value in record time. Whether deployed individually or as an integrated suite, we ensure your operations run seamlessly. Public Sector Solutions That Excel Security Operation Center (SOC) as a Service: Trust is earned through vigilance. Our 24/7 SOC monitoring offers round-the-clock surveillance, providing real-time threat detection and response. In just weeks, your security operations will be elevated to new heights. Network Access Control (NAC): Control isn't a luxury; it's a necessity. ALCiT's NAC empowers you to regulate network access, ensuring only authorized devices enter your domain, bolstering security and control. Network Refresh: Simplify your network management and enhance security posture with our network refresh solutions. Choose between a Service-based approach or a purchase model – either way, we ensure your network is optimized for success. Secure Today, Empower Tomorrow ALCiT's commitment to the public sector goes beyond services; it's a partnership built on trust and excellence. Let us empower your operations, enable your teams, and ensure your data remains fortified against the evolving challenges of the digital realm. Elevate public sector operations with ALCiT's dedicated solutions.

Service

Made to Order

Service

New

ISO

Digital


Fiber Optic Fusion Splicing

Harnessing the Power of Seamless Connectivity in the Oil and Gas Sector with Nulux’s Fiber Optic Fusion Splicing In the intricate and demanding environments of the oil and gas industry, ensuring seamless, reliable, and robust data transmission is paramount. Every segment of the extensive energy value chain, from exploration and extraction to transportation and refinement, hinges upon unfettered communication and data flow. Nulux Network Solutions, steadfast in its commitment to supporting customers towards a more sustainable future, proudly shines a spotlight on one of its sterling services: Fiber Optic Fusion Splicing. Demystifying Fusion Splicing Fusion splicing is not merely a technical process; it’s an art form where two pieces of fiber optic cables are meticulously joined together to craft a permanent bond. It is not merely about connecting two cables; it's about facilitating a continual, unbroken pathway for data, ensuring that your critical information traverses across your networks without hesitation or impedance. The resultant creation is a single, coherent piece of fiber, capable of being utilized in myriad applications, especially where the amalgamation of multiple fibers or cables is necessitated. Given the specialized nature and the precise equipment required to perform fusion splicing, it is indispensable to collaborate with a proficient service provider – a role where Nulux jubilantly finds its calling. Ensuring Unparalleled Data Transmission with Fusion Splicing Embarking upon fusion splicing is not merely opting for a connection; it's choosing the promise of the most reliable, consistent, and high-fidelity data transmission possible. This not only amplifies the effectiveness of your optical network but also significantly bolsters its durability, ensuring that your operations in the oil and gas sectors are perpetually connected and operational. Why Nulux Stands Unparalleled in Fiber Optic Fusion Splicing Our expertise transcends providing products and solutions; it’s a commitment to walk alongside our customers, guiding them on their journey towards not just operational efficiency but towards a future that leans into sustainability. At Nulux, we provide: Expertise Across the Energy Value Chain: From upstream to downstream, our services encapsulate the entirety of the energy value chain, ensuring that every node of your operation is seamlessly connected. Custom Solutions: We delve into understanding the unique operational landscape of your facilities, providing tailored fiber optic solutions that resonate with your specific requirements. Sustainable Future: Aligned with the global pivot towards sustainability, our solutions are crafted not just with an eye on operational efficiency but also with a commitment towards fostering a sustainable future. Infinite Possibilities with Uninterrupted Connectivity Engineering professionals in the oil and gas sector grapple with a multitude of challenges, and data transmission should not be one of them. Fiber Optic Fusion Splicing by Nulux is not merely a service; it's a pledge of uninterrupted connectivity, a guarantee of flawless data transmission, and a commitment to bolstering your operations with unparalleled connectivity solutions. In the realms of the digital evolution of the oil and gas sector, every bit of data is vital, and ensuring it reaches its destination without interruption is critical. Choose Nulux Network Solutions for your Fiber Optic Fusion Splicing, and let’s craft a future where your data flows as seamlessly as your operations. Your network. Our solutions. Nulux’s promise of a connected future.

Service

In Stock

Service

New

ISO


Field Operators

Operations Support

Trusted Field Operators: The Heart of Lovat Gas Solutions At Lovat Gas Solutions, our success is built upon the expertise and dedication of our field operators. With over 80 years of combined experience, our team draws upon their vast knowledge to deliver exceptional service. From assisting gas utilities during pipeline outages to executing complex flare gas capture projects, our field operators are at the forefront of making it all happen. What sets our field operators apart? 1. Extensive Experience: Our team of field operators possesses a wealth of experience gained through their involvement in various gas-related projects. Whether it's managing pipeline outages or executing flare gas capture initiatives, they have the expertise to handle diverse challenges with precision and efficiency. 2. Compressed and Cryogenic Gases Expertise: We specialize in compressed gases and liquefied cryogenic gases. Our field operators have undergone rigorous in-house training, equipping them with the necessary skills to handle these gases safely and efficiently. You can trust them to deliver gas wherever it's needed, ensuring a seamless supply for your operations. 3. Safety-Focused Approach: Safety is paramount in everything we do. Our field operators receive comprehensive safety training to ensure compliance with industry standards and best practices. They are well-prepared to support your operations on short notice, providing a reliable and safe service that you can depend on. 4. Nationwide Reach: With experience spanning from the north to the south and east to west of Canada, Lovat Gas Solutions has established a strong presence across the country. Our field operators are well-versed in the unique requirements of different regions, allowing us to provide comprehensive support to clients nationwide. When you choose Lovat Gas Solutions, you gain access to a team of field operators who are dedicated to delivering excellence. With their expertise, commitment to safety, and nationwide reach, they are ready to support your mobile gas needs. Contact a Lovat Gas Solutions expert today to discuss how our skilled field operators can assist you. Whether you require gas supply, project execution, or emergency support, trust our team to deliver reliable solutions that drive the success of your operations. Experience the difference of working with field operators who are the heart of Lovat Gas Solutions.

Service

In Stock

Service

Used

API

Land Freight


HDI 1000B Pressure Gauge System

Electronic Pressure Gauge

Houston Digital Instruments (HDI) is excited to present the 1000B Pressure Gauge System, a high-performance solution designed to meet your pressure measurement needs. With its intrinsically safe, solid-state electronic design, this gauge system provides accurate and easily readable pressure readings in any lighting conditions. Unparalleled Readability and Accuracy: The 1000B Pressure Gauge System is engineered to deliver exceptional readability, ensuring that you can access crucial pressure information with ease. Regardless of the lighting conditions in your environment, the gauge's display remains clear and easily visible. With a measurement range of up to 20,000 psi and an accuracy of 0.50% of full scale, you can trust that your pressure readings are precise and reliable. Versatile Application: The 1000B is designed to serve as either a primary or secondary display, offering flexibility for your specific requirements. With slave/secondary display options available, you can easily integrate the gauge system into your existing setup. Each 1000B consists of a Gauge Display, Inline Cable, and Sensor Assembly, allowing for convenient placement of the display relative to the connection point. Benefit from the versatility and adaptability of our field-proven platform, which has been refined over 30 years of industry experience. Durability and Low Maintenance: At HDI, we prioritize safety, accuracy, reliability, and low maintenance for our customers. The 1000B Pressure Gauge System is battery-powered, eliminating the need for external power sources and providing hassle-free operation. With a field repairable system, you can minimize downtime and reduce maintenance costs, ensuring continuous and efficient pressure monitoring. The low battery indicator keeps you informed of the system's power status, enabling you to stay prepared and maintain uninterrupted performance. Tailored to Your Application: The 1000B can be combined with various sensor types for pressure, load, force, and torque applications in a wide range of industries. Our team of experts is ready to assist you in selecting the optimal configuration for your specific needs. Whether you require 2" Male NPT, 2" 1502, 2" 2002/2202, or flanged connections, we offer customization options to seamlessly integrate the gauge system into your setup. Achieve accurate and reliable pressure measurements that meet your unique application requirements. Exceptional Performance in Demanding Environments: We understand that certain industries present challenging conditions, including high vibration environments. The 1000B Pressure Gauge System is engineered to deliver consistent performance, even in such demanding settings. With its solid-state platform, free from fluids or moving parts, the gauge system ensures durability and reliable operation in the face of vibrations and harsh environmental conditions. Expand Your Measurement Capabilities: Upgrade your pressure measurement capabilities with the 1000B Pressure Gauge System. Benefit from its reliable performance, durability, and ease of use. With configuration options such as 4-20mA output, 4-20mA input, backlighting, externally powered options, 0-1 volt output, and secondary display compatibility, you can tailor the system to your specific requirements. Contact Houston Digital Instruments today to discuss your specific application needs. Our team of experts is dedicated to helping you select the ideal solution for your pressure measurement requirements. Trust HDI for excellence in measurement and monitoring solutions. Together, we'll achieve efficiency, safety, and success.

Buy

In Stock

Manufacturer

New

API

Air Freight


TIG AC/DC 301 Pulse Welding Machine

Welder

Discover Precision Welding with the TIG AC/DC 301 Pulse! At Canaweld, we take pride in providing welding solutions that are powerful, intelligent, and reliable. The TIG AC/DC 301 Pulse is no exception – a welding machine that exemplifies precision and performance. Designed to meet the diverse needs of professionals in the oil and gas industry, this welding powerhouse offers unparalleled versatility and ease of use. Versatile Welding Capabilities The TIG AC/DC 301 Pulse is a welding marvel, capable of both AC and DC TIG welding, including stainless, mild steel, and aluminum, as well as Stick welding. Whatever the application, our advanced TIG welding parameters enable you to fine-tune the welding process, delivering exceptional results every time. From intricate welding tasks to heavy-duty projects, the AC/DC 301 Pulse rises to the occasion, giving you the flexibility to tackle any welding challenge. Power Meets Intelligence Built with intelligence and efficiency in mind, the AC/DC 301 Pulse features digital control of all welding parameters. This intuitive interface empowers you to tailor the welding settings precisely to your needs, ensuring flawless welds with ease. Additionally, the easy-to-use pulse mode, complete with the "easy-pulse" function, simplifies your welding experience, providing maximum control over your welds. Durable and Portable Design Designed for the rigors of the oil and gas industry, the TIG AC/DC 301 Pulse boasts a compact and innovative design. The shock-proof fiber compound front panel and control panel protection safeguard the machine against accidental impact, ensuring long-lasting performance even in challenging environments. The robust handle integrated into the chassis makes it easy to carry, offering mobility and convenience when moving between welding tasks. Efficient and Reliable Performance With a high duty cycle, the AC/DC 301 Pulse proves to be a workhorse, perfect for production TIG welders who demand the best all day, every day. Its exceptional TIG welding characteristics, paired with automatic compensation for power fluctuations, guarantee consistent and reliable performance in every weld. Unmatched Control and Customization Take control of your welding with the TIG AC/DC 301 Pulse. Special TIG torches enable remote control of welding parameters directly from the torch, giving you the flexibility to fine-tune your welds while working. Furthermore, optional software customization offers added features and tailored settings, enhancing your welding experience even further. Experience the Canaweld Advantage As with all Canaweld products, the TIG AC/DC 301 Pulse is backed by our commitment to quality and customer satisfaction. We stand by the durability and reliability of our welding machines, offering a comprehensive 3-year warranty for your peace of mind. Elevate your welding capabilities with the TIG AC/DC 301 Pulse. Discover precision welding like never before and let Canaweld be your partner in achieving excellence in every weld. Embrace the power of intelligence with the TIG AC/DC 301 Pulse - Welding Perfected!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


All terrain forklifts Leasing

Elevate Your Operational Capabilities with All Terrain Forklift Leasing from CWB National Leasing Enhancing Efficiency and Flexibility in Your Material Handling For businesses that operate in challenging environments or require versatile material handling solutions, all terrain forklifts are indispensable. Leasing all terrain forklifts through Canadian Western Bank (CWB) National Leasing offers a strategic and financially practical solution for businesses seeking to enhance their operational capabilities. Here’s how leasing all terrain forklifts can benefit your business: 1. Fast Equipment Deployment CWB National Leasing recognizes the importance of minimizing downtime in your operations. They offer a rapid leasing process, with decisions typically made within 48 hours of application submission. This efficiency means your all terrain forklifts can be delivered and operational quickly, ensuring that your projects and workflows continue seamlessly. 2. Enhanced Financial Flexibility Leasing all terrain forklifts with CWB National Leasing boosts your buying power. It enables you to spread costs over periodic payments rather than making a significant upfront investment, freeing up capital for other business needs. Additionally, the option to add extra features or accessories to your forklifts for a small payment increase allows for customization to meet specific operational requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your all terrain forklifts start contributing to your business’s revenue while still being paid off. This approach helps maintain a healthy balance between expenses and income, crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and aligned with your financial capacity. 5. Potential Tax Benefits Leasing all terrain forklifts can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease all terrain forklifts through CWB National Leasing is a strategic decision that equips your business with versatile and robust material handling equipment while maintaining financial flexibility.

Service

In Stock

Service

New

ISO


Tailor Made Gas Solutions

Unique Gas-Related Application

Tailor-Made Gas Solutions: Your Trusted Partner for Mobile Gas At Lovat Gas Solutions, we understand that every gas-related application is unique. That's why we leverage our extensive experience and expertise to develop tailor-made solutions that perfectly match your specific needs. Whether it's volume, application, duration, or location, we consider all the relevant factors to deliver the best solution for your job. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With years of industry experience, our team has a deep understanding of gas-related challenges and requirements. We have successfully designed and executed numerous projects across various sectors, earning the trust and loyalty of our customers. 2. Customized Approach: We believe in the power of customization. By considering your specific requirements, we develop fit-for-purpose solutions that precisely address your needs. Our solutions are not one-size-fits-all; they are carefully tailored to ensure optimal performance and efficiency for your application. 3. Quality Solutions: Our commitment to quality is unwavering. We take pride in delivering solutions that meet the highest standards of performance, safety, and reliability. When you choose Lovat Gas Solutions, you can trust that our fit-for-purpose solutions will exceed your expectations and deliver exceptional results. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We prioritize open communication and collaboration to ensure that we fully understand your objectives and challenges. Our dedicated team goes the extra mile to provide personalized service and support, making us the first call for our customers whenever they need mobile gas solutions. Contact Lovat Gas Solutions today and discover how we can help you with your mobile gas needs. We are confident that our tailor-made solutions will exceed your expectations, and one job is all it takes for you to experience the excellence of Lovat Gas Solutions. Let us be your trusted partner in delivering exceptional gas solutions that drive the success of your operations. Together, we will find the perfect fit for your gas requirements with Lovat Gas Solutions.

Service

Made to Order

Service

New

ISO

Land Freight


Regular Duty Anchor for 1502 hammer union piping

1/2″ 12-Strand HMPE fiber

Introducing Safe-T-Whip RD Anchor (SW-A-RD-01): Your Anchor for Unmatched Safety and Reliability Safety is our top priority at Safe-T-Whip & Restraints Inc., and we are thrilled to present our latest innovation - the SW-A-RD-01 Safe-T-Whip RD Anchor. This indispensable anchor is designed to provide robust restraint for flowline installations in the oilfield, ensuring the utmost safety for your team and equipment, even in the most demanding conditions. Unparalleled Design and Performance: Identified by its bright yellow color and yellow tag, SW-A-RD-01 is made from 1/2" 12-Strand HMPE fiber, making it a Regular Duty (RD) anchor ideal for use on 2-inch 1502 hammer union pipelines up to 5000psi, 3-inch iron up to 3000psi, or 4-inch iron up to 2000psi. When your operations require an anchor connection for flowline restraint, it is crucial to use a designated Safe-T-Whip™ Anchor, ensuring maximum safety and reliability. Revolutionary Modulus Synthetic Fiber: Safe-T-WhipTM harnesses the power of high modulus polyethylene (HMPE), also known as ultrahigh molecular weight polyethylene (UHMWPE). This synthetic fiber is as strong as steel-wire ropes, yet significantly lighter, making it easy to handle, store, and transport. With its resistance to pressure hose and immunity to corrosion, oil spills, and most chemicals, our anchor ropes are specifically engineered to thrive in the extreme drilling and fracking conditions of the Canadian oil patch. Chemical Immersion and Temperature Resilience: SW-A-RD-01 demonstrates exceptional strength retention after 6-month immersion in various chemicals, including sea water, hydraulic fluid, gasoline, hydrochloric acid, and more. Additionally, it operates efficiently within a wide temperature range from -65°C to +65°C. Our anchor ropes are chemically inert, ensuring they stand the test of time and remain reliable under the harshest conditions. Your Economic and Comprehensive Solution: Purchasing a Safe-T-WhipTM system offers numerous advantages for multiple and long-term projects. Owning your safety restraint system gives you control over your job sites and projects without any delays, while also allowing you the flexibility to rent or purchase additional components as your needs change. The durability and ease of storage of our system ensure a long-lasting investment that will protect your workforce and hardware for years to come. Full Certified Training and In-house Financing: When you choose Safe-T-Whip & Restraints Inc., you not only acquire top-notch safety equipment but also receive a full certified Safe-T-Whip training program on installation, maintenance, and storage. Our experts are available to support your team throughout any project, ensuring smooth assembly and disassembly. Additionally, we offer in-house financing on all new projects, making it easier than ever to acquire your complete safety restraint system. Global Shipping Made Easy: Thanks to the lightweight nature of our system, we can provide direct and economical shipping throughout Canada and the world. Rest assured that your Safe-T-Whip RD Anchor will reach you swiftly and securely, ready to deliver unbeatable safety on your worksites. Protect Your Worksite with Safe-T-Whip: Invest in the SW-A-RD-01 Safe-T-Whip RD Anchor and safeguard your worksite, hardware, and workforce while ensuring full compliance with work safety regulations. Trust Safe-T-Whip & Restraints Inc. for the ultimate safety solutions in the oilfield industry.

Buy

In Stock

Product & Service

New

API

Air Freight


Stay Cybersecure

Cybersecurity

ALCiT in Mississauga

Meer informatie

Stay Cybersecure with ALCiT: Your Shield in an Uncertain Digital Realm In a world where digital threats lurk at every corner, staying cybersecure is no longer an option—it's a necessity. But we get it; navigating the intricacies of cybersecurity can be overwhelming, even frightening. That's where we come in, your unwavering allies in the pursuit of digital safety. Empowerment Through Expertise ALCiT stands as a beacon of assurance in the cybersecurity landscape. As trusted experts, we specialize in assisting Small and Medium Enterprises (SMEs) on their journey to become and remain cybersecure. You've laid the foundation, you've improved your cyber resiliency, and now it's time to complete the puzzle by staying cybersecure. Master the Art of Staying Secure Cyber threats are relentless, but so are we. With ALCiT's managed services, you can confidently detect cyber threats, respond to incidents, and maintain your cybersecure stronghold. Our solutions go beyond the traditional; they encompass a holistic approach that equips your organization with the tools and strategies needed to stay ahead. Why Choose Cybersecurity with ALCiT? Tech in Check: Keeping your technology secure is our priority. We diligently monitor, update, and optimize your tech environment, ensuring every vulnerability is addressed and every weakness fortified. Team Training: Empower your team to be your first line of defense. Our comprehensive training programs arm them with the knowledge to identify and respond effectively to potential threats. Vigilance is Key: Staying vigilant is half the battle. Our managed services include real-time monitoring, ensuring that any abnormal activity is detected and neutralized promptly. Effective Response: Cyber incidents can strike anytime. With ALCiT by your side, you're equipped to respond swiftly and effectively, minimizing potential damage and ensuring business continuity. Efficient Recovery: The aftermath of an attack can be daunting, but we've got your back. ALCiT's recovery strategies are designed to expedite your return to normalcy, reducing downtime and impact. Secure Today, Thrive Tomorrow ALCiT stands for more than just services; we stand for security, empowerment, and peace of mind. Let us be your cybersecurity partner as you navigate the intricate landscape of digital threats.

Service

Made to Order

Service

New

ISO


Scales Leasing

Streamline Your Logistics with Trucking Scale Leasing from CWB National Leasing Elevating Your Transportation and Logistics Efficiency with Smart Equipment Solutions For businesses in the transportation, logistics, and warehousing industries, accurate and reliable trucking scales are indispensable for efficient operations. Leasing trucking scales through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and efficient solution for your weighing needs. Here’s how leasing trucking scales can transform your logistics and transportation operations: 1. Rapid Equipment Accessibility Understanding the urgency of maintaining streamlined logistics, CWB National Leasing provides a fast and efficient leasing process. With lease decisions typically made within 48 hours, your trucking scales can be delivered and operational swiftly, minimizing downtime and enhancing your operational efficiency. 2. Enhanced Financial Flexibility Leasing trucking scales with CWB National Leasing boosts your financial leverage. It enables you to conserve capital by opting for manageable periodic payments instead of a significant upfront investment, freeing up resources for other essential business activities. Moreover, the option to add extra features or accessories to your scales for a small payment increase allows for customization to meet specific business requirements. 3. Effective Cash Flow Management With smaller lease payments spread over the term, your trucking scales start contributing to your business’s revenue while they're being paid off. This balanced financial approach helps maintain a healthy expense-to-revenue ratio, which is crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is especially beneficial for businesses with seasonal or variable income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Advantages Leasing trucking scales can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease trucking scales through CWB National Leasing is a strategic decision that provides your business with essential weighing equipment while maintaining financial agility. It ensures access to high-quality trucking scales, crucial for accurate load management and compliance, without the financial strain of a large upfront purchase. This leasing approach enables enhanced operational efficiency, improved accuracy in logistics, and increased profitability, helping your business to excel in the competitive transportation and logistics industry.

Service

In Stock

Service

New

ISO


Lead Impression Block

Downhole Tools

Elevate Downhole Diagnostics with HOCA Oil Tools' Lead Impression Blocks In the intricate world of downhole operations, understanding the precise conditions within the wellbore is not just beneficial—it's imperative. At HOCA Oil Tools, we specialize in providing top-tier downhole slick line tools that cater to the diverse needs of the oil and gas industry. A standout in our product lineup is the Lead Impression Block (LIB), an indispensable tool designed for capturing clear, detailed impressions of downhole conditions. Lead Impression Blocks: The Key to Accurate Downhole Intelligence HOCA's Lead Impression Blocks are engineered for exceptional performance, providing operators with the critical data needed to make informed decisions. Made with high-quality materials, our LIBs are designed to withstand the challenging environments found within wellbores, ensuring reliable results every time. Six Benefits of Using HOCA's Lead Impression Blocks: Precision Diagnostics: Our LIBs provide precise imprints of the downhole environment, enabling accurate identification of obstructions, tool fishings, and the condition of the wellbore. Cost-Efficiency: By delivering accurate downhole data, our LIBs help avoid unnecessary operations and reduce the risk of costly mistakes, leading to more efficient and cost-effective well management. Easy Interpretation: The clear impressions made by our LIBs allow for straightforward analysis, enabling quick decision-making and streamlined operations. Durability and Reliability: Designed for the rugged downhole environment, HOCA's Lead Impression Blocks are built to last, providing consistent, reliable results even in the most challenging conditions. Versatility: Compatible with various downhole tools and suitable for multiple applications, our LIBs are a versatile addition to any downhole toolset, making them ideal for a wide range of operations. Enhanced Safety: By providing accurate information about downhole conditions, our LIBs help minimize the risks associated with downhole operations, enhancing overall safety for personnel and equipment. Transform Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we're committed to innovation and excellence. Our Lead Impression Blocks are a testament to our dedication to providing the oil and gas industry with tools that not only meet but exceed expectations. By integrating our LIBs into your operations, you can expect enhanced diagnostic capabilities, improved operational efficiency, and reduced costs. Embrace the clarity and precision offered by HOCA's Lead Impression Blocks and experience a new level of downhole diagnostic prowess. Choose HOCA Oil Tools for all your downhole needs and unlock the full potential of your wellbore operations.

Buy

In Stock

Product & Service

New

API

Air Freight


Chemical Stimulation

Precision Chemical Stimulation with InWaTec Combined’s Mini-Coil Services In the realm of enhancing well productivity, chemical stimulation stands as a cornerstone technique, vital for improving hydrocarbon flow from reservoir to surface. InWaTec Combined proudly offers Mini-Coil Services, a highly specialized approach to chemical stimulation that addresses the need for precise fluid placement and robust performance under high pressures. Our Mini-Coil Tubing is the ideal conduit for delivering stimulation fluids in exact quantities directly to the target zones within the well. This precise delivery is critical for the effectiveness of chemical treatments, ensuring that every drop of stimulating fluid is utilized to its maximum potential. Advantages of Mini-Coil Tubing in Chemical Stimulation: High-Pressure Capability: The smaller diameter of our Mini-Coil Tubing allows for operations at significantly higher pumping pressures compared to traditional coiled tubing. This is particularly advantageous during chemical stimulation, where certain treatments require the application of fluids under substantial pressure to achieve optimal penetration and reaction within the reservoir. Precision in Fluid Placement: The precise placement of stimulation chemicals is crucial for the success of any treatment. Our Mini-Coil Tubing services ensure that the stimulation fluids are deposited exactly where needed, which is particularly beneficial in complex reservoirs or when targeting specific formation layers. Efficient Well Lifting: Post-stimulation, wells often require assistance to commence or resume production. The Mini-Coil Tubing is not only perfect for fluid delivery but also for well lifting operations, facilitating the transition from treatment to production smoothly and effectively. Tailored Operations: Understanding that flow rates and snubbing force are aspects where Mini-Coil Tubing has limitations, InWaTec Combined has optimized the design and operation of our Mini-Coil Services to maximize their strengths. Our team of experts can adjust operations to suit the specific conditions and requirements of each well, ensuring that the limitations are mitigated and the advantages are fully leveraged. InWaTec Combined’s Mini-Coil Services represent a fusion of innovation, precision, and efficiency. We bring this triad to every chemical stimulation project, ensuring that our clients' wells receive the most meticulous and effective treatment possible. By choosing InWaTec Combined for your chemical stimulation needs, you are opting for a partner dedicated to enhancing your well performance with cutting-edge solutions. Our Mini-Coil Services are a testament to our commitment to pushing the boundaries of what is possible in well intervention and stimulation. Experience the difference with InWaTec Combined’s Mini-Coil Services—where small-scale delivery meets large-scale impact, driving your wells towards maximum productivity.

Service

In Stock

Service

New

API

Land Freight


Woodworking equipment Leasing

Elevate Your Craft with Woodworking Equipment Leasing from CWB National Leasing Transforming Your Woodworking Projects with Flexible and Efficient Equipment Solutions For businesses in the woodworking industry, from small workshops to large manufacturing plants, having access to high-quality woodworking equipment is crucial for productivity and craftsmanship. Leasing woodworking equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution to enhance your woodworking capabilities. Here’s how leasing woodworking equipment can benefit your business: 1. Swift Access to Advanced Equipment CWB National Leasing prioritizes your need for efficient operations. They offer a rapid leasing process, typically approving applications and notifying your equipment dealer about payment within 48 hours. This quick turnaround ensures that your woodworking equipment can be delivered and operational swiftly, minimizing any disruption to your projects. 2. Enhanced Financial Power Leasing woodworking equipment with CWB National Leasing increases your buying power. It allows you to spread costs over periodic payments rather than making a large upfront investment, freeing up capital for other areas of your business. Additionally, the option to add extra features or accessories to your equipment for a small payment increase allows for customization to meet your specific production needs. 3. Effective Cash Flow Management Smaller lease payments over the term mean your woodworking equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, which is essential for the financial health and growth of your business. 4. Flexible Payment Structures CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal or variable income, ensuring that payments are manageable and aligned with your financial situation. 5. Potential Tax Benefits Leasing woodworking equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can optimize your business’s tax position. Conclusion Opting to lease woodworking equipment through CWB National Leasing is a strategic decision that equips your business with essential tools while maintaining financial flexibility. It ensures access to state-of-the-art equipment, vital for producing high-quality wood products, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, increased production capacity, and greater profitability, helping your woodworking business to thrive in a competitive market.

Service

In Stock

Service

New

ISO


Split-Shot Explosive runs

Streamlining Pipe Recovery: Introducing InWaTec Combined’s Innovative Split Shot Cutter Services When traditional methods fall short in the well servicing industry, innovation leads the way. InWaTec Combined is at the forefront of this innovation with our redesigned Split Shot Cutter Services, offering a superior alternative where conventional jet cutters cannot perform or are unsuitable. Our focus on customer-centric design and operational efficiency sets a new standard in pipe recovery solutions. The reinvented Split Shot Cutter encapsulates our commitment to ease of use and safety, allowing for straightforward electrical arming prior to loading the explosive segments. This feature not only enhances safety by simplifying the preparation process but also significantly reduces the time required to get the cutter downhole and ready for action. Our Split Shot Cutters are engineered for precision and reliability, designed to tackle the most challenging scenarios in pipe recovery. Their unique linear configuration enables the cutter to be placed precisely next to the collar or connection. Secured by robust inline magnets, the cutter ensures optimal positioning for a clean and targeted operation. Once detonated, the Split Shot Cutter works its magic, cleanly splitting the collar or connection. This critical action breaks the grip on the pipe, allowing for the straightforward extraction of the stuck sections. The result is a liberated wellbore, cleared of obstructions with minimal fuss and downtime. InWaTec Combined’s Split Shot Cutter Services are not just a tool but a transformative solution for well intervention. The technology is a testament to our innovative spirit and dedication to providing our clients with the most advanced and effective recovery methods available. Our cutters don’t just cut; they redefine the recovery process, offering unparalleled efficiency and effectiveness. Choosing InWaTec Combined's Split Shot Cutter Services means partnering with a company that prioritizes your operational success and safety. With our advanced technology and expert support, you can trust that even the most stubborn pipe recovery challenges will be met with a swift and satisfactory resolution. Experience the next level of pipe recovery services with InWaTec Combined, where we split the difference between complication and solution.

Service

In Stock

Service

New

API

Land Freight


Large Aluminum Jaws for ROV

Aluminum Jaws - Large

Introducing Poseidon Robotics' Large Aluminum Jaws: Elevating Subsea Search and Rescue Operations Poseidon Robotics, a leading name in subsea robotics and ROV solutions, is proud to announce the launch of our latest innovation: the Large Aluminum Jaws. Designed to enhance the performance of the renowned Blue Robotics Newton Subsea Gripper, these jaws are set to revolutionize search and rescue (SAR) applications and beyond. A Collaborative Breakthrough At Poseidon Robotics, collaboration and customer-centricity lie at the core of our values. We have worked closely with our esteemed partners at Blue Link and engaged with several SAR customers to develop the Large Aluminum Jaws. This joint effort ensures that our product aligns perfectly with the unique needs and challenges faced by search and rescue operators in subsea environments. Engineered for Performance The Large Aluminum Jaws have been meticulously engineered to deliver superior performance in grabbing larger objects underwater. Comparing our Aluminum model to the standard jaws, it becomes evident that we have achieved the perfect balance between strength, precision, and functionality. Precision and Durability Crafted from premium quality Aluminum (6061-T6), our jaws boast exceptional strength and durability. The hard anodized black finish further enhances their resilience, making them resilient to the harsh conditions of subsea operations. Precision flanged bushings ensure smooth and reliable operation, enabling operators to accomplish their tasks with confidence. Versatility Redefined While the Large Aluminum Jaws are designed primarily with search and rescue applications in mind, their versatility extends to various other tasks in subsea environments. Whether it's retrieving objects from the depths or handling delicate operations, these jaws offer unmatched adaptability and efficiency. Your Partner in Subsea Excellence When you choose Poseidon Robotics' Large Aluminum Jaws, you partner with a team dedicated to excellence and customer success. Our commitment to providing the highest quality products is matched only by our dedication to unparalleled customer support. We are here to ensure that you make the most of your subsea operations with our cutting-edge solutions. Experience the Future of Subsea Grabbing Unlock a new era of efficiency and precision in search and rescue operations with Poseidon Robotics' Large Aluminum Jaws. Whether you are a SAR professional or involved in other subsea applications, these jaws will elevate your performance to new heights. Contact Us Today Contact Poseidon Robotics today to learn more about our Large Aluminum Jaws and explore how they can transform your subsea operations. Our team of experts is ready to assist you every step of the way. Embrace the future of subsea robotics with Poseidon Robotics!

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Packer Setting

Enhancing Well Efficiency: InWaTec Combined’s Precision E-line Packer Setting Services The backbone of any well’s structural integrity and operational efficiency lies in the strategic placement and setting of production packers. InWaTec Combined’s E-line Packer Setting Services provide meticulous installation of these critical components, ensuring an optimal seal and isolation within your wellbore. A production packer is not just a piece of hardware; it’s a guardian that ensures the separation of production zones, safeguards the casing from pressure, and enhances the overall management of the well. Our E-line Packer Setting Services cater to both production and service packer requirements, providing versatile solutions tailored to the unique challenges of your well operations. Production Packers: These remain in place during well production, set above the top perforations or sand screens. They are pivotal in multi-zone reservoirs, where they isolate perforations for each zone, allowing for selective production through the use of sliding sleeves. Service Packers: Employed temporarily during well servicing tasks like cement squeezing, acidizing, fracturing, and well testing, service packers are essential for the precise and safe execution of these operations. Packers are designed with a keen eye on reliability—metal slips and rubber elements, or metal rings in high-pressure scenarios, ensure a firm grip and seal against the casing ID. Our E-line Packer Setting Services employ the latest in axial load technology, whether hydraulic, mechanical, or chemical, to expand and secure these packers at the optimal depth. For permanent well configurations, our permanent packers offer a cost-effective and robust solution, boasting superior sealing and gripping capabilities. When retrievability is key, our retrievable packers provide flexibility for secondary recoveries, re-completions, or production tubing changes, with designs that ensure ease of removal and the possibility of reuse after servicing. InWaTec Combined’s commitment to excellence in E-line Packer Setting Services is unwavering. We provide not only the tools but also the strategic foresight and technical support to ensure that your packer installation enhances well performance, maintains integrity, and supports your production goals. Partner with InWaTec Combined for your packer setting needs and experience the assurance that comes from precision, durability, and adaptability. Our services are designed to secure your well’s future, one packer at a time.

Service

In Stock

Service

New

API

Land Freight


Tubing End Locator

Wireline Services

InWaTec Combined: Pinpoint Precision with Tubing End Locator Services Accuracy is the cornerstone of successful well intervention and maintenance operations, and InWaTec Combined’s Tubing End Locator (TEL) running services exemplify this precision. Our TEL services provide clients with the certainty needed for depth correlation and critical downhole positioning, ensuring that all subsequent interventions are executed with pinpoint accuracy. The Crucial Role of the Tubing End Locator The TEL is an invaluable tool in the oil and gas industry’s arsenal, designed to accurately locate the end of the tubing string. This precise location is essential for depth correlation during various well servicing operations. InWaTec Combined's TEL services ensure that your team has the exact measurements necessary for efficient and effective intervention planning. Preparation for Precision Before deploying the TEL, it's crucial to ensure the tubing is clear of any debris that could obstruct the locator. InWaTec Combined’s preparatory procedures, which include running a gauge cutter or bailer, are meticulous steps that guarantee the TEL can smoothly navigate to and through the end of the tubing. This thorough clearing is part of our commitment to precision – we ensure that when the TEL is deployed, it operates in an unimpeded environment. Adaptable and Versatile Tooling Our TELs are equipped with a spring-loaded finger, enabling them to be run in various tubing sizes, ranging from 2-3/8? to 5-1/2?. This adaptability makes InWaTec Combined’s TEL services universally applicable, providing versatility without compromising on the accuracy of the tool. Whatever the tubing size, our TEL services can be tailored to meet the specific needs of the operation. Streamlining Operations with Accurate Measurements The accuracy provided by our TEL services streamlines subsequent operations by providing a reliable reference point. This eliminates guesswork, reduces the risk of error, and enhances the efficiency of operations such as setting packers, plugs, or perforating at precise depths. InWaTec Combined’s Promise of Excellence At InWaTec Combined, we understand the impact that accurate depth measurements can have on the success of well operations. Our TEL running services are a reflection of our promise to deliver excellence in every aspect of our work. We provide not just a service, but a partnership that enhances and ensures the precision of your well servicing tasks. Conclusion: Your Partner in Depth Correlation In conclusion, InWaTec Combined’s Tubing End Locator services are crucial for any operation that demands exact depth measurements. With our state-of-the-art tools and meticulous preparation, we ensure that every intervention is carried out with the confidence that comes from knowing the exact parameters of your well. Partner with InWaTec Combined, where precision is not just a metric; it's a mission.

Rental

In Stock

Product

New

API

Land Freight


Mobile Gas Troubleshooting

Gas Expertise

Responsive Mobile Gas Troubleshooting: We're Here to Be Part of the Solution Have you ever experienced the frustration of needing help but struggling to get through to anyone? Or perhaps you've encountered resistance when requesting changes to your work plan due to unexpected circumstances. At Lovat Gas Solutions, we understand that as a service-oriented company, our role is to respond to your evolving needs and be an integral part of the solution, rather than a source of more problems. We are committed to providing responsive mobile gas troubleshooting services that address your challenges and keep your operations running smoothly. When you choose Lovat Gas Solutions, you can expect: 1. Responsiveness: We recognize the importance of timely support. Our team is dedicated to being available and responsive when you need us the most. Whether it's troubleshooting a gas-related issue or making adjustments to your work plan, we are committed to addressing your concerns promptly and efficiently. 2. Collaboration: We believe in working closely with our clients to understand their unique needs and challenges. Our collaborative approach allows us to identify the most effective solutions and provide the support you require. We are here to listen, adapt, and work together to overcome any obstacles that may arise. 3. Problem Solvers: Our team of experts is well-equipped to tackle a wide range of gas-related issues. With our extensive knowledge and experience, we can troubleshoot problems and offer practical solutions that align with your goals. Count on us to be proactive problem solvers who are dedicated to finding the best outcome for your business. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We strive to exceed your expectations by delivering exceptional service and ensuring that we not only meet your immediate needs but also contribute to your long-term success. Your trust and satisfaction are the driving forces behind everything we do. Choose Lovat Gas Solutions as your partner for responsive mobile gas troubleshooting. Experience the difference of working with a company that is committed to being there for you, supporting your needs, and providing effective solutions. Contact us today, and let us be part of the solution to your gas-related challenges. Together, we will overcome obstacles and ensure the smooth operation of your business with Lovat Gas Solutions.

Service

In Stock

Service

New

ISO

Land Freight


Modems Leasing

Supercharge Your Business with Leased Modems from CWB National Leasing Are you ready to propel your business to new heights and boost your profits? Look no further because CWB National Leasing is your partner in success when it comes to leasing modems. Here's why choosing us is the smart move for business owners like you: Get Your Equipment Fast In the fast-paced world of business, time is of the essence. At CWB National Leasing, we understand that, and we've designed our process to be lightning-fast. When you apply for a modem lease, we don't keep you waiting. In fact, we pride ourselves on delivering a quick decision on your lease application. How quick, you ask? We typically notify your chosen equipment dealer that payment is on its way within just 48 hours of your approval. So, while you focus on running your business, you can trust us to handle the logistics and have your modem equipment delivered promptly. Check out our approval turnaround times to witness our commitment to speed and efficiency. Increase Your Buying Power Your buying power is a valuable asset, and we're here to help you leverage it to the fullest. Instead of making a significant upfront purchase, consider the advantages of periodic lease payments offered by CWB National Leasing. By choosing leasing, you can free up crucial cash resources that can be invested in other critical areas of your business. But that's not all—we go a step further by allowing you to add extra features or accessories to your modem equipment for a minor payment increase. That's right; we put the "POW" in Buying Power, giving you the flexibility to customize your equipment to suit your unique needs. Control Your Cash Flow Managing cash flow effectively is essential for any successful business. When you lease modems with CWB National Leasing, you gain a powerful tool to achieve this control. Our lease agreements are structured to ensure small and manageable payments throughout the term of your lease. What does this mean for you? It means that while you pay off your modem equipment, it will start generating revenue for your business. This approach makes it easy to strike the right balance between expenses and revenue, putting you in control of your financial success. Seasonal Payment Options We understand that businesses often experience seasonal variations in revenue. At CWB National Leasing, we're all about flexibility. Our leasing solutions are designed to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to align seamlessly with your revenue patterns. With CWB National Leasing, your modem lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing modems through CWB National Leasing isn't just financially savvy; it can also offer potential tax benefits for your business. In many cases, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully grasp how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will help you navigate the tax advantages of leasing modems with confidence. In conclusion, leasing modems with CWB National Leasing is the strategic choice for business owners who are serious about success. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't miss the opportunity to supercharge your business; choose CWB National Leasing for all your modem leasing needs today!

Service

In Stock

Service

New

ISO


Special Function Pulling Tools

Downhole Tools

Elevate Downhole Operations with HOCA Oil Tools' Special Function Pulling Tools In the rapidly evolving landscape of oil and gas extraction, the right downhole tools can be the key to operational success and efficiency. HOCA Oil Tools understands this imperative and responds with our line of Special Function Pulling Tools, engineered to meet the unique challenges faced during downhole operations. Our specialized tools are designed not just to meet but to exceed the demands of modern well interventions, ensuring that every operation is as seamless and efficient as possible. HOCA’s Special Function Pulling Tools: Tailored Solutions for Unique Downhole Challenges Our Special Function Pulling Tools encompass a variety of designs, each tailored to address specific downhole needs and challenges. Whether it's retrieving stuck equipment, deploying complex assemblies, or performing precision interventions, our tools are crafted to provide solutions that enhance operational outcomes. Made with the highest quality materials and precision engineering, HOCA’s Special Function Pulling Tools are the embodiment of our commitment to innovation, quality, and reliability. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are not just suppliers; we are partners in your downhole success. Our Special Function Pulling Tools are a testament to our dedication to advancing downhole operations through innovative solutions. By choosing our specialized tools, you are not only equipping your operations with top-tier downhole technology but also aligning with a partner dedicated to providing exceptional service and support. Incorporating HOCA’s Special Function Pulling Tools into your downhole operations is a step towards enhanced efficiency, safety, and cost-effectiveness. Our commitment to quality and innovation ensures that our tools stand up to the challenges of the oilfield, driving your operations to new heights of success. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who depend on our Special Function Pulling Tools for their unique operational challenges. Elevate your downhole operations with HOCA Oil Tools – where exceptional quality meets innovative solutions.

Buy

In Stock

Product & Service

New

API

Air Freight


Control Room Wireless Links

Amplifying Control Room Capabilities through Robust Wireless Links by Nulux Network Solutions In the thriving pulse of the oil and gas industry, where operational precision and data integrity are pivotal, control rooms emerge as the neural centers orchestrating myriad operations with absolute finesse. At Nulux Network Solutions, we understand the paramount importance of seamless, secure, and robust communication for control rooms, ensuring that your operational harmony remains undisturbed amidst the cacophony of challenges posed by distance, terrain, and environmental factors. Nulux’s Control Room Wireless Links – Ensuring Uninterrupted Operative Symphonies Navigating through the technological and operational challenges, Nulux’s Control Room Wireless Links ensure that your data – the critical nerve of decision-making processes – travels seamlessly across the challenging terrains and distances, bridging your control room with the various operational nodes dispersed across diverse geographic locales. Wireless Connectivity – The Nulux Difference Our wireless solutions are meticulously crafted, ensuring: Seamless Connectivity: Bridging the communication gaps through point-to-point and multipoint configurations, tailored to meet your unique operational dynamics and challenges. Enhanced Reliability: With proven expertise in implementing robust wireless systems, we ensure that your control room is always in sync with the on-field operations, mitigating downtimes and enhancing decision-making processes. Optimized Cost-Effectiveness: Deploying wireless links that negate the need for extensive hardwired infrastructures, thereby ensuring that your operational efficiencies are not burdened by exorbitant capital expenditures. Intricate Comprehension of Wireless Technologies At Nulux, we prioritize understanding the subtle nuances and stark distinctions in wireless technologies, ensuring that your control room wireless links are not just communicatively optimal but are also operationally coherent. Point-to-Point Networks: Ensuring a dedicated, secure, and high-capacity data transmission channel between your control room and a fixed operational point. Multipoint Configurations: Crafting a network where the control room can communicate with multiple operational points through a single, secure, and reliable wireless channel. Safeguarding Your Data with Nulux In a world where data integrity and security are not mere necessities but vital operational prerequisites, our Control Room Wireless Links are fortified with robust security protocols, ensuring that your operational data is shielded from potential cyber threats, thereby facilitating a secure, reliable, and efficient operative environment. Engage with Operational Excellence Embark on a journey towards enhanced operational efficiencies with Nulux, where your control room is not just a strategic point but is the dynamic conductor of an orchestrated operational symphony. Our wireless links ensure that every note, every data point, is communicated, analyzed, and acted upon with absolute precision, ensuring that your operations resonate with reliability, efficiency, and absolute excellence. Unleash the true potential of your control room, ensuring that every decision, every action is backed by real-time data, secured communication, and the robust reliability of Nulux’s Control Room Wireless Links. Let’s sculpt an operational future where your decisions echo across the vast expanses of your operations, where your actions are timely, and where your control room truly controls, manages, and orchestrates your operational symphony with unmatched precision and reliability. Navigate with Nulux, where your pathways are not just connected but are securely, reliably, and efficiently interlinked.

Service

In Stock

Service

New

ISO


Thru-Tubing MatrixStixx 2.25 inch

StimStixx 2.25 inch MatrixStixx

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionize Your Operations! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! StimStixx Technologies is proud to present our cutting-edge Thru-Tubing Acid Stimulation system, designed to meet all your needs with ease and precision. Our innovative product offers a hassle-free deployment process via electric wireline, ensuring a seamless integration into your operations. Available in both HCL and HCL/HF acid blends, our solution guarantees the utmost effectiveness in achieving your desired results. At the heart of our Thru-Tubing Acid Stimulation system lies a specially formulated solid acid stick. Whether you're using slickline, wireline, coil tubing, or tractor-conveyed methods, our solid acid stick delivers heated acid vapor with pinpoint accuracy directly to the zone of interest. This groundbreaking approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the heated acid vapor. Not only does our system deliver exceptional performance, but it also provides numerous benefits that will enhance your operations in more ways than one. By utilizing our Thru-Tubing Acid Stimulation, you'll experience reduced CO2 emissions, lower downtime, and simplified implementation. The increased precision and fast-acting nature of our solution will save you valuable time and resources, while also reducing manpower, rig, and equipment costs. Additionally, the elimination of contaminated effluent means a reduced risk of spills at the surface and eliminates the need for post-treatment clean-up or disposal. Join the countless businesses already benefiting from our Thru-Tubing Acid Stimulation system. Embrace efficiency, precision, and environmental responsibility with StimStixx Technologies. Contact us today to revolutionize your operations and unlock a new level of success!

Buy

In Stock

Product & Service

New

API

Air Freight


Subsea Transformer for ROV

ROV Transformer

Poseidon Robotics Introduces the Subsea Transformer: Taking Telemetry to New Depths In our unwavering commitment to advancing subsea robotics and ROV technology, Poseidon Robotics is thrilled to introduce our latest breakthrough: the Subsea Transformer. As part of our renowned Modular Telemetry System, this innovative subsea transformer assembly is set to redefine the capabilities of telemetry in deep-water operations. Unlocking New Possibilities At Poseidon Robotics, we understand the unique challenges faced by subsea professionals, and we continuously strive to provide solutions that exceed expectations. The Subsea Transformer is a testament to this dedication, offering a seamless integration of state-of-the-art components to empower your subsea missions. High Voltage Meets High Performance Designed with precision engineering and utilizing cutting-edge technology, our Subsea Transformer boasts a 3kV input and delivers an impressive 240VAC + HV motor output. This combination of high voltage and performance ensures efficient and reliable power distribution for your critical subsea operations. MacArtney Opto-Link Connectors The Subsea Transformer is equipped with MacArtney Opto-Link connectors, renowned for their robustness and reliability. These connectors ensure secure data transmission, minimizing the risk of signal loss and maintaining a seamless flow of information between your subsea equipment and surface systems. CWDM Technology To further optimize data transmission and maximize the potential of your subsea operations, our Subsea Transformer incorporates Coarse Wavelength Division Multiplexing (CWDM) technology. By enabling multiple signals to be transmitted over a single fiber optic cable, CWDM enhances the efficiency of your telemetry system, reducing cable requirements and streamlining your subsea setup. Unparalleled Integration The Subsea Transformer assembly is engineered to seamlessly integrate with our Modular Telemetry System, forming a powerful combination that is greater than the sum of its parts. This integration empowers you with a comprehensive telemetry solution, allowing you to focus on your subsea objectives without the distractions of technical complexities. Reliability and Performance You Can Trust When it comes to subsea operations, reliability is paramount. Poseidon Robotics has meticulously tested and validated the Subsea Transformer to ensure it performs flawlessly even in the harshest subsea environments. With our product, you can trust that your telemetry system will operate at peak performance, unleashing new possibilities for your subsea endeavors. Elevate Your Subsea Missions with Poseidon Robotics Discover a new era of subsea telemetry capabilities with Poseidon Robotics' Subsea Transformer. Whether you are exploring the depths of the ocean or conducting critical subsea inspections, our solution is here to support and enhance your operations. Contact Us Today To learn more about the Subsea Transformer and how it can elevate your subsea missions, contact Poseidon Robotics today. Our team of experts is eager to collaborate with you in shaping the future of subsea robotics and ROV technology. Embrace the power of innovation with Poseidon Robotics!

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Tubing Mandrel Running Tool

Downhole Tools

Unlock Enhanced Efficiency and Safety with HOCA Oil Tools' Tubing Mandrel Running Tools In the challenging arena of oil and gas extraction, the significance of reliable, efficient, and precise tools is undeniable. HOCA Oil Tools, renowned for its commitment to innovation and quality, introduces its Tubing Mandrel Running Tools, designed to streamline and secure downhole operations. Our products stand as a testament to our dedication to advancing the oilfield industry's capabilities, offering unparalleled solutions to common downhole challenges. HOCA’s Tubing Mandrel Running Tools: Precision Engineered for Superior Performance HOCA Oil Tools’ Tubing Mandrel Running Tools are meticulously crafted to ensure the safe, efficient, and precise deployment of tubing mandrels within the wellbore. These tools are vital for maintaining the integrity and functionality of the tubing string, playing a crucial role in various downhole operations from completion to intervention. Built from high-grade materials and engineered to withstand demanding downhole conditions, our Tubing Mandrel Running Tools represent the pinnacle of downhole innovation. Experience the HOCA Oil Tools Advantage At HOCA Oil Tools, we understand the complexities of downhole operations and the importance of reliable tools in achieving successful outcomes. Our Tubing Mandrel Running Tools are a reflection of this understanding, offering solutions that enhance efficiency, safety, and cost-effectiveness. Incorporating our Tubing Mandrel Running Tools into your downhole operations not only signifies a commitment to operational excellence but also aligns your projects with the industry's highest standards. With HOCA Oil Tools, you gain more than just a supplier; you gain a dedicated partner committed to your success. Choose HOCA Oil Tools for your Tubing Mandrel Running Tools and experience the difference that quality, innovation, and dedicated support can make in your downhole operations. Elevate your wellbore activities with HOCA Oil Tools – where technology meets tradition in the pursuit of downhole excellence.

Buy

In Stock

Product & Service

New

API

Air Freight


Nearshore Development

Software Development

Eleks in Toronto

Meer informatie

ELEKS: Your Ultimate Nearshore Software Development Partner Unlock the potential of nearshore software development with ELEKS – your gateway to building top-tier technology solutions across borders. With 11 delivery centers spanning 8 countries, we offer you a seamless collaboration experience that transcends geographical barriers and propels your projects to new heights. ELEKS Nearshore Software Development: The Future of Collaboration Time Zone and Geographical Alignment: Experience a level of synchronicity that offshore development can't provide. ELEKS nearshore software development ensures smooth communication, collaboration, and project delivery. Our nearshore advantage means regular onsite visits and a working partnership that's as cohesive as it is efficient. Unified Cultural Approach: Integration goes beyond technology – it's about embracing culture. Our experts seamlessly blend with your in-house team, adopting your unique ethos. Beyond that, we transfer vital process and behavior-change knowledge, ensuring a truly unified and synergistic approach. Faster Product Launch: Elevate your go-to-market strategy with ELEKS as your nearshore development partner. Our streamlined processes and collaborative approach mean you can launch your product twice as fast. Time is of the essence in today's dynamic market – we help you seize it. Superior Quality of Work: Satisfaction is not a target; it's a standard. At ELEKS, we never rest until you're completely satisfied. Our unmatched client satisfaction rating of 97% speaks volumes about our commitment to excellence. Trust us to deliver top-notch results. Access to Top Talent: ELEKS' talent pool boasts 2000+ multi-skilled specialists rooted in math and physics. This means you can assemble the perfect team to bring your vision to life. The right talent is the foundation of success – with us, it's a given. Dedicated Team: Complexity meets capability with our dedicated teams. We handpick specialists with tailored skills to flawlessly execute your software vision. No matter how intricate your project, our experts are up to the task. ELEKS Global Presence: Spanning 18 locations across three continents, ELEKS ensures swift and streamlined communication. With us, you'll experience the efficiency and cost-saving benefits of offshore development coupled with accessible, onsite collaboration. ELEKS Nearshore Software Development: Where Innovation Meets Excellence Our Nearshore Software Development Services: Our portfolio is a testament to three decades of innovation and expertise. With a wide range of market-leading software and consultancy services, we cater to global clients with diverse needs. What Sets ELEKS Apart? • Nearly three decades of custom software development excellence • Extensive technology consulting prowess • Deep strategic product design proficiency with a UX-certified team • One of Ukraine's largest data science teams • Mitigate investment risk with MVP development • Trailblazing technological innovation through our in-house R&D lab Nearshore vs. Offshore vs. Onshore: A Winning Formula with ELEKS When scaling or upskilling is the name of the game, onshore development can be effective but pricey. Offshore options save you time and money, but often come with control trade-offs. ELEKS introduces the winning formula: nearshore development. It blends cost efficiency with quality, offering streamlined communication and onsite visits without compromising savings. ELEKS Nearshore Software Development: Your Bridge to Innovation Experience the best of both worlds – a nearshore team that combines accessibility with efficiency. ELEKS empowers you to transcend borders, embrace innovation, and redefine success. With us, your nearshore journey is a step towards a more collaborative and prosperous future.

Service

In Stock

Service

New

ISO


HDI 2100 Pump Stroke Counter System

Pump Stroke Counter

When it comes to accurate and reliable monitoring of mud pumps, the HDI 2100 Pump Stroke Counter stands as the industry's leading solution. Designed as an intrinsically safe, certified, solid-state electronic stroke counter, the HDI 2100 ensures precise tracking and display of total accumulated mud pump strokes and stroke rates. Seamless Integration with the HDI 9000 Choke Console System: The HDI 2100 is most commonly found within the HDI 9000 Choke Console System, where it plays a vital role in monitoring and displaying the stroke data of up to four individual mud pumps simultaneously. With its advanced capabilities, this stroke counter provides real-time insights into pump performance, enabling operators to make informed decisions for efficient drilling operations. Uncompromising Precision and Reliability: Equipped with a quartz crystal oscillator, the HDI 2100 delivers high-precision stroke counts with zero drift. This ensures accurate and reliable measurement, even in harsh environments and high vibration conditions encountered in land and offshore drilling. Constructed with a stainless steel case and stainless steel piezo switches, the HDI 2100 is built to withstand the toughest conditions for long-lasting performance. User-Friendly and Low Maintenance: Once installed, the HDI 2100 requires virtually no maintenance or calibration, allowing you to focus on your operations with confidence. The solid-state display provides clear and reliable information, while the simple interface allows for easy calibration when needed. Battery-powered operation ensures portability and convenience, while a low battery indicator keeps you informed about power levels. Versatile Configuration Options: The HDI 2100 offers various configuration options to suit your specific needs. You can choose between micro-switch or proximity sensor inputs, depending on your preference and operational requirements. Dual sensors are also available for seamless integration with HMI/PLC systems, enhancing the automation capabilities of your drilling processes. Certifications You Can Trust: The HDI 2100 Pump Stroke Counter is CSA certified as Intrinsically Safe Class 1, Division 1, Groups A, B, C, and D. Additionally, an optional ATEX certification (II 1 G, Ex ia IIC T4) is available for enhanced safety in hazardous environments. Experience the HDI Advantage: With the HDI 2100 Pump Stroke Counter, you gain access to unrivaled accuracy, reliability, and ease of use. Our commitment to excellence ensures that all HDI Gauges provide safety, accuracy, reliability, and low maintenance for our valued customers. Contact our experienced team today to discuss your specific monitoring requirements and discover how the HDI 2100 can revolutionize your mud pump operations. Trust Houston Digital Instruments for the ultimate monitoring solution. Where Safety Meets Performance - HDI, your partner in precision measurement.

Buy

In Stock

Manufacturer

New

API

Air Freight


GPS Leasing

Lease GPS Systems with CWB National Leasing: The Road to Business Success In today's fast-paced business landscape, staying ahead of the competition requires efficiency, flexibility, and smart financial decisions. One way savvy business owners are achieving this is by leasing GPS systems through CWB National Leasing. If you're ready to supercharge your business and increase your profits, you've come to the right place. Here's why you should consider leasing GPS systems with us: Get Your Equipment Fast Time is of the essence in business, and we understand that. When you choose to lease GPS systems with CWB National Leasing, you can expect a lightning-fast process. We'll review your application promptly and provide a decision on your lease within 48 hours of your approval. That's right; in just two days, you'll have the green light to acquire the GPS equipment you need. Once approved, we'll notify your chosen equipment dealer, and you can sit back and wait for the delivery of your equipment. Our commitment to swift service ensures that you can start using your GPS systems without unnecessary delays. Increase Buying Power Leveraging your buying power is a key advantage of leasing GPS systems. Rather than making a substantial upfront purchase, you can free up cash by opting for periodic lease payments. This approach allows you to allocate your capital to other critical areas of your business. What's more, with CWB National Leasing, you have the option to add extra features or accessories to your GPS equipment for a small payment increase. It's a strategic way to customize your equipment to meet your specific needs without breaking the bank. With our leasing solutions, you'll truly put the "POW" in buying power! Control Your Cash Flow Effective cash flow management is essential for any business. When you choose to lease GPS systems, you'll benefit from small, manageable payments spread over the lease term. This means your equipment will begin earning you money while you pay it off. The ability to align your expenses with revenue generation makes it easy to maintain a healthy expense-to-revenue ratio. It's a smart financial strategy that allows you to stay in control of your cash flow while reaping the benefits of GPS technology. Seasonal Payment Options At CWB National Leasing, we understand that every business has unique financial cycles. That's why we're all about flexibility. Our leasing solutions are designed to match your revenue patterns. Whether you prefer seasonal, semi-annual, or annual payments, we can structure your lease to align with your business's cash flow. This tailored approach ensures that your GPS system lease remains convenient and sustainable throughout the year. Potential Tax Savings Leasing GPS systems can offer your business potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax benefits rather than depreciating the capital cost of equipment. To fully understand how leasing can benefit the tax position of your business, we recommend consulting your tax advisor. They can provide insights into the specific advantages that leasing GPS systems can offer your unique financial situation. In conclusion, leasing GPS systems with CWB National Leasing is a strategic decision that can help your business thrive. From fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business for success. Take the road to business success with CWB National Leasing today!

Service

In Stock

Service

New

ISO


Simplified Repatriation of Funds

Personal FX Services

Unlock Financial Freedom with Dunbridge Financial: Simplified Repatriation of Funds Are you an expat looking to make purchases back home or an immigrant wanting to send money to your family? Dunbridge Financial is here to make your financial dreams a reality. With our Personal Services, we offer a seamless and secure way to repatriate funds, ensuring that your hard-earned money reaches its destination with ease. Repatriation of Funds Made Easy Being away from home shouldn't mean being disconnected from your financial commitments and loved ones. At Dunbridge Financial, we understand the importance of staying connected to your roots and supporting your family. Whether you're an expat looking to invest back home or wanting to send financial assistance to your loved ones, our services are designed to cater to your needs. Personal Services for Your Peace of Mind At Dunbridge Financial, we take pride in offering comprehensive Personal Services that cater to your specific financial needs. Here's why our customers choose us: 1. Live Rates with No Hidden Fees Transparency is at the heart of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and be confident that you're getting the most value for your money. 2. Security is Our Priority Your financial security is paramount to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your funds and data are managed safely and securely. Enjoy peace of mind knowing that your financial transactions are in trustworthy hands. 3. Easy to Use, Easy to Save Managing your international transactions should be effortless. With Dunbridge Financial, it is as simple as it gets. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your reliable partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for smooth and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Embrace Financial Freedom Embrace a world of financial freedom with Dunbridge Financial. Sign up now and experience a seamless, worry-free financial journey. If you're repatriating funds as an expat we are here to make your financial aspirations come true. Simplify your repatriation of funds with Dunbridge Financial. Unlock a world of possibilities with ease, convenience, and security. Your financial goals are within reach - join us today and make them a reality.

Service

Made to Order

Service

New

ISO

Air Freight


ATEX Group II, Battery

Battery for Wisdom Lamp 3A

Provix in New Lowell

Meer informatie

Power Your Work with the ATEX Group II Battery – A High-Performance Solution from Provix Provix is proud to present the ATEX Group II Battery (Part # NWI-WLAMP3A-ATEX), a powerful and reliable energy source designed specifically for use in challenging industrial environments. This battery is an ideal choice for professionals who require dependable and long-lasting power for their mining and construction equipment. Exceptional Performance and Durability The ATEX Group II Battery is engineered to deliver outstanding performance. With a capacity of 2*3.5=7.0Ah, it offers a strong and consistent power supply, ensuring your equipment operates at peak efficiency. The battery boasts an impressive 11000 LUX and 240 Lumens, providing bright and clear illumination for a variety of tasks. Extended Runtime for Demanding Workdays One of the key features of this battery is its extended runtime. Capable of running for 13 hours on a single charge, it is perfectly suited for long shifts and continuous use. This extended runtime ensures that your equipment stays operational throughout your workday, minimizing interruptions and maximizing productivity. Compliance with ATEX Safety Standards Safety is paramount in industrial settings, and the ATEX Group II Battery adheres to the highest safety standards. It is specifically designed for use in potentially explosive atmospheres, meeting the rigorous requirements of ATEX Group II certification. This compliance ensures that the battery can be safely used in hazardous environments commonly found in mining and construction sites. Robust Construction for Industrial Use Constructed with durability in mind, the ATEX Group II Battery is built to withstand the tough conditions of industrial work environments. Its robust design ensures it can endure the rigors of daily use, providing reliable performance over time. Ideal for Mining and Construction Professionals Whether you are working in mining, construction, or any other industry where reliable power is crucial, the ATEX Group II Battery is an essential tool. Its combination of high performance, extended runtime, and compliance with safety standards makes it a top choice for professionals. Invest in Reliable Power with Provix Upgrade your equipment with the ATEX Group II Battery from Provix. Visit our website at www.provix.net to learn more about this high-quality battery and explore our wide range of specialized mining and construction equipment. Power your work with the best – choose Provix.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Utility Backup Operators

Operator

Reliable Utility Backup Operators: Trust Lovat Gas Solutions When it comes to utility backup operations, Lovat Gas Solutions stands out as your trusted partner. With over 80 years of combined experience in the industry, our team possesses extensive knowledge and expertise in assisting gas utilities with pipeline outages and redesigning town border stations. We are here to provide you with highly skilled utility backup operators backed by engineers and operations support to meet your short or long-term operational needs. At Lovat Gas Solutions, we understand the criticality of having a reliable and efficient backup operation in place. Our team of utility backup operators is well-trained and equipped with the necessary expertise to seamlessly support your utility or gas operation during emergencies or planned downtime. We ensure that our operators are up to date with all safety training, enabling them to come and provide immediate assistance to your operations when required. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With our extensive experience across Canada, from north to south and east to west, we have a deep understanding of the unique challenges and requirements of utility backup operations. Our team draws upon their years of experience to deliver reliable and effective solutions tailored to your specific needs. 2. Comprehensive Support: Our utility backup operators are backed by a team of engineers and operations support, ensuring a well-rounded approach to addressing your operational manpower needs. We provide a holistic support system that covers all aspects of utility backup operations, from planning to execution. 3. Safety as a Priority: Safety is of utmost importance to us. We prioritize the well-being of our operators and your operational environment. Our utility backup operators undergo rigorous safety training to ensure compliance with industry standards and best practices. 4. Responsive Service: We understand that utility backup operations require quick response and reliable support. Our team is ready to assist you on short notice, ensuring minimal disruption to your operations during emergencies or planned outages. When you choose Lovat Gas Solutions for your utility backup operator needs, you can rest assured that you are partnering with a reliable and experienced company. We are dedicated to providing the highest level of service and support to meet your temporary operational manpower requirements. Contact a Lovat Gas Solutions expert today and let us help you with your utility backup operator needs. With our reliable team, comprehensive support, and commitment to safety, we will ensure a seamless and efficient utility backup operation for your gas utility or operation. Trust Lovat Gas Solutions to be your trusted partner in utility backup operations.

Service

In Stock

Service

Used

API

Land Freight


Tubular Manufacturing Traceability

PipeDNA is a cloud-based pipe management solution

Enhancing Tubular Manufacturing Traceability with PipeDNA: Ensuring Quality and Compliance In the oil and gas industry, maintaining traceability throughout the tubular manufacturing process is crucial for ensuring quality, compliance, and operational efficiency. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage tubular manufacturing traceability, increase visibility, and optimize their operations for enhanced quality control. Comprehensive Inventory Management and Tracking: PipeDNA offers comprehensive inventory management and tracking capabilities for tubular products, enabling stakeholders to have full visibility into their manufacturing processes. From raw materials to finished products, PipeDNA allows for seamless tracking of each component, ensuring accurate inventory control, reducing waste, and optimizing production planning. Gain insights into utilization, activity, and trends, empowering stakeholders to make data-driven decisions and streamline their manufacturing operations. Streamlined Logistics Management: PipeDNA simplifies logistics management by providing stakeholders with a centralized platform to manage shipments, track status, and document crucial information. Whether it's inbound or outbound logistics, PipeDNA ensures seamless coordination and real-time visibility into the movement of tubular products. The platform also facilitates pipe bundling, allowing stakeholders to optimize transportation and storage, reducing costs and improving overall efficiency. Efficient Inspection Management: With PipeDNA's inspection management feature, stakeholders can effectively manage inspection jobs throughout the tubular manufacturing process. From initial inspections of raw materials to final product inspections, PipeDNA enables tracking and monitoring of job status across multiple sites. By streamlining inspection profiles and documentation, stakeholders can ensure compliance with quality standards, reduce errors, and maintain consistent product quality. Automated Tally Operations: PipeDNA simplifies and automates the tallying process during tubular manufacturing. Stakeholders can create and manage tally operations within the platform, eliminating manual calculations and reducing the risk of errors. By automating pipe tally jobs and workflows, PipeDNA saves time, improves accuracy, and enhances overall manufacturing efficiency. Accurate tally operations enable stakeholders to maintain reliable records and ensure traceability throughout the production cycle. Enhanced Identification and Traceability: PipeDNA's identification and traceability features provide stakeholders with quick and accurate pipe identification, detailed pipe information, activity history, and traceability documentation. By integrating popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables seamless identification and tracking of each tubular product. This enhanced traceability minimizes the risk of errors, supports efficient recalls if necessary, and ensures compliance with industry regulations. Designed for the Oil and Gas Industry: PipeDNA was designed specifically for stakeholders across drilling, manufacturing, and oilfield services, catering to their unique needs in tubular manufacturing traceability. Whether you are a drilling contractor, oilfield rental company, oilfield and inspection service provider, steel pipe manufacturer, or pipe distribution and storage provider, PipeDNA offers tailored solutions to streamline your tubular manufacturing processes and drive quality and compliance. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's emerging technologies to optimize tubular manufacturing traceability. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, allowing for efficient barcoding and labeling. Furthermore, PipeDNA is RFID ready, supporting the integration of RFID technologies for accurate asset tracking and improved traceability. The platform also enables IoT data integration using the MQTT standard, facilitating fast and reliable sensor data integration for enhanced decision-making during the manufacturing process. PipeDNA revolutionizes tubular manufacturing traceability in the oil and gas industry, providing a smart cloud-based platform that enhances quality control, compliance, and visibility. With its comprehensive inventory management, streamlined logistics operations, efficient inspection management, automated tally operations, and enhanced identification and traceability features, PipeDNA empowers stakeholders to optimize their tubular manufacturing processes, minimize errors, and ensure compliance with industry standards. Leverage the power of PipeDNA and take your tubular manufacturing traceability to new heights of efficiency and reliability.

Service

Currently in Use

Service

New

API

Air Freight


Thru-Tubing MatrixStixx 2 inch

MatrixStixx 3

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionizing Well Stimulation! Are you looking for a quick, efficient, and environmentally friendly solution for acid stimulation? Look no further! StimStixx Technologies presents Thru-Tubing Acid Stimulation, a game-changing product that will transform the way you approach well treatments. With our Thru-Tubing Acid Stimulation system, deployment has never been easier. Using electric wireline technology, our product offers quick and seamless deployment, saving you valuable time and resources. Whether you prefer HCL or HCL/HF acid blends, we have you covered with our versatile options. What sets our product apart is the utilization of a specially formulated solid acid stick, which can be delivered via slickline, wireline, coil tubing, or tractor conveyance. This solid acid stick releases heated acid vapor with pinpoint accuracy precisely at the zone of interest. The highly reactive nature of the vapor ensures increased penetration and contact with the formation, effectively targeting contaminants and carbonate scale. One of the key advantages of our Thru-Tubing Acid Stimulation is the complete vaporization and spending of the acid down-hole. This eliminates any contaminated effluent, greatly reducing the risk of spills at the surface and eliminating the need for post-treatment clean-up or disposal. Say goodbye to environmental concerns and hello to a greener, safer solution. The benefits of choosing our Thru-Tubing Acid Stimulation are numerous. Firstly, you'll contribute to reducing CO2 emissions, making a positive impact on the environment. Additionally, you'll experience reduced downtime, thanks to the simplicity and efficiency of our implementation process. The increased precision of our system ensures targeted results, allowing you to achieve your desired outcomes with accuracy and reliability. By choosing our product, you'll also enjoy fast-acting results, saving both time and money. Lower manpower, rig, and equipment costs are a reality with StimStixx Technologies. With our Thru-Tubing Acid Stimulation, you can say goodbye to surface spillage and the exposure to hazardous materials. We prioritize safety and efficiency, making your operations smoother and more secure. Join the ranks of industry leaders who have already experienced the benefits of Thru-Tubing Acid Stimulation by StimStixx Technologies. Don't miss out on this opportunity to revolutionize your well stimulation processes. Contact us today and witness the future of well treatments!

Buy

In Stock

Product & Service

New

API

Air Freight


TIG Welder DC 202 Pulse-D

TIG Welding Machine

Experience Precision and Professionalism with the TIG DC 202 Pulse-D Welding Machine At Canaweld, we understand the importance of precision and sleek design in welding, especially for industries like oil and gas, marine, aerospace, and medical. That's why we offer a wide range of TIG welders designed to give you the control necessary to achieve professional results with various parent metals. Our TIG welders are the ultimate choice for welders who demand excellence and quality in their work. Introducing the TIG DC 202 Pulse-D - Your Portable Powerhouse The TIG DC 202 Pulse-D is a welding machine that sets new standards in the industry. Portable, powerful, and versatile, it is the perfect tool for welders seeking exceptional TIG welds on stainless and mild steel or Stick welding. The professional pulse features, combined with HF start, make it an ideal companion for achieving high-quality welds, even on very thin steel, with no distortion. Unmatched Features for Unrivaled Performance At Canaweld, we believe in delivering welding machines that exceed expectations. The TIG DC 202 Pulse-D is packed with features that enhance your welding experience: • High Frequency (HF) for start, ensuring a smooth and efficient start to your welding projects. • Rigorously tested in (104°F/40°C) to guarantee optimal performance even in the toughest conditions. • Digital control of all welding parameters, giving you precise control over your welding process. • Dual control options: Amperage control accessible by both foot pedal and fingertip controls on the torch body, offering convenience and flexibility during welding. • Pulse TIG welding for better arc control and reduced workpiece deformation, resulting in professional welds on thin materials. • Exceptional welding characteristics in Stick mode with the most common rod in the market, adding versatility to your welding tasks. • Long-distance welding capability: Ability to use up to 165 feet (50 meters) leads without any power loss at the welding circuit, giving you freedom of movement on the job. • Digital adjustment of pre-gas, base current, welding current, slope up, pulse parameters, slope down, and post-gas with digital display for precise customization. • Arc Force automatically selects the best welding arc dynamics, optimizing your welding performance. • Visual welding current pre-setting ability for accurate and efficient parameter selection. • Fan cooled and thermally protected against overheating, ensuring durability and safety during operation. • Durable metal face panel, guaranteeing longevity and protection. • Generator compatible, providing versatility and adaptability for various worksites. Your Welding Excellence is Our Priority We take pride in our products, and the TIG DC 202 Pulse-D is no exception. To ensure your satisfaction and confidence in our welding machine, we offer a comprehensive 3-year warranty, protecting your investment and giving you peace of mind. Elevate Your Welding Experience with Canaweld Take control of your welding projects with precision and professionalism. Choose the TIG DC 202 Pulse-D from Canaweld and experience welding excellence like never before. Whether you're in the marine, aerospace, or medical industry, or any other field that demands top-tier welds, this welding machine will deliver unparalleled performance and superior results. Invest in the future of welding technology. Choose Canaweld, and unlock your welding potential with the TIG DC 202 Pulse-D. Experience precision, power, and professionalism in every weld.

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Fiber Optic Splice on Connectors

Solidifying Your Fiber Optic Networks with Nulux’s Splice-On Connectors In the vast and dynamically intricate world of the Oil and Gas industry, where every drop of energy and every byte of data pulsates through extensive networks, ensuring stability, reliability, and durability in communication is pivotal. In this domain of seamless connectivity, Nulux Network Solutions, proudly presents its stellar service of Fiber Optic Splice-On Connectors, a vital link in fortifying and enhancing your fiber optic networks. Unveiling the Potency of Splice-On Connectors Splice-on connectors employ the refined technology of fusion splicing to facilitate the installation of standard fiber optic connectors even amidst the rigors of the field. In essence, they provide exceptionally low-loss terminations, becoming a fundamental component, particularly in sprawling and multifaceted fiber optic networks where every decibel of loss is critical. Not just a technological solution, splice-on connectors, when adeptly utilized in the right environments, endow the network with a termination that is not only highly durable but can also stoically endure the harsh and often unyielding conditions, so synonymous with the oil and gas sector. Nulux’s Splice-On Connectors: A Synthesis of Technology and Reliability Nulux Network Solutions, steeped in its unwavering commitment to providing products, solutions, and services across the entirety of the energy value chain, seeks to uplift and support the Oil and Gas sector by ensuring that every bit of your data, every communication, is transmitted with absolute integrity. Choosing Nulux for your Fiber Optic Splice-On Connectors means: Embarking on Sustainable Connectivity: Our services go beyond mere installations and solutions; we are your partners in charting a course towards a sustainable future, ensuring that every connection, every splice, is a step towards enhanced operational and environmental efficacy. Optimizing Network Performance: Our splice-on connectors, renowned for their low-loss terminations, ensure that your complex networks are bolstered with optimal performance, minimizing loss and maximizing data transmission integrity. Enduring Harsh Realities: The rugged durability of our splice-on connectors assures that even amidst the most austere and challenging conditions, your terminations remain steadfast, ensuring continuous, unimpeded connectivity. Forge Ahead with Confident Connectivity In an industry where data and communication flow with an undercurrent of criticality akin to the resources being extracted, processed, and transmitted, Nulux Network Solutions stands as a beacon of reliable, sustainable, and superior quality connectivity solutions. Join us in a journey where every splice is a testament to robust, unyielding, and impeccable connectivity, ensuring that every bit of data courses through your networks with precision and reliability, even in the most stringent of environments. Navigate through the pulsating veins of your operations with Nulux’s Fiber Optic Splice-On Connectors – because when it comes to connecting the vital lifelines of your operations, we ensure that every connection counts.

Service

In Stock

Service

New

ISO


Surveying tools Leasing

Enhance Your Precision with Surveying Tool Leasing from CWB National Leasing Streamlining Your Surveying and Mapping Operations with Cost-Effective Leasing Solutions For businesses in construction, land surveying, architecture, and civil engineering, high-quality surveying tools are essential for accurate measurements and efficient project execution. Leasing surveying tools through Canadian Western Bank (CWB) National Leasing offers a smart, adaptable, and financially astute solution. Here’s how leasing surveying tools can significantly benefit your business: 1. Fast Access to Advanced Surveying Equipment CWB National Leasing understands the need for timely access to precision equipment. They offer a rapid leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround ensures that your surveying tools are delivered and ready for use promptly, enhancing your operational efficiency and project timelines. 2. Enhanced Financial Flexibility Leasing surveying tools with CWB National Leasing increases your buying power. It allows you to spread the cost over periodic payments rather than committing to a large upfront purchase, freeing up capital for other essential aspects of your business. The option to add extra features or accessories to your surveying tools for a small payment increase also allows for customization to meet your specific project needs. 3. Balanced Cash Flow Management Smaller lease payments over the term allow your surveying tools to start contributing to your business’s revenue while still being paid off. This approach helps maintain a healthy balance between expenses and income, which is crucial for business growth and financial stability. 4. Flexible Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal or variable income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing surveying tools can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can optimize your business’s tax position. Conclusion Opting to lease surveying tools through CWB National Leasing is a strategic decision that equips your business with essential precision instruments while maintaining financial agility. It ensures access to state-of-the-art surveying equipment, vital for accurate and efficient project execution, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational capabilities, increased accuracy in projects, and greater profitability, helping your business to excel in its respective field.

Service

In Stock

Service

New

ISO


3-1/2 inch K Storm Choke

K Ambient Valve

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


Bomb Hanger Running Tool

Downhole Tools

Elevate Your Downhole Operations with HOCA Oil Tools' Bomb Hanger Running Tools In the intricate and demanding environment of downhole operations within the oil and gas industry, precision, reliability, and safety are paramount. HOCA Oil Tools, a leader in innovative downhole slick line tools, presents its Bomb Hanger Running Tools, specifically designed to enhance the deployment and retrieval of downhole gauges and instruments, commonly referred to as "bombs" in the industry. These specialized tools are critical for ensuring the accurate collection of downhole data, a vital aspect of well diagnostics and optimization. HOCA's Bomb Hanger Running Tools: Precision at Every Depth The Bomb Hanger Running Tools from HOCA Oil Tools are engineered to facilitate the secure placement and retrieval of downhole pressure and temperature recording devices. Designed with precision and manufactured from high-grade materials, these tools stand up to the rigors of the downhole environment, ensuring that critical data collection devices are accurately positioned within the wellbore for optimal performance and data integrity. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are dedicated to advancing the capabilities of the oil and gas industry through our innovative and reliable downhole solutions. Our Bomb Hanger Running Tools epitomize this dedication, offering a solution that not only meets but exceeds the demanding requirements of modern well diagnostics. Incorporating our Bomb Hanger Running Tools into your downhole toolkit is a step towards enhanced operational efficiency, accuracy, and safety. With HOCA Oil Tools, you gain more than a product; you acquire a partner committed to your success, providing advanced solutions and expert service tailored to your unique downhole challenges. Choose HOCA Oil Tools for your Bomb Hanger Running Tool needs and elevate your downhole operations to new levels of efficiency and accuracy. Partner with us and unlock the full potential of your well diagnostics and optimization efforts. With HOCA Oil Tools, you're investing in more than just equipment; you're investing in the future of your downhole operations.

Buy

In Stock

Product & Service

New

API

Air Freight


Hydrogen Solutions

Hydrogen

Unlocking the Power of Hydrogen with Lovat Gas Solutions Methane, the cleanest burning hydrocarbon, holds immense potential for fueling the future. By removing the carbon component, we are left with hydrogen, a clean and renewable source of power. Lovat Gas Solutions understands the transformative power of hydrogen and is here to assist you in realizing the full potential of this remarkable energy source. As a forward-thinking company, we recognize that hydrogen is the fuel of the future. When hydrogen is reacted in a fuel cell, it generates clean power, emitting only water vapor as a byproduct. This makes hydrogen a game-changer in the quest for sustainable and environmentally-friendly energy solutions. Our team of experts at Lovat Gas Solutions is well-versed in the hydrogen sector, equipped with over 80 years of combined experience in compressed gases. We have the knowledge, skills, and dedication to assist you in your hydrogen projects, no matter the scale or complexity. Whether you require hydrogen tube trailers to support fuel cell vehicle demonstrations or other hydrogen-related initiatives, our team is ready to provide the solutions you need. We understand the unique requirements of the hydrogen industry and can guide you through the process, ensuring seamless and efficient hydrogen supply for your projects. Why choose Lovat Gas Solutions for your mobile hydrogen supply needs? 1. Expertise in Compressed Gases: With our extensive experience in compressed gases, we possess a deep understanding of the technicalities and intricacies involved in hydrogen supply. Our team has specific expertise in the hydrogen sector, allowing us to provide tailored solutions for your unique requirements. 2. Commitment to Clean Energy: We share your passion for clean and sustainable energy solutions. By harnessing the power of hydrogen, we aim to contribute to a greener future. Let us assist you in leveraging the immense potential of hydrogen for your projects. 3. Reliable Support: Our team of experts is dedicated to providing reliable support throughout your hydrogen project. We are committed to understanding your specific needs and delivering comprehensive solutions that meet your objectives, ensuring a seamless and successful experience. 4. Collaborative Approach: At Lovat Gas Solutions, we value collaboration and partnership. We believe in working closely with our clients, understanding their goals and challenges, and developing tailored solutions that drive their success. Your satisfaction is our top priority. Embrace the future of clean energy with Lovat Gas Solutions. Contact our experts today to discuss your mobile hydrogen supply needs and how we can assist you in realizing the full potential of this transformative fuel. Together, let's power a sustainable future with hydrogen.

Buy

In Stock

Product & Service

New

ANSI

Land Freight


5 inch K Storm Choke

Ambient 5 inch SSSV

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Air Freight


Equipped Containers

Shipping Container Offices

Introducing Sivam's modified shipping containers - the perfect solution for anyone in need of a portable, efficient, and reliable office space that stands out from the crowd! Our secure modular offices are not your average office space - they're built from durable shipping containers that are modified to suit your needs. Whether you're looking for a portable site office or a unique office space that sets your business apart, Sivam's modified shipping containers are the perfect choice. Thanks to their portable design, our shipping container offices can be easily moved from site to site, giving you the flexibility to set up your office wherever you need it. And with our commitment to efficiency, you can trust that our offices are designed to maximize productivity and minimize wasted space. But don't let their unique design fool you - our shipping container offices are also incredibly secure. We understand the importance of protecting your valuable assets, which is why we build our offices to the highest security standards, giving you peace of mind that your equipment and documents are safe and secure. At Sivam, we pride ourselves on our commitment to quality and customer satisfaction. That's why we work closely with our clients to design and build offices that meet their exact needs, ensuring that every detail is taken care of. So if you're in need of a portable, efficient, and reliable office space that sets your business apart, choose Sivam's modified shipping containers. Contact us today to learn more about how we can help you take your business to the next level!

Buy

In Stock

Manufacturer

New

ISO

Sea Freight


HD-Long 14’-8” Continuous

Safe-T-Whip Continuous

Introducing Safe-T-Whip™ Continuous HD-Long 14’-8” (SW-HD-04-L): Unmatched Safety for Heavy Duty Long Restraint Applications At Safe-T-Whip & Restraints Inc., safety is at the core of everything we do. We are thrilled to present our latest breakthrough - the Safe-T-Whip™ Continuous HD-Long 14’-8”. Specially designed for heavy-duty applications that require a longer restraint, this safety whip offers unparalleled protection and reliability for pressurized pipe fittings in the oilfield. Unparalleled Heavy Duty Design: Distinguished by its striking red color and proudly adorned with a red tag, SW-HD-04-L Safe-T-Whip™ Continuous HD-Long 14’-8” is crafted with precision from robust 3/4" 12-Strand HMPE fiber. This heavy-duty safety restraint is engineered for use on 3-inch 1502 hammer union pipelines up to an impressive 15,000psi or 4-inch iron up to 10,000psi. When you need a longer restraint for heavy-duty applications, trust Safe-T-Whip™ Continuous HD-Long 14’-8” to deliver. Enhancing Safety with Continuous Restraints: The Safe-T-Whip™ Continuous HD-Long 14’-8” is an essential component of our safety restraint system, designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, mitigating dangerous impacts. Engineered for Maximum Protection: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, swivels, and joints. Each section is secured by both the upstream and downstream sections of the flowline, ensuring comprehensive protection in the event of failure. Proper evaluation of the piping system is crucial to ensure adequate anchoring both upstream and downstream, enhancing safety. Certified for Uncompromising Quality: Safety is our highest priority, and that's why all Safe-T-Whip™ Restraints and Anchors undergo rigorous testing and certification to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatility and Flexibility: The Safe-T-Whip™ Continuous HD-Long 14’-8” is designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. Its versatility makes it ideal for various flowline configurations, ensuring superior protection for your heavy-duty operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous HD-Long 14’-8” is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous HD-Long 14’-8”, you can rest assured that your heavy-duty operations are safeguarded from catastrophic failures. The Ultimate Heavy Duty Safety Restraint: SW-HD-04-L Safe-T-Whip™ Continuous HD-Long 14’-8” is the ultimate safety restraint for heavy-duty long applications. Keep your operations safe with Safe-T-Whip & Restraints Inc., your trusted partner in safety.

Buy

In Stock

Product & Service

New

API

Air Freight


X-over Protector

Single completion crossover type

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Buy

In Stock

New

New

API

Air Freight


NIU - Pipe Inspection ROV

Pipe Inspection ROV

Introducing the NIU ROV: Your Ultimate Pipe Inspection Solution Poseidon Robotics is thrilled to unveil the latest addition to our fleet of advanced subsea robotics: The NIU ROV - The Pipe Inspection Remote Operated Vehicle. Engineered to excel in pipe and tunnel inspections, the NIU ROV sets new standards for versatility, precision, and efficiency in the subsea industry. Unleash the Power of NIU ROV The NIU ROV is purpose-built to navigate the intricate and challenging environments of pipes and tunnels. With its compact design, this remarkable ROV can effortlessly maneuver through a 12-inch diameter pipe, providing unparalleled access to previously hard-to-reach areas. From industrial pipelines to underwater tunnels, the NIU ROV is your go-to solution for comprehensive inspections. Unparalleled Performance The NIU ROV is equipped with state-of-the-art technology and robust features that ensure exceptional performance in every operation. Its advanced thrusters enable precise movement and control, allowing operators to conduct inspections with utmost accuracy. The powerful onboard lighting system ensures crystal-clear visibility even in the darkest and murkiest conditions. Efficiency Redefined At Poseidon Robotics, we understand the value of time and efficiency in subsea operations. The NIU ROV is designed to streamline your inspection processes, significantly reducing downtime and operational costs. Its ease of deployment and user-friendly interface enable quick setup and seamless integration into your inspection workflows. Tailored for Pipe and Tunnel Inspections Unlike generic ROVs, the NIU ROV is engineered specifically for the unique challenges of pipe and tunnel inspections. Its rugged construction and protective measures safeguard it from potential hazards encountered in these confined environments. With the NIU ROV, you can confidently conduct inspections with minimal risk and maximum efficiency. Cutting-Edge Technology The NIU ROV incorporates cutting-edge technology, including high-resolution cameras, to provide a comprehensive view of the inspection area. Its real-time data transmission capabilities allow operators to monitor and analyze data on the surface, making informed decisions on the spot. Unlock New Possibilities with NIU ROV From oil and gas pipelines to municipal infrastructure, the NIU ROV opens up a world of possibilities for inspecting critical subsea assets. Its adaptability and versatility make it an indispensable tool for various industries, including energy, construction, engineering, and more. Partner with Poseidon Robotics When you choose the NIU ROV from Poseidon Robotics, you not only invest in a top-of-the-line inspection solution but also gain access to our unmatched expertise and support. Our team of subsea specialists is ready to assist you every step of the way, ensuring that you harness the full potential of our advanced ROV technology. Embark on a New Era of Pipe Inspections Step into the future of subsea inspections with the NIU ROV - The Pipe Inspection Remote Operated Vehicle. Experience unparalleled performance, efficiency, and precision in your pipe and tunnel inspections. Contact Poseidon Robotics today to explore how the NIU ROV can revolutionize your subsea operations. Your success is our mission!

Buy

In Stock

Manufacturer

New

ASME

Air Freight


Offshore Slickline Unit

Revolutionizing Offshore Operations: The Pinnacle of Slickline Services by InWaTec Combined In the dynamic world of oil and gas extraction, offshore platforms are the frontiers of human engineering prowess, and InWaTec Combined stands as a beacon of innovation in well intervention services. Our Offshore Slickline Unit represents the cutting-edge culmination of technology and expertise, designed to ensure the seamless operation of your offshore wells. The Essence of Slickline Operations At the heart of our service is the slickline operation, a critical aspect of well maintenance and testing. Utilizing a single strand wire, known for its robustness and simplicity, our operators skillfully navigate downhole tools through the wellbore's demanding environment. From bailers to pulling tools, stems to running tools, our slickline is the lifeline that facilitates precise interventions within oil and gas wells. Versatility at Depth Slickline's single strand wire is more than just a cable; it's a versatile tool in its own right. Whether it's deploying valves, installing plugs, or adjusting pressure regulators, slickline operations by InWaTec Combined can handle a multitude of tasks with finesse. Our operators are trained to execute complex retrievals and installations, ensuring that your well's performance is optimized at all times. Tailored for the Offshore Challenge Understanding the unique challenges of offshore operations, our services are tailored to meet the demands of Mobile Offshore Drilling Units (MODUs), Light Intervention Vessels (LIVs), and stationary offshore platforms. Our slickline units are engineered to withstand the harshest marine conditions, delivering reliable performance where it matters most. A Commitment to Excellence InWaTec Combined's Offshore Slickline Unit services are underpinned by our unwavering commitment to excellence. We are not just service providers; we are partners in your quest for operational efficiency and resource maximization. With our slickline services, we promise not just to meet but to exceed the high standards of the oil and gas industry’s offshore sector. In conclusion, InWaTec Combined is not just facilitating well interventions; we are redefining them. Our Offshore Slickline Unit services are a testament to our dedication to excellence and our unrelenting pursuit of technological advancement. Let us take your offshore operations to new depths of success.

Service

In Stock

Service

New

API

Land Freight


Diffuser Lens #1

Cap Lamp Lens

Provix in New Lowell

Meer informatie

Enhance Your Vision with the Wisdom Diffuser Lens #1 – Available Now at Provix Provix is excited to introduce the Wisdom Diffuser Lens #1 (model NWI-WLOA-LENS1), a specialized accessory designed to enhance the functionality of your cap light. Ideal for mining, construction, and other industries where clear, wide-range vision is essential, this diffuser lens is a must-have addition to your equipment. Optimized Lighting for Various Environments The Diffuser Lens #1 is expertly designed to fit Cap Light models 2, 3, and 4. It spreads light over a wide area, providing a soft, diffused beam that is perfect for illuminating large spaces without the harshness of direct light. This feature is especially beneficial in environments where clear, broad visibility is crucial for safety and precision. Versatile and Easy to Attach This lens is incredibly easy to attach and use. It seamlessly fits onto your existing Wisdom cap lights, transforming the beam into a more diffused and wide-ranging light. This versatility makes it an excellent tool for various professional and recreational activities, including mining, construction, outdoor adventures, and emergency response. Durable and Reliable Like all Wisdom products, the Diffuser Lens #1 is built to last. Its durable construction ensures it can withstand the rigors of tough working conditions, providing reliable performance time and time again. A Must-Have for Enhanced Visibility Whether you're working underground or in low-light conditions, the Wisdom Diffuser Lens #1 enhances your visibility, making your tasks easier and safer. It's an essential accessory for anyone who relies on cap lights for their work. Get Your Wisdom Diffuser Lens #1 Today Upgrade your cap light with the Wisdom Diffuser Lens #1 from Provix. Visit our website at www.provix.net to discover more about this unique product and explore our wide range of mining equipment designed to enhance your work experience.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


NWB-20 Charger

High Efficiency Miner's Cap Lamp Portable Charger

Provix in New Lowell

Meer informatie

Power Up Your Mining Gear with the Wisdom NWB-20 Charger from Provix Provix is excited to present the Wisdom NWB-20 Charger, a high-efficiency portable charger that is a game-changer for mining professionals. Tailored to meet the demanding needs of the mining industry, this charger offers reliable, fast, and efficient charging for your equipment. Versatile and Efficient Charging Solution The NWB-20 Charger features a wide-ranging AC input of AC 100-240 V ± 10%, 0.24 A, 50-60 Hz, making it suitable for global use. Additionally, its DC input of 7~30 V, 1.7 A, adds to its versatility, allowing it to adapt to various power sources. Optimized for Wisdom Mining Lamps Designed to complement Wisdom's line of mining lamps, the NWB-20 provides a maximum DC output voltage of 4.20 ± 0.05 V and a DC output current of 2000 mA ± 100 mA. It ensures efficient charging times of 6.5 hours for the KL8M and 4.5-6.5 hours for the KL5M, reducing downtime and increasing productivity in mining operations. Compact, Lightweight, and Portable The NWB-20 Charger is designed for portability and ease of use. It measures 116 x 76 x 56 mm (4.6 x 3.0 x 2.2 in) and weighs only 215 g (7.58 oz), making it easy to carry and store. This compact design is ideal for miners who need a reliable charging solution on the go. Reliable and Durable Charging Accessory This charger is not just about power; it's about durability and reliability. Its robust construction ensures it can withstand the harsh conditions often found in mining environments, providing consistent performance over time. Get the NWB-20 Charger Today Upgrade your mining equipment with the Wisdom NWB-20 Charger for a more efficient, reliable, and portable charging solution. Visit Provix to learn more about how this charger can benefit your mining operations. Explore our products at www.provix.net or contact our team for detailed information.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


9-5/8 inch Halliburton TR-SCSSSV SP

SCSSSV SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Water Injection Safety Valve 4.25 inch

WI Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Buy

Made to Order

Product

New

API

Air Freight


Flow Release Overshot for Coiled Tubing

FRO Coiled Tubing Tool

Introducing the FRO (Flow Release Overshot) from Marlin Oil Tools: Your Ultimate Solution for Efficient Fishing Operations in Oil and Gas Well Interventions Marlin Oil Tools is proud to present the FRO (Flow Release Overshot), a sophisticated downhole tool specifically designed to revolutionize fishing operations during well intervention. The FRO is engineered to offer unparalleled efficiency and reliability in capturing and retrieving objects ("fish") from the wellbore, ensuring smooth and successful operations. With its replaceable collet and adaptable design, the FRO is a must-have tool for any well intervention toolkit. Key Features of the FRO (Flow Release Overshot): Versatile Collet Design: The FRO features a replaceable collet system designed to catch and secure a smooth surface of fish, accommodating a wide range of outer diameters from 1.0” to 2-1/8”. Customizable Bottom Guide: Upon client request, the bottom of the overshot can be equipped with a guide leap, enhancing its ability to guide and catch fish with precision. Secure Fish Retrieval: The collet of the FRO overshot securely grips the fish, holding it firmly during the lifting process out of the well, ensuring safe and efficient retrieval. Pressure-Release Mechanism: In situations where the captured object cannot be released from the well, the FRO allows for an easy disengagement by applying pressure through the coil tubing, offering an additional layer of operational safety. SEO Optimized Description for Marlin Oil Tools’ FRO: Elevate your well intervention and fishing operations with the FRO (Flow Release Overshot) from Marlin Oil Tools, a leading downhole tool engineered for maximum retrieval efficiency in the oil and gas industry. Featuring a replaceable collet for capturing a range of fish sizes and an optional guide leap for enhanced precision, the FRO ensures secure and successful fish recovery. With its unique pressure-release mechanism, the FRO offers an innovative solution for challenging fishing scenarios, making it an essential component of your well intervention arsenal. Choose the FRO for reliable, efficient, and safe fishing operations. Why Choose the FRO from Marlin Oil Tools? Adaptable to Various Fish Sizes: Designed to accommodate a broad range of fish diameters, ensuring versatility across operations. Enhanced Precision and Safety: Optional guide leap improves catch accuracy, while the secure grip minimizes risks during retrieval. Innovative Release Mechanism: Provides a reliable method for disengaging from stubborn fish, enhancing operational flexibility. Durability and Reliability: Constructed to withstand the harsh conditions of downhole environments, ensuring consistent performance. The FRO (Flow Release Overshot) by Marlin Oil Tools represents the forefront of innovation in well intervention fishing operations. Incorporate the FRO into your operations to achieve optimal outcomes in fish retrieval, backed by the reliability and efficiency Marlin Oil Tools is known for.

Buy

Made to Order

Manufacturer

New

API

Land Freight


MS-152 Multistage Steam Turbine

Back Pressure Turbine

Introducing the Kessels MS-152 Multistage Steam Turbine: Unleash Unprecedented Power and Efficiency In the fast-paced world of the oil and gas industry, where precision, performance, and reliability are paramount, Kessels Steam Turbines proudly presents the MS-152 Multistage Steam Turbine. This engineering marvel is poised to redefine excellence in steam turbine technology, delivering unmatched power and efficiency. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and the MS-152 takes them to an entirely new level. Available in both single-stage and multi-stage options, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency Beyond Imagination At the heart of the MS-152 Multistage Steam Turbine is the essence of back pressure turbines – the straight-back pressure design. This innovative engineering ensures the seamless harnessing of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Limits Our MS-152 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-152 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-152 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-152 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.

Buy

Made to Order

Manufacturer

New

ISO

Air Freight


EnviroBlu 4 Litre Industrial Cleaner

EnviroBlu Cleaner and Degreaser

Industrial Cleaning with the 4-Litre EnviroBlu: The Future of Efficiency and Sustainability At Mekapisk EnviroBlu Solutions Inc., we believe in pushing the boundaries of what’s possible in industrial cleaning. Imagine a cleaner that’s tough enough to handle the biggest jobs yet compact enough to manage with ease. Introducing our 4-litre EnviroBlu cleaner—a marvel of engineering designed to transform your cleaning routine. This isn’t just a cleaner; it’s a revolution in how we approach maintenance and sustainability. The Power of EnviroBlu Efficiency and Speed In an industry where time is money, every second counts. EnviroBlu’s advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring a quick and thorough clean. Whether you’re dealing with industrial machinery, large equipment, or expansive surfaces, EnviroBlu makes the job faster and easier. Imagine cutting your cleaning time in half—that’s the power of EnviroBlu. Cost Savings Efficiency isn’t just about speed; it’s also about reducing costs. EnviroBlu’s potent formula means you use less product to achieve superior results. This translates to significant cost savings over time. Our 4-litre size is perfect for big cleaning jobs, providing enough product to tackle extensive tasks without the need for frequent resupply. Lower product usage, less downtime, and fewer purchases—all adding up to a healthier bottom line. Environmental Stewardship We’re living in a time when environmental responsibility is not just an option but a necessity. EnviroBlu’s water-based, non-toxic, phosphate-free formula is designed to be safe for both people and the planet. This isn’t just about cleaning; it’s about preserving our environment for future generations. By choosing EnviroBlu, you’re making a powerful statement about your commitment to sustainability. Why the 4-Litre Size is a Game Changer Big Jobs, Easy Handling The 4-litre EnviroBlu bottle is designed to strike the perfect balance between capacity and manageability. It’s large enough to handle extensive cleaning tasks but compact enough to be easily handled and stored. This means you get the power of an industrial-strength cleaner in a size that’s practical for everyday use. Versatility From heavy-duty industrial equipment to everyday residential cleaning, EnviroBlu’s versatility makes it an indispensable tool. Its powerful cleaning action is perfect for a wide range of applications, including: • Industrial machinery and equipment • Vehicles and heavy-duty trucks • Large commercial spaces • Residential areas, including kitchens and bathrooms Certified Safe EnviroBlu is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner. This ensures that our product is safe to use in diverse environments, including food processing areas and maritime industries. You can clean with confidence, knowing you’re meeting the highest safety standards. Directions for Use Smaller, Less Soiled Areas: 1. Mix water with EnviroBlu as per the required dilution ratio. 2. Spray the mixed solution directly on the surface. 3. Wipe the area with a dry cloth. Larger, Heavily Soiled Areas (Without Power Washer): 1. Pre-rinse the affected area with water. 2. Spray EnviroBlu directly on the target area and let it work for 1-3 minutes. 3. Brush the area if necessary. 4. Rinse thoroughly with water. 5. Repeat if the area has not been cleaned recently. Larger, Heavily Soiled Areas (With Power Washer): 1. Spray the area with a water jet only. 2. Introduce EnviroBlu into the power washer. 3. Rinse with straight water. Stay Green, Go Blu! Choose the 4-litre EnviroBlu for your big cleaning jobs. Experience the unmatched efficiency, cost savings, and environmental stewardship that only EnviroBlu can provide. Let’s transform the way we clean and build a more sustainable future together.

Buy

In Stock

Manufacturer

New

ISO

Land Freight


Storm Choke 4 inch K

Ambient valve 4 inch K style SSSV

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Buy

Made to Order

Product

New

API

Sea Freight


Technical Feasibility Study

Software Development

Eleks in Toronto

Meer informatie

Unlocking Technological Opportunities with ELEKS' Technical Feasibility Study In today's fast-paced business landscape, staying ahead means embracing innovation. But before you invest your resources, it's essential to understand the potential of emerging technologies. At ELEKS, we're your partners in exploring the latest tech trends and uncovering their possibilities for your business. Our Technical Feasibility Study, backed by our award-winning R&D team, empowers you to make informed decisions that drive innovation and success. Empowering Innovation: Explore Emerging Technologies: Navigating the vast landscape of emerging technologies can be overwhelming. We're here to guide you. Our experts delve into the realms of blockchain, IoT, AR/VR, RPA, and AI to evaluate their potential impact within your unique business environment. Solve Problems Innovatively: With reduced financial risks, you can adopt a more innovative problem-solving approach. Our seasoned engineers collaborate closely with your project team throughout the feasibility study, tackling even the most complex challenges head-on. Validate Ideas Before Investment: Mitigate risks by testing uncharted solutions to your most intricate business problems before making significant investments. Our Technical Feasibility Study minimizes technological uncertainties, giving you and your stakeholders the confidence to invest in solutions that truly work. Craft a Vision for the Future: ELEKS assists you in evaluating the alignment of emerging technologies with your current market situation and potential for investment. If a technology isn't immediately viable, we help you strategize for the right time, ensuring a solid use-case or resource-saving potential. Gain a Competitive Edge: Identify untapped market opportunities and develop solutions grounded in real-world demands using cutting-edge technology. Our expertise empowers you to create a unique selling proposition, elevating your existing products and introducing new high-tech solutions to gain a competitive advantage. Navigating the Path to Technological Success: Structured Feasibility Studies: 1. Initial Research: Our R&D team conducts exhaustive research to understand your business challenges, defining clear goals for your solution. We then assemble a team equipped to deliver on those goals. 2. Hypothesizing and Testing: With expert insights, we develop problem-solving hypotheses and rigorously test them to define the optimal technological approach. 3. Technology Selection: We identify software stacks and hardware components that align with your business requirements. Our deep knowledge allows us to assess the advantages and disadvantages of innovative technologies. 4. Deployment and Next Steps: Our experts guide you through deployment, ensuring smooth technology integration and uptake. Our Centers of Excellence provide dedicated support, including project management, BA, QA, and customer support, tailored to your feasibility study. ELEKS: Your Gateway to Technological Vision: With ELEKS' Technical Feasibility Study, you're not just investing; you're innovating with confidence. Our unwavering commitment to technology exploration and excellence positions us as your trusted partner in shaping a future defined by cutting-edge solutions. Step into the realm of innovation with ELEKS and witness the transformation of your ideas into tangible success. Embrace the future today – because your technological vision is worth it.

Service

Made to Order

Service

New

ISO


Double Insulated AWG 2/0 Cable

Welding Cable

Unleash the Power of Precision Welding with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2)! In the oil and gas industry, precision welding is not just a necessity; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our Welding Cable Double Insulated AWG 2/0 (67.4 mm2) is a testament to our commitment to excellence and innovation. Unparalleled Quality and Performance: Crafted with utmost precision, our welding cables are double insulated and made from 100% pure copper. The Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172 ensures outstanding conductivity, allowing you to achieve precise welds with ease and confidence. Built for Safety: Safety is paramount in welding operations, and our welding cables are designed with this principle in mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, our cables offer robust insulation, safeguarding you from potential hazards during welding tasks. Unrivaled Durability: The oil and gas industry demands cables that can withstand the harshest conditions. Our welding cables are engineered to be highly resistant to cuts, tears, and abrasions, ensuring they can handle the toughest challenges with ease. They are also built to resist oil, solvents, and chemicals, providing unparalleled durability in even the most demanding environments. Flexibility Redefined: Navigate through complex welding setups effortlessly with our welding cables' remarkable flexibility. With a minimum bending radius of 4 times the cable diameter, you can work in confined spaces and challenging angles without any hindrance. Environmental Responsibility: At Canaweld, we take our environmental responsibility seriously. Our welding cables are RoHS compliant, adhering to strict environmental standards and being free from harmful substances. When you choose Canaweld, you are not just investing in top-tier welding accessories but also contributing to a cleaner, greener world. Elevate Your Welding Experience: Experience the difference with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2). Unleash the power of precision welding and take your oil and gas projects to new heights of success. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. When it comes to welding, choose Canaweld for the ultimate in quality, safety, and performance. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers.

Buy

In Stock

Manufacturer

New

ASTM

Land Freight


Lean Environmental Services System (LESS)

Anti-Pollution Workover Unit

Are you looking for a game-changing solution that can revolutionize your oil and gas operations? Look no further than the Lean Environmental Services System (LESS) unit, the innovative mobile system designed to minimize pollution, risks, costs, and time during well service operations. The LESS unit is specifically designed to support and assist various well service operations such as electric line, slickline, and coiled tubing. By preventing any fluid or gas releases during these operations, the LESS unit can eliminate risks to people and the environment. The unit stores all the fluids into its tanks, reducing the risk of spills and leaks that can lead to costly cleanup operations and environmental damage. In addition to reducing risks and pollution, the LESS unit can significantly reduce costs and time associated with well service operations. With its efficient design and advanced technology, the unit can streamline operations and enhance productivity, resulting in faster job completion and higher efficiency. But that's not all - the LESS unit also offers the possibility to re-inject fluids into the well at the end of the job, further reducing environmental impact and promoting responsible resource management. With its sustainable features and advanced technology, the LESS unit is a powerful tool for companies looking to improve their environmental performance and reduce their carbon footprint. Don't miss out on the opportunity to revolutionize your operations with the Lean Environmental Services System (LESS) unit. Contact us today to learn more about how this innovative mobile system can benefit your business and help you achieve your sustainability goals.

Rental

In Stock

Product & Service

New

API

Land Freight


Data Strategy

Software Development

Eleks in Toronto

Meer informatie

Transforming Businesses Through Data Strategy Consulting: Unlock Your Data's Full Potential In today's data-driven world, businesses thrive by harnessing the power of data. But how do you navigate this landscape to make smart decisions that drive success? Enter ELEKS' Data Strategy Consulting – a comprehensive solution that combines design, implementation, and provisioning support to help you harness the full potential of your data. Empowering Data-Driven Success: Harness Data for Informed Decisions: Our expert data team lays the groundwork for effective data analysis. Gain insights into customer behaviors, scenarios, and value points, allowing you to make well-informed decisions that add real value. Enhance Operational Efficiency: Say goodbye to duplicated workloads. Our data strategy consultants streamline data management processes across your organization, freeing up your team to focus on your core business. Create New Revenue Streams: Monetize your data to tap into new revenue opportunities. Embed data into your products, services, or even sell it to your customers. This not only enhances customer experience but also boosts brand loyalty and drives sales. Ensure Compliance and Security: Data privacy and security are paramount. Our consultants meticulously plan enterprise data management projects, ensuring data safety through provisioned access and auditing. Streamline Cross-Department Collaboration: Facilitate collaboration between departments by defining clear processes and data management rules. Enhance access to data, fostering collaboration and maintaining peak performance. Navigating Data Strategy Success: Designing Data Strategy: 1. AS-IS Analysis: Our data strategy journey starts by assessing your current data landscape. We identify components, users, and potential limitations, evaluating data processes' maturity, security standards, and more. 2. TO-BE Analysis: Crystalize your future digital strategy. Define success criteria and objectives, merging data analytics with business goals to determine achievable milestones and ambitious targets. 3. Transition Planning: Prioritize value vs. complexity and create a tailored roadmap. Develop a blueprint that includes timelines, milestones, resources, and metrics, while assessing dependencies and risks. Executing Data Strategy: End-to-End Guidance: Our experts support your strategy's implementation, drawing from a pool of skilled engineers and data scientists. We ensure your project aligns with your company's needs. Implementation Support: Seamlessly roll out your data strategy company-wide. We monitor progress using pre-defined metrics and KPIs to ensure successful deployment. Key Deliverables of Enterprise Data Strategy: Our comprehensive approach includes assessing existing practices, decision-making processes, and data architecture. The result? A detailed plan that incorporates performance targets and strategies for moving forward. Why Choose ELEKS for Your Data Strategy: End-to-End Support: ELEKS provides comprehensive support, from design to implementation. Our data strategy consultants offer the full spectrum of services to help you achieve your goals seamlessly. Specialist Expertise: Gain insights from award-winning specialists in domains like data science, DevOps, and cybersecurity. We tailor solutions to your unique needs, ensuring total confidence in your data strategy. Scalable Platforms for Automation: Data Science Platform (eDSP): Our proprietary platform streamlines the design and management of machine learning models. eDSP, based on Kubernetes, enables rapid delivery of data analytical initiatives and significant cost savings. Compliance Automation Platform: Automate compliance efforts in regulated sectors, reducing costs and managing changes in regulations with ease. Seamless integration via RESTful API ensures effortless adoption. ELEKS: Your Partner in Data Transformation: In a world driven by data, ELEKS' Data Strategy Consulting unlocks limitless possibilities. Make informed decisions, enhance efficiency, and create new revenue streams with confidence. Embrace the power of data-driven success today – because your data's potential is boundless.

Service

Made to Order

Service

New

ISO


Stickwelder 5001C Series

Welding Machine

Introducing the Stickwelder 5000 Series: Unleash the Power of Heavy-Duty Welding! At Canaweld, we are committed to providing welders with top-of-the-line equipment that delivers exceptional performance across a broad range of metals and thicknesses. Designed with the construction and oil & gas industries in mind, we proudly present the Stickwelder 5000 Series - a heavy-duty unit that will revolutionize your welding experience. Unmatched Performance in Tough Conditions The Stickwelder 5000 Series is built to withstand the harshest conditions. Its heavy-duty power source ensures ruggedness, reliability, and ease of use, making it the ultimate workhorse for heavy-duty fabrication shops. No matter the task, this welding machine is up to the challenge. Versatility at its Best Experience excellent welding characteristics in Stick welding with any kind of rods, particularly cellulosic electrodes, and TIG welding with a lift start. The Stickwelder 5000 Series boasts dynamic characteristics that set it apart from the competition, providing unparalleled control and precision in every weld. Precision Arc Length Control Tack welding becomes a breeze with the Stickwelder 5000 Series. Its arc length control feature guarantees ease of use and ensures precise and efficient tack welding for flawless results. Powerful and Efficient With an impressive 400 Amps of power and a high-duty cycle, this welding machine is a force to be reckoned with. Tested in scorching temperatures of 140°F/60°C, it delivers optimum performance, ensuring your projects are completed with speed and efficiency. Extended Reach, Enhanced Convenience With a suitability to be used with main cable lengths up to 330 feet (100 meters), the Stickwelder 5000 Series gives you the freedom to work comfortably and conveniently, even in large-scale projects. Advanced Technology for Ease of Use Equipped with a digital display, digital Ammeter, and Voltmeter, setting and monitoring current levels have never been easier. Additionally, the Stickwelder 5000 Series offers the option to activate the VRD function, further enhancing user safety. Reliable on Any Job Site No power fluctuations can hinder your welding performance, thanks to the Stickwelder 5000 Series' automatic compensation feature, accommodating main voltage fluctuations within ± 20%. Built for Your Success Engineered to adapt to generator power, this welding machine ensures seamless operation in any work environment. Choose Excellence with Canaweld Experience welding perfection and peace of mind with Canaweld's comprehensive 3-year warranty. Invest in the Stickwelder 5000 Series and elevate your welding projects to new heights. Take charge of your welding journey with the Stickwelder 5000 Series. Unleash the power of heavy-duty welding, experience unmatched versatility, and conquer every welding challenge with ease. Canaweld - Your Partner in Welding Excellence!

Buy

In Stock

Manufacturer

New

ASME

Land Freight


Planers Leasing

Elevate Your Business with Planer Equipment Leasing from CWB National Leasing Transforming Your Operations Through Flexible Equipment Solutions For businesses in construction, woodworking, or manufacturing, having the right planer equipment is essential for precision and efficiency. Leasing your planers through Canadian Western Bank (CWB) National Leasing offers an innovative and financially prudent way to enhance your operations. Here's how leasing planers can significantly benefit your business: 1. Speedy Equipment Procurement CWB National Leasing values the importance of time in your business. They ensure a quick leasing process, with a decision typically made within 48 hours of application submission. This rapid turnaround means your planer equipment can be delivered and operational soon after approval, minimizing any disruption to your projects. 2. Boosted Purchasing Power Leasing planers with CWB National Leasing increases your financial leverage. Instead of a large initial investment, you can make periodic payments, thereby freeing up capital for other business investments. Furthermore, you have the option to add extra features or accessories to your equipment with a minor increase in payments, enhancing its capabilities. 3. Optimized Cash Flow Management With smaller, spread-out lease payments, your planer equipment starts contributing to your revenue even as it's being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for business stability and growth. 4. Customized Payment Structures Recognizing that every business has unique financial needs, CWB National Leasing offers flexible payment options, including seasonal, semi-annual, or annual plans. This adaptability is particularly beneficial for businesses with fluctuating income patterns, ensuring that payments align with your financial flow. 5. Potential Tax Advantages Leasing can offer tax benefits, such as allowing you to expense lease payments instead of capitalizing the cost of the planer equipment. Consulting with a tax advisor is advisable to understand how leasing can favorably impact your business’s tax position. Conclusion Opting to lease planer equipment through CWB National Leasing is a strategic decision that provides your business with necessary tools while maintaining financial agility. It ensures access to advanced equipment, essential for precise and efficient operations, without the financial burden of a large upfront purchase. This approach paves the way for enhanced operational capabilities, growth, and profitability in your business.

Service

In Stock

Service

New

ISO


ImplosionStixx by StimStixx

ImplosionStixx

Introducing the ImposionStixx by StimStixx Technologies - Redefining Wellbore Perforation Cleaning with Precision Implosion! Are you ready for a game-changing solution to enhance your wellbore perforation cleaning? Look no further than the ImposionStixx by StimStixx Technologies. Our revolutionary product utilizes a specially formulated solid acid stick, capable of delivering heated acid vapor with pinpoint accuracy at the zone of interest, while creating an extraordinary implosion downhole. Harnessing the power of highly reactive heated acid vapor, the ImposionStixx guarantees increased penetration and optimal contact with contaminants and carbonate scale, effectively cleaning wellbore perforation tunnels like never before. The implosion created downhole ensures a thorough and efficient cleaning process, leaving no room for compromise when it comes to well stimulation. The ImposionStixx offers unparalleled environmental benefits as well. As the heated acid vapor interacts with contaminants and carbonate scale, it vaporizes and becomes fully spent down-hole, leaving no contaminated effluent behind. This not only reduces the risk of spills at the surface but also eliminates the need for post-treatment clean-up or disposal. With StimStixx Technologies, you can rest assured that you are making a choice that prioritizes both operational excellence and environmental responsibility. Say goodbye to traditional methods that fall short in achieving the level of precision and effectiveness you deserve. The ImposionStixx is here to revolutionize wellbore perforation cleaning, providing you with exceptional results, increased operational efficiency, and peace of mind. Join the ranks of industry leaders who trust StimStixx Technologies to deliver cutting-edge solutions for well stimulation. Experience the power of precision implosion with the ImposionStixx and unlock the true potential of your wellbore perforation cleaning. The future of well stimulation starts here.

Buy

In Stock

Product & Service

New

API

Air Freight


HDI M100 Pressure Gauge

Electronic Pressure Gauge

At Houston Digital Instruments (HDI), we are committed to providing cutting-edge measurement solutions to our customers. While we have replaced the HDI M100 Pressure Gauge with our latest innovation, the HDI 2000P, we understand that there are still existing installations of the M100 in the field. That's why we continue to offer parts and services to ensure ongoing support for your equipment. Reliable Performance in a Compact Design: The HDI M100 Pressure Gauge, though discontinued, has left a lasting legacy of dependable performance. This battery-powered gauge features a solid-state platform with no fluids or moving parts, providing accurate pressure measurements in a compact and robust package. With pressure ranges of 6,000 psi, 10,000 psi, and 16,000 psi, you can select the configuration that suits your specific needs. Field Repairable and Battery Powered: The M100 Pressure Gauge is designed for easy maintenance and minimal downtime. If repairs are ever needed, our field repairable system ensures that you can quickly address any issues and keep your operations running smoothly. The low battery indicator keeps you informed of the gauge's power status, allowing for timely battery replacements and uninterrupted monitoring. Versatile Connectivity Options: We understand that different applications require different connection types. The M100 offers various connection options, including 2" Male NPT, 2" 1502, 2" 2202, or flanged connections. This flexibility allows you to seamlessly integrate the gauge into your existing setup. Additionally, the M100 provides 4-20mA or 0-1 volt output options, enabling compatibility with your preferred data acquisition systems. Enhanced Visibility and Durability: In demanding environments where vibrations are present, the M100 Pressure Gauge demonstrates consistent performance. Its solid-state design ensures resistance to high vibration environments, ensuring accurate and reliable pressure readings. The analog bar graph with a divided scale provides clear and intuitive visualization, even in challenging conditions. Future-Proof Your Measurement Solutions: While the HDI M100 Pressure Gauge may have reached the end of its production cycle, we are excited to introduce its successor, the HDI 2000P. This advanced pressure gauge system offers enhanced features, improved accuracy, and expanded configuration options. Our dedicated team is ready to assist you in transitioning to the HDI 2000P, providing a seamless upgrade to your pressure measurement capabilities. Continued Support for Existing Installations: We understand the importance of maintaining and servicing existing equipment. Even though the M100 Pressure Gauge is no longer in production, we are committed to supporting our customers who rely on this legacy product. Our comprehensive parts inventory and expert technicians ensure that you can access the necessary resources to keep your M100 Pressure Gauge operational. For any inquiries, parts, or service requests related to the HDI M100 Pressure Gauge, please reach out to our dedicated support team. We are here to assist you in maximizing the lifespan and performance of your equipment. Houston Digital Instruments remains dedicated to providing innovative, reliable, and future-proof measurement solutions. Trust us to deliver excellence in measurement technology, ensuring your continued success in a dynamic industry.

Service

Tempory Sold Out

Service

New

API

Air Freight


Circulating Type Chokes for Nipples

Downhole Tools

HOCA Oil Tools: Mastering Flow Control with Circulating Type Chokes for Nipples In the specialized field of downhole operations, mastering the control of fluid flow within the wellbore is critical for operational success and efficiency. HOCA Oil Tools is at the forefront of this challenge, offering advanced solutions with our Circulating Type Chokes for Nipples. Designed to integrate seamlessly with landing nipples in the wellbore, these tools are essential for precise flow control and well management during various downhole activities. HOCA’s Circulating Type Chokes for Nipples: Precision Engineered for Optimal Flow Control Our Circulating Type Chokes for Nipples are designed for operators seeking to maintain precise control over fluid flow in their downhole operations. Whether for circulation, testing, or intervention tasks, our chokes provide the versatility and reliability needed in today’s diverse well environments. Constructed with the highest quality materials and engineered to withstand harsh downhole conditions, HOCA’s chokes ensure optimal performance and durability. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Circulating Type Chokes for Nipples means opting for a solution that embodies innovation, quality, and operational excellence. Our commitment to providing cutting-edge downhole solutions ensures that our products meet the complex demands of modern oil and gas operations, delivering performance that exceeds expectations. Incorporating our Circulating Type Chokes into your downhole toolkit signifies a step toward enhanced operational control, efficiency, and safety. With HOCA Oil Tools, you gain not just a supplier but a dedicated partner committed to supporting your downhole challenges with advanced solutions and expert service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Circulating Type Chokes for Nipples. Partner with us, and elevate your downhole flow control to new levels of precision and reliability. With HOCA Oil Tools, enhance your downhole operations with tools that redefine efficiency, safety, and performance in the demanding oil and gas industry.

Buy

In Stock

Product & Service

New

API

Air Freight


MLE Clamp for ESP's

ESP (Electric Submersible Pump) Cable Protector

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Buy

In Stock

New

New

API

Air Freight


CSA 120 unit, non-Locking FAST charger rack

Miner's Cap Lamp Charging Station

Provix in New Lowell

Meer informatie

Maximize Charging Efficiency with the CSA 120 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to present the CSA 120 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-120BC), a large-scale charging solution designed for operations that demand quick and efficient charging of a high volume of equipment. This charger rack is perfect for extensive mining operations, large construction sites, and industrial settings where time and space are of the essence. High-Capacity, Rapid Charging The CSA 120 Unit Charger Rack is engineered to meet the needs of large teams, offering rapid charging times of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This fast charging capability is crucial for operations where equipment must be ready for continuous use, ensuring minimal downtime and maximum productivity. Designed for Space Efficiency Despite its large capacity, the CSA charger rack is designed to be space-efficient. It’s an ideal solution for organizations that need to manage a significant number of devices but have limited space. This single-sided charger rack can be easily placed in equipment rooms or centralized charging stations, optimizing your workspace. Easy Access and User-Friendly The non-locking feature of this charger rack offers easy and quick access to all charging ports, making it straightforward to manage multiple devices. This design is particularly beneficial in dynamic work environments where quick equipment turnaround is essential. Durable and Reliable for Industrial Use Constructed with durability in mind, the CSA 120 Unit Charger Rack is built to withstand the demanding conditions of mining and industrial environments. Its robust construction ensures it can provide reliable performance over time, making it a smart investment for large-scale operations. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and equipment rental providers who need to charge a substantial number of devices efficiently. Its high capacity and fast charging capabilities make it an indispensable tool for operations of considerable size. Upgrade Your Charging Station Equip your operation with the Wisdom CSA 120 Unit Non-Locking FAST Charger Rack from Provix. Visit our website at www.provix.net to discover more about this high-capacity, efficient charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions.

Buy

In Stock

Manufacturer

New

ANSI

Air Freight


Offshore Electric Line Services

Navigating the Depths: InWaTec Combined's Advanced Offshore E-Line Services In the challenging and complex world of offshore operations, precise and dependable wellbore data transmission is not just beneficial—it's crucial. At InWaTec Combined, our Offshore Electric Line (E-Line) services are the cornerstone of our well diagnostics and intervention solutions, designed to conquer the unique demands of the offshore environment. An E-Line, in its simplest form, is a robust electric cable. Yet, when deployed by InWaTec Combined, it becomes an integral part of offshore operations, a sophisticated tool that delves into the wellbore's mysterious realms. Our E-Line services excel in transmitting real-time data about the wellbore's conditions back to our offshore experts, ensuring that critical decisions are made with the utmost information at hand. Our E-Line's forte lies in its versatility and utility in conducting a plethora of logging activities essential for evaluating the well's integrity, formation properties, and hydrocarbon potential. These activities enable a comprehensive understanding of the well, providing insights necessary for optimizing production and ensuring the safety of offshore operations. The offshore environment poses unique challenges with its unpredictable nature and the sheer scale of operations. InWaTec Combined's E-Line services are designed to be resilient and adaptable, capable of withstanding the high pressures and corrosive elements found in the deep sea. Our commitment to innovation means that our E-Line technology is continuously evolving, pushing the boundaries of what is possible in offshore data gathering. By choosing InWaTec Combined's Offshore E-Line services, our clients receive more than just data—they gain a strategic advantage. With our advanced technology and expert analysis, we provide the insights necessary to maximize well performance, extend the life of offshore assets, and enhance the overall safety and efficiency of offshore operations. In an industry where the margin for error is slim and the consequences significant, InWaTec Combined stands as a beacon of reliability and excellence. Our Offshore E-Line services are not just a component of your operations—they are a pivotal part of your success story, deep beneath the waves.

Service

In Stock

Service

New

API

Land Freight