Stand off Protector

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Optimize Your Downhole Retrieval Operations with HOCA Oil Tools' Shear Down External Fishing Neck Pulling Tools In the intricate world of oilfield operations, ensuring seamless downhole tool retrieval is pivotal for maintaining efficiency and minimizing downtime. HOCA Oil Tools, a specialist in crafting superior downhole slick line tools, proudly presents its Shear Down External Fishing Neck Pulling Tools. These tools are engineered with precision to facilitate the secure and efficient retrieval of subsurface equipment, enhancing operational effectiveness and safety. HOCA’s Shear Down External Fishing Neck Pulling Tools: Precision Engineered for Enhanced Retrieval Our Shear Down External Fishing Neck Pulling Tools are designed for operators who demand reliability and precision in their downhole activities. Built to engage and retrieve subsurface equipment with external fishing necks, these tools are essential for operations requiring the removal of downhole instruments. Equipped with a shear-down mechanism, these pulling tools allow for disengagement in scenarios where the retrieved equipment becomes immovably stuck, thereby ensuring the safety and continuity of operations. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with downhole solutions that meet the demands of modern well operations. Our Shear Down External Fishing Neck Pulling Tools represent our commitment to innovation, quality, and customer satisfaction. Whether you are addressing routine retrieval tasks or facing complex downhole challenges, our tools are designed to enhance the efficiency, safety, and success of your operations. By incorporating our Shear Down External Fishing Neck Pulling Tools into your downhole toolkit, you are choosing a product that delivers on the promise of operational excellence. With HOCA Oil Tools, you gain not just a supplier, but a partner committed to supporting your success with state-of-the-art solutions and expert service. Choose HOCA Oil Tools for your downhole needs and take the first step towards more efficient, safe, and cost-effective retrieval operations. Elevate your downhole performance with HOCA Oil Tools – where innovation, quality, and reliability come together to drive your success.

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Introducing the TIG AC/DC 281 Pulse: Precision Welding at its Finest When it comes to precision welding, the TIG AC/DC 281 Pulse from Canaweld stands head and shoulders above the rest. As an industrial, heavy-duty, and powerful welding machine, it has been designed to deliver exceptional results, making it the ideal choice for all your welding needs. Precision Pulse Welding - Unmatched Quality The TIG AC/DC 281 Pulse is equipped with professional pulse features and an HF start that allows welders to achieve high-quality TIG welds even on the thinnest materials without any distortion. Its inverter-based arc welding power source with advanced waveforms and pulse controls sets a new standard for welding excellence in industrial workshops. Advanced 5-inch Color Display - Simplified Control Navigating your welding experience is effortless with the TIG AC/DC 281 Pulse's 5-inch LCD screen. Whether you're an experienced welder or a novice, this display empowers you to quickly and accurately set and select the right parameters, reducing setup time and increasing your actual welding productivity. All the features can be easily customized and saved in the available memory settings, ensuring consistency and efficiency in every project. Powerful Performance and Versatility With the TIG AC/DC 281 Pulse, you can tackle a wide range of welding tasks with ease: • Capability to TIG weld aluminum and steel workpieces up to 3/8 inch (9.5 mm) in thickness, delivering a maximum output of 280 amps for demanding applications. • AC waveforms, including progressive square wave, sine wave, and triangular wave, provide precise control for different materials and welding needs. • Up to 10 memory locations to store your most important weld parameters, giving you quick access to frequently used settings. • Adjustable soft welding start and powerful start options, ensuring perfect arc initiation for both thin and thicker materials. • Adjustable balance settings for aluminum welding, allowing you to control cleaning and penetration sequences effectively. Built Tough for Challenging Environments The TIG AC/DC 281 Pulse is engineered to withstand the toughest conditions, thanks to its rigorous testing in (104°F/40°C). Its durable and efficient design ensures you can rely on it for flawless performance, no matter where your welding projects take you. Efficiency Meets Innovation The TIG AC/DC 281 Pulse offers innovation at its core: • High-frequency (HF) start for perfect arc initiation and stability, minimizing downtime and maximizing productivity. • Digital control of all welding parameters, giving you complete control over the welding process. • Amperage control accessible by foot pedal, providing precise control over welding intensity. • Pulse TIG welding for better arc control and minimized workpiece distortion, perfect for achieving immaculate welds. • The ability to use up to 165 feet (50 meters) leads without any power loss, ensuring flexibility and mobility in your workspace. • Digital adjustment of pre-flow, initial amperage, welding amperage, initial slope, pulse parameters, final slope, and post-flow, enhancing precision and efficiency. Unwavering Commitment to Quality With Canaweld's comprehensive 3-year warranty, you can weld with peace of mind, knowing that your TIG AC/DC 281 Pulse is backed by our commitment to quality and customer satisfaction. Innovative Wind Tunnel for Cooling Efficiency The TIG AC/DC 281 Pulse incorporates an innovative wind tunnel for cooling efficiency, ensuring consistent performance even during long welding sessions. Experience Precision Welding with Canaweld Take your welding to the next level with the TIG AC/DC 281 Pulse from Canaweld. Experience precision welding at its finest and elevate your projects with unparalleled performance and control. Choose Canaweld and let the TIG AC/DC 281 Pulse redefine your welding experience. Achieve perfection with Canaweld!

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Introducing the JWN Jet Wash Nozzle from Marlin Oil Tools: A Revolution in Well Intervention and Perforation Technology Marlin Oil Tools is proud to unveil the JWN Jet Wash Nozzle, an advanced downhole tool specifically engineered for precision well intervention and perforation tasks. As a critical component of the Bottom Hole Assembly (BHA), the JWN Jet Wash Nozzle is designed to enhance the efficiency of perforating casing or tubing by utilizing a high-speed jet of a gel-sand mixture directed at the well's inner casing wall. Here’s why the JWN Jet Wash Nozzle is a game-changer in the oil and gas industry. Key Features of the JWN Jet Wash Nozzle: Precision Perforation: The JWN Jet Wash Nozzle delivers a high-velocity jet stream of a gel-sand mixture, enabling precise and efficient perforation of the casing or tubing. Abrasive-Resistant Materials: Constructed from materials that resist wear from abrasive particles, ensuring longevity and reliability under harsh downhole conditions. Versatile Design Options: Available in a basic design for continuous circulation or a ball-activated design that opens nozzles only after a ball drop, providing flexibility for specific operational needs. Enhanced Well Productivity: By performing abrasive cuts through metal, cement, and part of the surrounding rock, the JWN enhances well connectivity and productivity. Seamless BHA Integration: Designed to run in hole as part of the BHA alongside other downhole tools, the JWN Jet Wash Nozzle is compatible with a wide range of well intervention equipment. Elevate your well intervention and perforation operations with the JWN Jet Wash Nozzle from Marlin Oil Tools, a leading-edge solution designed for optimal efficiency and precision in the oil and gas sector. Featuring abrasive-resistant nozzles and a high-speed gel-sand mixture jet, the JWN Jet Wash Nozzle precisely perforates casing and tubing, improving well productivity. With options for continuous circulation or ball-activated operation, this tool offers unparalleled flexibility and durability for your well intervention needs. Choose the JWN Jet Wash Nozzle for a reliable, efficient, and versatile solution in enhancing well connectivity and output. Why Choose the JWN Jet Wash Nozzle from Marlin Oil Tools? Targeted Perforation: Achieves precise perforation for improved fluid flow and well performance. Durable Construction: Built to withstand the rigors of abrasive materials, ensuring tool integrity and operational longevity. Operational Flexibility: Adapts to various well intervention scenarios with basic and ball-activated designs. Improved Efficiency: Reduces downtime and enhances well productivity through efficient and effective perforation. The JWN Jet Wash Nozzle by Marlin Oil Tools represents the pinnacle of well intervention technology, providing operators with a powerful tool for enhancing well integrity and performance. Incorporate the JWN Jet Wash Nozzle into your operations to achieve superior results in well perforation and intervention tasks.

Lovat Gas Solutions: Your Dependable Partner for LNG Supply When it comes to LNG supply, Lovat Gas Solutions has a proven track record of delivering, no matter the conditions or location. We understand that your business relies on the uninterrupted availability of natural gas, whether you are an industrial user or a utility. That's why we are here to provide you with peace of mind, allowing you to focus on your core business while we take care of your gas supply needs. Our commitment to excellence means that we go above and beyond to ensure the dependability of our LNG supply. We have a deep understanding of the unique challenges and requirements of different industries, and our experienced team is well-equipped to develop a solution that caters to your organization's specific needs. At Lovat Gas Solutions, we offer flexible options for LNG supply to accommodate your business requirements. Whether you need a short-term supply to cover temporary spikes in demand, a long-term solution to support your ongoing operations, or a reliable backup supply to safeguard against unforeseen disruptions, we have you covered. By partnering with us, you can expect: 1. Reliability: We have a proven track record of delivering LNG supply, regardless of the conditions or location. Our robust infrastructure and logistical expertise ensure that your business receives a consistent and dependable supply of natural gas. 2. Expertise: With years of experience in the industry, our team possesses extensive knowledge and understanding of LNG supply. We stay up-to-date with the latest advancements and industry trends to provide you with the best possible solutions. 3. Customized Solutions: We recognize that each organization has unique needs. Our team will work closely with you to understand your specific requirements and develop a tailored LNG supply solution that aligns with your business goals. 4. Peace of Mind: When you partner with Lovat Gas Solutions, you can have peace of mind knowing that your gas supply needs are in capable hands. Our reliable and responsive service ensures that you can focus on your business without worrying about interruptions in your natural gas supply. Don't let the uncertainties of LNG supply hinder your business operations. Contact Lovat Gas Solutions today, and let us develop a dependable short-term, long-term, or backup supply of natural gas that suits your organization's needs. Trust us to deliver, no matter the conditions or location, so you can keep your business running smoothly and efficiently. Get in touch with us now to explore how we can support your gas supply requirements and help your business thrive.

ID OILTOOLS is proud to offer the cutting-edge HERO-HR™, SUPER HERO®, and HERO® charges from Owens, which feature advanced, patented technology that yields numerous benefits for perforating operations. With the addition of tungsten in shape charges years ago, debris was an undesirable byproduct that reduced the effectiveness of the perforation tunnel volume. Owens' patented liner material eliminates this issue by using molybdenum and an improved geometry to prevent spent tungsten from becoming a solid. The result is a clean perforation tunnel that reduces frac breakdown pressures and improves flow efficiency, making the HERO® line of Gun Systems an industry leader. The HERO® Line of Perforating Gun Systems is designed with the latest 'New Technology' developed by Owens Oil Tools, certified under new API RP 19B Standards. Owens' Perforating Gun Systems are available in various sizes and types, ensuring a perfect match for any completion design and formation demands. ID OILTOOLS is proud to offer HERO® charges to our customers, ensuring maximum penetration and flow efficiency while reducing the debris typically associated with high-density liner materials. Trust ID OILTOOLS to provide you with the best-performing, most effective perforating solutions on the market.

Introducing Safe-T-Whip™ Continuous RD-Long 13’ (SW-RD-02-L): Unparalleled Safety and Reliability for Longer Restraint Applications At Safe-T-Whip & Restraints Inc., safety is at the core of everything we do. We are thrilled to introduce our latest innovation - the SW-RD-02-L Safe-T-Whip™ Continuous RD-Long. Designed specifically for regular duty applications that require a longer restraint, this safety whip offers unmatched protection and reliability for pressurized pipe fittings in the oilfield. Dependable Regular Duty Design: Identified by its eye-catching yellow color and complemented by a yellow tag, SW-RD-02-L Safe-T-Whip™ Continuous RD-Long is meticulously crafted from robust 1/2" 12-Strand HMPE fiber. This reliable safety restraint is engineered for use on 2-inch 1502 hammer union pipelines up to an impressive 15,000psi or 3-inch iron up to 10,000psi. When you need a longer restraint without compromising on safety, trust Safe-T-Whip™ Continuous RD-Long to deliver. Enhancing Safety with Continuous Restraints: The Safe-T-Whip™ Continuous RD-Long is an integral part of our safety restraint system, designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, minimizing dangerous impacts. Engineered for Maximum Security: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, as well as swivels and joints. Each section is secured by both the upstream and downstream sections of the flowline in the event of failure. However, it is essential to evaluate the piping system to ensure adequate anchoring both upstream and downstream for optimum safety. Certified for Excellence: Safety is our priority, and that's why all Safe-T-Whip™ Restraints and Anchors are thoroughly tested and certified to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatile and Effective: The Safe-T-Whip™ Continuous RD-Long is a variation of restraint designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. This versatility allows you to tailor your safety configuration to your specific needs, ensuring the highest level of protection for your operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous RD-Long is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous RD-Long, you can rest assured that your operations are protected from catastrophic failures. Invest in Unparalleled Safety: SW-RD-02-L Safe-T-Whip™ Continuous RD-Long is the ultimate safety restraint for longer applications. Trust in the power of Safe-T-Whip™ to safeguard your workforce, equipment, and operations. With Safe-T-Whip & Restraints Inc., safety is always at the forefront. Secure your Safe-T-Whip™ Continuous RD-Long today.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Accelerate Your Fabrication Success with Welder Leasing from CWB National Leasing Empowering Your Business with State-of-the-Art Welding Solutions In industries such as manufacturing, construction, automotive repair, and metalworking, high-quality welders are essential for efficient, precise, and reliable fabrication work. Leasing welders through Canadian Western Bank (CWB) National Leasing presents a flexible, cost-effective, and intelligent solution for businesses seeking to enhance their welding capabilities. Here’s how leasing welders can boost your business operations: 1. Fast Access to Advanced Welding Equipment CWB National Leasing understands the critical role of welding equipment in your operations. They offer a swift leasing process, typically notifying your equipment dealer about payment within 48 hours of approval. This rapid service means your welders can be delivered and operational quickly, enhancing your fabrication efficiency and reducing project turnaround times. 2. Enhanced Financial Flexibility Leasing welders with CWB National Leasing enhances your buying power. It allows you to allocate resources efficiently by opting for periodic payments over a significant upfront purchase. The flexibility to add extra features or accessories to your welders for a small payment increase enables customization to meet specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your welders start contributing to your business’s revenue while they're still being paid off. This strategy helps maintain a healthy balance between expenses and income, crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing welders can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease welders through CWB National Leasing is a strategic decision that equips your business with essential welding tools while maintaining financial agility. It ensures access to the latest welding technology, vital for high-quality fabrication, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business excel in the competitive fabrication and manufacturing industries.

Supercharge Your Business with Leased Modems from CWB National Leasing Are you ready to propel your business to new heights and boost your profits? Look no further because CWB National Leasing is your partner in success when it comes to leasing modems. Here's why choosing us is the smart move for business owners like you: Get Your Equipment Fast In the fast-paced world of business, time is of the essence. At CWB National Leasing, we understand that, and we've designed our process to be lightning-fast. When you apply for a modem lease, we don't keep you waiting. In fact, we pride ourselves on delivering a quick decision on your lease application. How quick, you ask? We typically notify your chosen equipment dealer that payment is on its way within just 48 hours of your approval. So, while you focus on running your business, you can trust us to handle the logistics and have your modem equipment delivered promptly. Check out our approval turnaround times to witness our commitment to speed and efficiency. Increase Your Buying Power Your buying power is a valuable asset, and we're here to help you leverage it to the fullest. Instead of making a significant upfront purchase, consider the advantages of periodic lease payments offered by CWB National Leasing. By choosing leasing, you can free up crucial cash resources that can be invested in other critical areas of your business. But that's not all—we go a step further by allowing you to add extra features or accessories to your modem equipment for a minor payment increase. That's right; we put the "POW" in Buying Power, giving you the flexibility to customize your equipment to suit your unique needs. Control Your Cash Flow Managing cash flow effectively is essential for any successful business. When you lease modems with CWB National Leasing, you gain a powerful tool to achieve this control. Our lease agreements are structured to ensure small and manageable payments throughout the term of your lease. What does this mean for you? It means that while you pay off your modem equipment, it will start generating revenue for your business. This approach makes it easy to strike the right balance between expenses and revenue, putting you in control of your financial success. Seasonal Payment Options We understand that businesses often experience seasonal variations in revenue. At CWB National Leasing, we're all about flexibility. Our leasing solutions are designed to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to align seamlessly with your revenue patterns. With CWB National Leasing, your modem lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing modems through CWB National Leasing isn't just financially savvy; it can also offer potential tax benefits for your business. In many cases, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully grasp how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will help you navigate the tax advantages of leasing modems with confidence. In conclusion, leasing modems with CWB National Leasing is the strategic choice for business owners who are serious about success. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't miss the opportunity to supercharge your business; choose CWB National Leasing for all your modem leasing needs today!

Introducing the X-SPAN Tubing/Casing Patch System from ID OILTOOLS! This proven, durable and dependable system is the solution you've been looking for to seal perforations, holes, splits, corrosion or leaks of any kind in all types of tubulars. The X-SPAN system is incredibly versatile and can be deployed using a myriad of methods in virtually any type of well bore. It's the economical and reliable solution for a wide range of applications, including shutting off unwanted water or gas influx, zonal protection for frac-through applications, repairing tubular leaks from pin holes to collar leaks, repairing corroded or eroded tubing or casing, as well as isolating frac ports and auxiliary tools in horizontal wells. With its large bore, the X-SPAN system allows for easy passage of service tools including bridge plugs, drop balls, seal bore assemblies, logging tools and perforating systems. Plus, its minimal surface equipment required for deploying the patch and rigless intervention results in significant savings for the operator. The metal-to-metal X-SPAN seal is proven technology engineered for high temperature applications while yielding the highest burst and collapse pressure ratings in the industry. The X-SPAN Tubing Casing Patch can be deployed to protect up to 300ft (91m) sections of tubing or casing on a single trip. Multi-trip stackable systems are available to span intervals longer than 300ft (91m). At ID OILTOOLS, we understand that extreme well bore environments require premium alloys. That's why we offer custom sized X-SPAN systems designed using premium alloys to meet your specific needs. Choose the X-SPAN Tubing/Casing Patch System from ID OILTOOLS for proven, reliable and versatile tubular repair solutions. Contact us today to learn more!

Unleashing the Full Potential of the Lanai ROV with Poseidon M0020 Backplates At Poseidon Robotics, we are dedicated to pushing the boundaries of subsea exploration and empowering our customers with the most advanced and field-friendly tools. Our latest innovation, the Poseidon M0020 backplate, takes the capabilities of our Lanai ROV to new heights, offering a versatile and efficient solution for all your underwater missions. Designed for Field-Friendly Operations When it comes to subsea operations, ease of use and adaptability are paramount. We understand the challenges our customers face in the field, which is why we developed the Poseidon M0020 backplate with their needs in mind. Our team of experts meticulously engineered this backplate to optimize its performance and enhance the overall ROV experience. Unrivaled Connectivity and Expandability The Poseidon M0020 backplate is a feat of engineering, incorporating a carefully planned configuration that includes multiple threaded locations to accommodate various connectors, sensors, and accessories. With 8 locations threaded for 7/16-20 connectors, 7 locations threaded for M10 sensors, and a small M6 location for lights, this backplate opens up a world of possibilities for customization and expansion. Enhanced Functionality with Manipulators and Accessories We designed the M0020 backplate to provide optimal support for a grabber, such as the BLUEPRINTLAB Reach Alpha, and two auxiliary ports for accessories like sonar, USBL, or mini-SVX. This flexibility allows you to tailor the Lanai ROV precisely to your mission requirements, ensuring that you have the right tools at your disposal to get the job done efficiently and effectively. Durable Construction for Deep-Water Missions The Poseidon M0020 backplate is crafted from 7075 Aluminum, renowned for its exceptional strength and durability. This material not only ensures that the backplate can withstand the rigors of challenging subsea environments but also provides a depth rating in excess of 500 meters. With the M0020 backplate, you can explore deeper and reach areas that were previously beyond your grasp. Seamless Integration with Lanai ROV The M0020 backplate is designed specifically for the Lanai ROV, ensuring a perfect fit and seamless integration. As with all our products, the backplate undergoes rigorous testing and quality assurance procedures to meet our stringent standards. When you choose Poseidon Robotics, you can be confident that every component is engineered with precision and dedication to excellence. Elevate Your Subsea Missions with Poseidon Robotics Our Poseidon M0020 backplate is just one example of our commitment to providing innovative solutions that empower our customers to achieve their goals in subsea exploration. Whether you are conducting scientific research, performing complex inspections, or participating in search and rescue operations, our technology equips you with the tools you need to excel in your mission. Discover the Possibilities Today Explore the limitless possibilities that the Poseidon M0020 backplate brings to your Lanai ROV. Take your subsea operations to new depths and expand your capabilities with ease. Get in touch with Poseidon Robotics today to learn more about our advanced backplate and how it can revolutionize your underwater missions. Choose Poseidon Robotics for Unmatched Performance As the premier provider of subsea robotics and ROV solutions, Poseidon Robotics stands as a trusted partner to professionals worldwide. Our dedication to innovation, quality, and customer satisfaction sets us apart, and we are ready to join you on your journey of discovery beneath the waves. Let us be your guide to unlocking the hidden wonders of the deep ocean.

Revitalizing Wells with Precision: InWaTec Combined’s E-line Re-perforating Services In the lifecycle of an oil or gas well, the need to enhance production or manage reservoir depletion often leads to re-perforating—a strategic intervention aimed at revitalizing well performance. InWaTec Combined's E-line Re-perforating Services leverage the proven efficacy of wireline technology to refine and optimize this crucial process. Wireline, or electric line, has been the traditional mode for deploying perforating guns due to its substantial benefits. The real-time depth control ensures that each perforation is placed with surgical precision, while the selectivity afforded by wireline allows for targeted interventions, focusing on zones with the greatest potential for increased production. Moreover, the reduced logistics of wireline operations, as opposed to tubing deployment, offer a streamlined, cost-effective approach to well servicing. Historically, wireline perforating guns were differentiated based on their use—either as casing guns for pre-completion perforation or through-tubing guns for post-completion jobs. In today's industry, however, this distinction has been transcended. InWaTec Combined has embraced the versatility of wireline to deliver any engineered perforating system, regardless of the well's stage of life, alongside an extensive array of explosive devices. Our E-line Re-perforating Services are not merely about revisiting existing perforations. They represent a strategic re-evaluation and reconfiguration of the well's production strategy. Whether it's addressing areas of the reservoir that were initially bypassed, bypassing damaged perforations, or creating new pathways in depleted zones, our re-perforating services are tailored to meet the unique demands of each well. At InWaTec Combined, we understand that re-perforating is an opportunity to enhance well productivity significantly. Our expert teams, equipped with advanced diagnostic tools, evaluate the well's current status to identify the most promising zones for re-perforation. With this data, we employ the latest in shaped-charge technology and explosive devices, ensuring that new perforations deliver the maximum flow and recovery possible. Choosing InWaTec Combined's E-line Re-perforating Services means entrusting your well's performance to a company that values precision, efficiency, and innovation. Our commitment to excellence ensures that your re-perforating interventions are executed with the highest level of expertise, from planning to execution. Partner with us to revitalize your wells. With InWaTec Combined's E-line Re-perforating Services, you can expect to turn potential into production, optimizing your well's output and extending its productive life. Let us help you unlock the hidden value in your wells, one precise perforation at a time.

Boost Your Business Efficiency with Blower Leasing from CWB National Leasing Streamlining Operations with Flexible and Cost-Effective Equipment Solutions For businesses that require the use of blowers – whether for landscaping, construction, or industrial purposes – having reliable and efficient equipment is key to maintaining productivity. Leasing blowers through Canadian Western Bank (CWB) National Leasing provides an advantageous and financially savvy solution. Here’s how leasing blowers can benefit your business: 1. Rapid Equipment Acquisition CWB National Leasing prioritizes your business needs with a swift leasing process. Decisions are typically made within 48 hours of your application, ensuring that payment is promptly processed. This efficiency means your blowers can be delivered and operational quickly, reducing downtime and enhancing your operational capacity. 2. Enhanced Financial Flexibility Leasing blowers with CWB National Leasing boosts your buying power. By opting for periodic payments over a substantial initial purchase, you can free up capital for other crucial business areas. Additionally, the option to add extra features or accessories to your blowers for a small payment increase allows for customization to meet your specific needs. 3. Balanced Cash Flow Management Smaller lease payments over the term mean that your blowers start contributing to your business’s revenue while they are being paid off. This approach is essential in maintaining a healthy balance between expenses and income, fostering long-term business stability and growth. 4. Flexible Payment Options CWB National Leasing offers a range of payment plans, including seasonal, semi-annual, or annual options, to align with your business’s revenue cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are manageable and aligned with your financial capacity. 5. Potential Tax Benefits Leasing blowers can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax situation. Conclusion Opting to lease blowers through CWB National Leasing is a strategic decision that equips your business with essential equipment while maintaining financial agility. It ensures access to high-quality blowers, vital for efficient operations, without the financial burden of a large upfront investment. This leasing approach paves the way for enhanced operational capabilities, business expansion, and increased profitability.

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required.

Enhance Your Operations with Hydraulic Equipment Leasing from CWB National Leasing Elevate Your Business with Flexible and Efficient Equipment Solutions In the competitive world of construction and industrial operations, having access to advanced hydraulic equipment is key to enhancing efficiency and productivity. Canadian Western Bank (CWB) National Leasing offers a compelling solution for businesses looking to lease hydraulic equipment. Here's how this choice can be a catalyst for growth and efficiency in your business: 1. Swift Access to Hydraulic Equipment Understanding the urgency in your business operations, CWB National Leasing ensures a fast and efficient leasing process. Typically, they notify your equipment dealer about the payment within 48 hours of lease application approval. This prompt service means your hydraulic equipment can be delivered and ready to use quickly, keeping your projects on schedule. 2. Maximized Financial Flexibility Leasing hydraulic equipment with CWB National Leasing boosts your purchasing capacity. Instead of a significant one-time purchase, you can manage finances better with periodic payments. This approach frees up capital for other business needs. Additionally, for a small increase in payments, you can customize your equipment with additional features or accessories, enhancing its functionality. 3. Optimal Cash Flow Management The lease structure allows for smaller payments over the term, enabling the equipment to start contributing to your revenue while it's still being paid off. This strategy is crucial in maintaining a favorable balance between expenses and income. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, to align with your business’s revenue cycle. This flexibility is particularly beneficial for businesses where income may vary throughout the year. 5. Potential Tax Benefits Leasing can offer tax advantages, such as the ability to expense lease payments, as opposed to depreciating the equipment cost. It’s advisable to consult with a tax advisor to explore how leasing can positively impact your business’s tax position. Conclusion Opting to lease hydraulic equipment through CWB National Leasing is a strategic decision that empowers your business with necessary tools while maintaining financial agility. It ensures access to state-of-the-art equipment, essential for efficient and effective operations, without the financial strain of a large upfront investment. This approach paves the way for enhanced operational capabilities, growth, and profitability in your business endeavors.

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.