SMART Team

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

Introducing Safe-T-Whip™ Continuous RD-Short 6’10” (SW-RD-02-S): Unmatched Safety and Reliability for Short Restraint Applications At Safe-T-Whip & Restraints Inc., we take safety seriously, and our commitment to providing the best safety solutions is unwavering. We are thrilled to present our latest innovation - the SW-RD-02-S Safe-T-Whip™ Continuous RD-Short. Designed specifically for regular duty applications that require a shorter restraint, this safety whip offers unmatched protection and reliability for pressurized pipe fittings in the oilfield. Dependable Regular Duty Design: Identified by its eye-catching yellow color and complemented by a yellow tag, SW-RD-02-S Safe-T-Whip™ Continuous RD-Short is meticulously crafted from robust 1/2" 12-Strand HMPE fiber. This reliable safety restraint is engineered for use on 2-inch 1502 hammer union pipelines up to an impressive 15,000psi or 3-inch iron up to 10,000psi. When you need a shorter restraint without compromising on safety, trust Safe-T-Whip™ Continuous RD-Short to deliver. Enhancing Safety with Continuous Restraints: The Safe-T-Whip™ Continuous RD-Short is an integral part of our safety restraint system, designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, minimizing dangerous impacts. Engineered for Maximum Security: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, as well as swivels and joints. Each section is secured by both the upstream and downstream sections of the flowline in the event of failure. However, it is essential to evaluate the piping system to ensure adequate anchoring both upstream and downstream for optimum safety. Certified for Excellence: Safety is our priority, and that's why all Safe-T-Whip™ Restraints and Anchors are thoroughly tested and certified to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatile and Effective: The Safe-T-Whip™ Continuous RD-Short is a variation of restraint designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. This versatility allows you to tailor your safety configuration to your specific needs, ensuring the highest level of protection for your operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous RD-Short is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous RD-Short, you can rest assured that your operations are protected from catastrophic failures. Invest in Unparalleled Safety: SW-RD-02-S Safe-T-Whip™ Continuous RD-Short is the ultimate safety restraint for short applications. Trust in the power of Safe-T-Whip™ to safeguard your workforce, equipment, and operations. With Safe-T-Whip & Restraints Inc., safety is always at the forefront. Contact us to learn more and secure your Safe-T-Whip™ Continuous RD-Short today.

Introducing BMS VerSol T: The Safe and Versatile Solution for Your Cleaning Needs Cleanstream presents BMS VerSol T, the perfect replacement for harmful solvents such as NMP/NEP, glycols, and aromatics. Our solvent is designed to provide a more sustainable and safer alternative to traditional solvents that contain BTEX. BMS VerSol T is a chemical product that is fully miscible in water and/or acid and has no CLP labeling. This makes it a safe and versatile solution for your cleaning needs. Our product is a green Xylene replacement that is much safer to use and provides exceptional cleaning performance without any of the negative environmental effects of traditional solvents. In addition to being safe for the environment, BMS VerSol T is highly effective in cleaning corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is specially formulated to provide the same level of cleaning performance as traditional solvents without any of the harmful effects. BMS VerSol T is also a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative environmental effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol T is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol T today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol T and start cleaning with confidence.

Secure and Efficient Charging with the CSA 12 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 12 Unit Locking FAST Charger Rack (Part # NWI-NWCR-12BLC), a compact yet powerful charging solution designed for the efficient management of mining and industrial lighting equipment. This charger rack combines fast charging capability with enhanced security, making it an ideal choice for smaller teams or tight spaces. Fast Charging for Essential Equipment Designed to keep pace with the demanding schedules of modern mining and industrial operations, the CSA charger rack offers rapid charging times of 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This quick turnaround ensures your equipment is ready to go when you are, reducing downtime and boosting productivity. Locking Feature for Added Security One of the key advantages of the CSA 12 Unit Charger Rack is its locking mechanism. This feature provides added security for your valuable equipment, ensuring it remains safe and secure while charging. Ideal for locations where additional protection is desired, the locking rack is a safeguard against unauthorized access or removal of the equipment. Compact Design for Space Efficiency The compact size of the CSA 12 Unit Charger Rack is perfect for operations where space is at a premium. It’s designed to be single-sided, making it easy to place in equipment rooms, workshops, or mobile units, maximizing space utility without compromising on charging capacity. Durable and Reliable Built to withstand the harsh environments typical of mining and industrial settings, the CSA charger rack is durable and reliable. Its robust construction guarantees long-term performance, representing a smart investment for operations focused on efficiency and security. Ideal for Smaller Teams or Limited Spaces This charging solution is particularly well-suited for smaller mining crews, construction teams, or rental fleets. It allows for the management of multiple devices without needing a large amount of space, making it a versatile choice for various operational sizes and types. Upgrade Your Charging Station Today The Wisdom CSA 12 Unit Locking FAST Charger Rack is available now at Provix. Enhance your equipment management with this efficient, secure, and space-saving solution. Visit www.provix.net to learn more and bring advanced charging capabilities to your operation.

Unleash Precision Welding with Canaweld's TIG Torch 200 AMP Gas Valve Air Cooled (26 Series)! For the oil and gas industry, precision welding is not just a requirement; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our TIG Torch 200 AMP Gas Valve Air Cooled (26 Series) is a testament to our commitment to excellence and innovation. Unmatched Flexibility: When it comes to hard-to-reach applications, our TIG Torch 200 AMP is the ultimate solution. The torch body can be bent to virtually any position, ensuring quick and easy access to even the most difficult positional welds. No more struggling with tight spaces; our torch provides unmatched flexibility, making precision welding a breeze. Revolutionary Cooling Technology: We've harnessed the power of Force Cooling Technology to maximize the performance and longevity of our torch. Highly effective passages and wells force cool the collet, resulting in a cooler running torch with increased conductivity and extended consumable life. Weld with confidence, knowing that our torch can handle even the most demanding applications. Heat Zone Isolation for Superior Performance: Our torch employs Heat Zone Isolation Technology, where transferred heat is isolated by a unique external barrier. Conducted heat is further isolated using large air pockets within the torch body structure. The result? Cooler running torches with increased power to weight performance ratios. Experience welding at elevated power levels without compromising performance. Superior Wear Parts for Increased Arc Time: Every component of our torch is designed for superior performance, delivering increased arc time and lower overall production costs. From push-on/easy grip ceramics to one-piece collet/collet body for hassle-free use, our torch ensures 100% ceramic and electrode alignment with the Heat Zone Isolator. Optional large gas lens increases the gas envelope for even more efficiency. Advanced Torch Bodies and Back Caps: Experience a step-change in performance levels with our torch bodies and back caps. Our revolutionary cooling and heat zone isolation techniques result in cooler running torch bodies at elevated power levels. These cooler running components increase wear parts' life expectancy, giving you an edge in productivity. Key Benefits for Enhanced Performance: • Utilizes air gap technology for cooler running handles • Hard and soft material elements for an effortless grip • Infinite adjustment of welding parameters from the torch handle • Optional integrated handle readout displays all welding and machine parameters in "real-time" Clever Cable Systems for Optimal Efficiency: Our cable systems are cleverly designed to combine flexibility, durability, and top-notch performance. Rapid fit and modular rear-end systems ensure easy reconfiguration of power input, gas hose, and control lead terminations. Superior-grade rubbers guarantee cable termination integrity and hose package longevity, tested to withstand over 1 million flexes. Elevate Your Welding Experience: Experience the difference with Canaweld's TIG Torch 200 AMP Gas Valve Air Cooled (26 Series). Achieve precision welding with ease, no matter how challenging the application. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers. When it comes to welding, choose Canaweld for the ultimate in quality, flexibility, and performance. Elevate your welding experience and take your oil and gas projects to new heights of success with Canaweld's cutting-edge welding accessories.

At Houston Digital Instruments (HDI), we are committed to providing cutting-edge measurement solutions to our customers. While we have replaced the HDI M100 Pressure Gauge with our latest innovation, the HDI 2000P, we understand that there are still existing installations of the M100 in the field. That's why we continue to offer parts and services to ensure ongoing support for your equipment. Reliable Performance in a Compact Design: The HDI M100 Pressure Gauge, though discontinued, has left a lasting legacy of dependable performance. This battery-powered gauge features a solid-state platform with no fluids or moving parts, providing accurate pressure measurements in a compact and robust package. With pressure ranges of 6,000 psi, 10,000 psi, and 16,000 psi, you can select the configuration that suits your specific needs. Field Repairable and Battery Powered: The M100 Pressure Gauge is designed for easy maintenance and minimal downtime. If repairs are ever needed, our field repairable system ensures that you can quickly address any issues and keep your operations running smoothly. The low battery indicator keeps you informed of the gauge's power status, allowing for timely battery replacements and uninterrupted monitoring. Versatile Connectivity Options: We understand that different applications require different connection types. The M100 offers various connection options, including 2" Male NPT, 2" 1502, 2" 2202, or flanged connections. This flexibility allows you to seamlessly integrate the gauge into your existing setup. Additionally, the M100 provides 4-20mA or 0-1 volt output options, enabling compatibility with your preferred data acquisition systems. Enhanced Visibility and Durability: In demanding environments where vibrations are present, the M100 Pressure Gauge demonstrates consistent performance. Its solid-state design ensures resistance to high vibration environments, ensuring accurate and reliable pressure readings. The analog bar graph with a divided scale provides clear and intuitive visualization, even in challenging conditions. Future-Proof Your Measurement Solutions: While the HDI M100 Pressure Gauge may have reached the end of its production cycle, we are excited to introduce its successor, the HDI 2000P. This advanced pressure gauge system offers enhanced features, improved accuracy, and expanded configuration options. Our dedicated team is ready to assist you in transitioning to the HDI 2000P, providing a seamless upgrade to your pressure measurement capabilities. Continued Support for Existing Installations: We understand the importance of maintaining and servicing existing equipment. Even though the M100 Pressure Gauge is no longer in production, we are committed to supporting our customers who rely on this legacy product. Our comprehensive parts inventory and expert technicians ensure that you can access the necessary resources to keep your M100 Pressure Gauge operational. For any inquiries, parts, or service requests related to the HDI M100 Pressure Gauge, please reach out to our dedicated support team. We are here to assist you in maximizing the lifespan and performance of your equipment. Houston Digital Instruments remains dedicated to providing innovative, reliable, and future-proof measurement solutions. Trust us to deliver excellence in measurement technology, ensuring your continued success in a dynamic industry.

Unleash the Power of Precision: The Newton Grabber by Poseidon Robotics At Poseidon Robotics, we're dedicated to revolutionizing subsea exploration and robotics. Our commitment to innovation has led to the supply of cutting-edge products, and today, we're thrilled to introduce the Newton Grabber, a game-changer in the world of subsea robotics. A Seamless Solution for Enhanced Operations The Newton Grabber is engineered to elevate the capabilities of the BlueROV2 and other subsea vehicles by providing them with the ability to interact with the subsea environment like never before. Whether it's retrieving objects, attaching recovery lines, or freeing a snagged tether, the Newton Gripper delivers unmatched precision and performance, making it an invaluable tool for underwater missions. Intelligent Design: Functionality without Compromise One of the standout features of the Newton Grabber is its intelligent design that seamlessly integrates with your subsea operations. We understand that during certain missions, the grabber might be in the way. To address this, our innovative design allows you to hide the Newton Grabber inside the frame, under the buoyancy. No need for disconnection or removing valuable components; simply tuck it away and continue with your operation without interruption. Versatility at its Best The Newton Grabber is a versatile tool that suits a wide range of subsea applications. From delicate maneuvers to robust tasks, the grabber's capabilities adapt to the requirements of your mission. Its ability to retrieve objects and interact with the subsea environment opens up endless possibilities for scientific research, inspection, search and rescue operations, and more. Ease of Installation and Everything You Need Poseidon Robotics prioritizes simplicity and efficiency in every aspect, including installation. The Newton Grabber comes complete with everything needed for seamless installation on the BlueROV2. It has been meticulously designed the system to ensure a hassle-free integration process, allowing you to get your subsea vehicle up and running quickly. Experience Poseidon Robotics Quality As pioneers in subsea robotics, Poseidon Robotics consistently delivers products that redefine industry standards. The Newton Grabber is no exception, setting a new benchmark for performance, reliability, and versatility. Designed to endure the harshest underwater conditions, this grabber is engineered to withstand the demands of challenging subsea operations. Unlock New Possibilities with the Newton Grabber Are you ready to take your subsea operations to the next level? Unlock the full potential of your BlueROV2 or subsea vehicle with the Newton Grabber. Reach out to us today, and let our team of experts assist you in choosing the perfect solution for your specific needs. Experience the power of precision and elevate your subsea exploration with Poseidon Robotics.

Enhance Your Workspace with Desk Leasing from CWB National Leasing Creating an Efficient and Productive Office Environment with Flexible Furnishing Solutions For businesses looking to create or revamp their office spaces, having the right desks is crucial for ensuring a productive and comfortable work environment. Leasing desks through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to optimize their workspace. Here’s how leasing desks can benefit your business: 1. Quick Access to Modern Office Furniture CWB National Leasing values the importance of a well-equipped office space in enhancing productivity. They offer a fast leasing process, with decisions typically made within 48 hours of your application. This rapid service ensures that your desks can be delivered and set up quickly, transforming your office space without significant delays. 2. Increased Financial Flexibility Leasing desks with CWB National Leasing enhances your financial power. It allows you to conserve capital by opting for periodic payments over a large upfront purchase. The flexibility to add extra features or accessories to your desks for a small payment increase allows for customization to meet specific office needs and ergonomic considerations. 3. Effective Cash Flow Management Manageable lease payments over the term mean your desks start contributing to your business’s efficiency while they're being paid off. This approach helps maintain a balanced expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing desks can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease desks through CWB National Leasing is a strategic decision that equips your business with essential office furniture while maintaining financial flexibility. It ensures access to high-quality desks, vital for creating a productive and comfortable working environment, without the financial strain of a large upfront investment. This leasing approach enables enhanced office aesthetics, improved employee comfort, and increased overall productivity, helping your business to thrive in a competitive corporate landscape.

Optimize Your Downhole Retrieval Operations with HOCA Oil Tools' Shear Down External Fishing Neck Pulling Tools In the intricate world of oilfield operations, ensuring seamless downhole tool retrieval is pivotal for maintaining efficiency and minimizing downtime. HOCA Oil Tools, a specialist in crafting superior downhole slick line tools, proudly presents its Shear Down External Fishing Neck Pulling Tools. These tools are engineered with precision to facilitate the secure and efficient retrieval of subsurface equipment, enhancing operational effectiveness and safety. HOCA’s Shear Down External Fishing Neck Pulling Tools: Precision Engineered for Enhanced Retrieval Our Shear Down External Fishing Neck Pulling Tools are designed for operators who demand reliability and precision in their downhole activities. Built to engage and retrieve subsurface equipment with external fishing necks, these tools are essential for operations requiring the removal of downhole instruments. Equipped with a shear-down mechanism, these pulling tools allow for disengagement in scenarios where the retrieved equipment becomes immovably stuck, thereby ensuring the safety and continuity of operations. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with downhole solutions that meet the demands of modern well operations. Our Shear Down External Fishing Neck Pulling Tools represent our commitment to innovation, quality, and customer satisfaction. Whether you are addressing routine retrieval tasks or facing complex downhole challenges, our tools are designed to enhance the efficiency, safety, and success of your operations. By incorporating our Shear Down External Fishing Neck Pulling Tools into your downhole toolkit, you are choosing a product that delivers on the promise of operational excellence. With HOCA Oil Tools, you gain not just a supplier, but a partner committed to supporting your success with state-of-the-art solutions and expert service. Choose HOCA Oil Tools for your downhole needs and take the first step towards more efficient, safe, and cost-effective retrieval operations. Elevate your downhole performance with HOCA Oil Tools – where innovation, quality, and reliability come together to drive your success.

Empowering Energy Excellence: Harnessing Digital Twin Technology with ELEKS In the dynamic landscape of the energy sector, innovation is the catalyst for success. ELEKS stands at the forefront of this innovation wave, armed with the power of highly innovative digital twin technology. Imagine a world where you can not only visualize your assets but also simulate their behavior accurately across various scenarios, predicting and optimizing their performance. This is the realm where our engineering prowess shines, crafting software solutions that seamlessly integrate advanced digital twin technology with the prowess of IoT and machine learning. Welcome to a future where data becomes insight, insight becomes action, and your energy operations transcend the ordinary. The Power of Digital Twin Technology: Your Pathway to Excellence Asset Visualization and Simulation: ELEKS' digital twin technology allows you to visualize your assets in unprecedented detail and simulate their behavior across a spectrum of conditions. This empowers you to foresee potential challenges and optimize performance proactively. Data Integration: Our engineers craft software solutions that bring together advanced digital twin software, IoT, and machine learning capabilities. This combination enables you to capture data from various sources, creating a comprehensive and interconnected view of your energy landscape. Real-time Tracking: Track energy usage, operational conditions, and KPIs in real time. ELEKS' solutions ensure that you're not just collecting data – you're gaining actionable insights that drive informed decision-making. Predictive Analytics: Take your energy management to a new dimension by feeding your data to machine learning models. Predictive analytics become your tool for demand response (DR) management, energy optimization, and risk mitigation. Demand Response (DR) Management: With predictive insights at your fingertips, DR management becomes more efficient and targeted. Respond dynamically to fluctuations in energy demand, ensuring optimal resource allocation. Energy Management Reinvented: Leverage predictive analytics to optimize your energy management strategies. Allocate resources intelligently, reduce waste, and enhance your overall efficiency. Risk Management Made Smarter: Digital twin technology, IoT, and machine learning converge to provide you with comprehensive risk insights. Identify potential risks before they escalate, safeguarding your operations and minimizing disruptions. Elevate Your Energy Operations with ELEKS At ELEKS, we don't just create software – we empower transformation. Our energy sector technology expertise doesn't just offer solutions; it unlocks new horizons of efficiency, accuracy, and innovation. The convergence of digital twin technology, IoT, and machine learning elevates your energy landscape to a realm of unparalleled insight and foresight. Join us in shaping the future of energy, where data becomes the foundation of intelligent decisions, and innovation paves the way for success. With ELEKS, you're not just embracing technology – you're embracing transformation. Step into a world where digital twin technology becomes your compass, guiding you towards operational excellence and a sustainable energy future.

Canaweld: Your All-In-One Solution for Oil and Gas Welding When it comes to welding machines and accessories for the oil and gas industry, Canaweld stands out as a leading expert. Our multi-process welding machines are designed to cater to all your welding needs, providing a comprehensive range of capabilities to handle various welding processes with ease. From MIG welding to TIG welding, Stick welding to Flux Cored welding, our multi-process welders are the ultimate all-in-one solution for your welding projects. Unmatched Variety, Unbeatable Quality At Canaweld, we take pride in offering a wide range of multi-process welders to meet the diverse needs of the oil and gas industry. Our production lines include industrial heavy-duty multi-process welders, high-tech (programmable, LCD panel, Synergic, or pulse) multi-process welders, and portable multi-process welders. Whatever your welding requirements, we have the perfect welding machine to match your needs. Versatility to Handle Various Materials Our multi-process welders are engineered to tackle a wide range of materials commonly used in the oil and gas industry. From mild steel and stainless steel to aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys, our machines are equipped to handle it all. Professional-Grade Wire-Feeding Mechanisms We understand that a robust and reliable wire-feeding mechanism is crucial for seamless welding operations. That's why all our multi-process welders are equipped with professional, heavy-duty wire-feeding mechanisms to ensure smooth and consistent wire feed, reducing downtime and improving efficiency. Introducing the Multiprocess 5000: The Workhorse for Medium to Heavy-Duty Applications The Multiprocess 5000 is a powerful 400-Amps welding machine that takes welding to a whole new level. Capable of Stick welding, MIG welding, Flux cored welding, or TIG welding with a lift start, this robust and reliable workhorse is the perfect companion for all your medium to heavy-duty applications. Engineered for Tough Conditions Designed to withstand the harshest conditions, the Multiprocess 5000 is a true workhorse. Its heavy-duty, robust design ensures reliability, making it a dependable partner in the most demanding environments. Unparalleled Performance With high power at 100% duty cycle and tested in extreme temperatures of 104°F/40°C and 140°F/60°C, the Multiprocess 5000 delivers exceptional welding quality, precise arc striking, and a highly stable arc. Its fully encapsulated PCB protects against dust contamination, ensuring continuous performance even in challenging conditions. Optimal Welding Control The Multiprocess 5000 features automatic compensation for main power fluctuations within ± 20% and electronic continuous control of inductance, ensuring trouble-free welding and excellent CC/CV characteristics. Whether you're engaging in MIG/MAG, Flux-cored, or Stick welding (MMA), this machine offers exceptional welding characteristics. User-Friendly and Worry-Free Setting parameters is a breeze with the Multiprocess 5000's user-friendly design. It includes initial and final crater control for precise welding results and comes with a comprehensive 3-year warranty, giving you peace of mind and confidence in your investment. Choose Canaweld: Your Trusted Welding Partner Experience the power, versatility, and reliability of Canaweld's multi-process welding machines. From the oil and gas industry to various industrial applications, our welding solutions have been trusted by professionals worldwide. When it comes to welding machines and accessories, Canaweld is the name you can trust. Unlock the potential of your welding projects with Canaweld's cutting-edge technology and exceptional performance. Invest in a welding machine that delivers superior results and choose Canaweld for all your welding needs.

Navigating Offshore Challenges with InWaTec Combined’s Offshore Mini-Coil Services Offshore oil and gas operations come with a unique set of logistical challenges. In the face of limited deck space and crane capacity, traditional coiled tubing units (CTUs) often fall short in providing the necessary services without compromising operational economics. InWaTec Combined rises to the occasion with our Offshore Mini-Coil Services, designed to deliver efficient, cost-effective well intervention and maintenance solutions in even the most constrained offshore environments. Compact Efficiency: Our capillary/mini-coil CTU is a game-changer for offshore operations. Its compact design minimizes the footprint on the deck, providing a practical alternative to bulkier traditional units. This space-efficient solution is crucial on platforms where every square foot counts. Lift and Load Advantages: The lightweight nature of our Mini-Coil CTU addresses the common challenges of crane limitations. With the reduced load requirements, our Mini-Coil equipment can be easily maneuvered and set up, facilitating a range of well services without the need for heavy lifting equipment. Versatile Applications: Despite its compact size, the Mini-Coil CTU is robust in capabilities. It's adept at a multitude of tasks, from precision interventions like chemical treatments and scale removal to essential maintenance procedures and even wellbore cleanouts. Economic Solution: InWaTec Combined’s Offshore Mini-Coil Services are not just operationally advantageous; they also present significant cost savings. The reduced logistical demands coupled with the efficiency of our Mini-Coil operations translate into a more economical approach to servicing wells offshore. Customized Service Delivery: Understanding that no two wells or offshore platforms are the same, we offer customized Mini-Coil solutions tailored to the specific requirements of each operation. Our team of experts meticulously plans every aspect of the service delivery, ensuring that it aligns perfectly with our clients' operational and economic objectives. At InWaTec Combined, we are committed to innovation and excellence in offshore well services. Our Offshore Mini-Coil Services embody this commitment, providing operators with the assurance that even under the constraints of limited deck space and crane capacity, their wells can be serviced efficiently and effectively. Choose InWaTec Combined for your offshore well interventions, and experience the strategic advantage of our Offshore Mini-Coil Services. We are dedicated to optimizing your operations, ensuring that your offshore wells maintain peak performance with minimal disruption. Let us bring our compact, powerful solutions to your platform, where space is at a premium, but potential is limitless.

Illuminate Your World with the Wisdom Lamp 4A Retail Blister Pack – Now at Provix Provix is delighted to present the Wisdom Lamp 4A Retail Blister Pack, the ultimate lighting solution for a range of activities. Whether you're into rock climbing, night fishing, diving, or need reliable lighting for construction and emergency rescue, the Lamp 4A is your go-to source of illumination. Complete Package for Versatile Use The Lamp 4A Retail Blister Pack includes a 3A or 4A Cap Lamp, a magnetic USB charger, and a head strap. This comprehensive package offers everything you need for hands-free lighting in various environments. The easy-to-use head strap ensures the lamp stays secure, whether you're scaling a cliff or navigating a dark construction site. User-Friendly and Efficient Charging Charging the Lamp 4A is hassle-free. Simply connect the magnetic head to the lamp's charging interface and the USB connector to a Wisdom power adapter or any USB port. This flexibility allows you to charge your lamp at home, in the office, or even in your car. Outstanding Technical Specifications The Lamp 4A boasts impressive technical data, ensuring it meets your lighting needs: • Rated Capacity: 7,000mAh • Rated Voltage: 3.7V • LED Working Current: HI 1,400 mA, ME 570 mA, LO 80 mA • Initial Lighting Degree in 1m: HI 25,000 lx, ME 12,000 lx, LO 1,800 lx • Light Luminous Flux: HI 533 lm, ME 265 lm, LO 50 lm • Continuous Discharging Time: HI 5 hours, ME 13 hours, LO 60 hours • Light Power: HI 4.2W, ME 1.17W, LO 0.24W • Charging Time: 5 hours • Weight: 169g (5.96 oz) • Dimensions: 84x69x50mm (3.3x2.7x2.0in) Safety and Durability With a short circuit protection time of less than 320μs and a battery lifespan of 1,200 cycles, the Lamp 4A is not only safe but also durable. Its robust construction ensures it can withstand the rigors of various activities and work environments. Your Ideal Companion for Any Adventure or Task The Wisdom Lamp 4A Retail Blister Pack is an essential tool for anyone needing reliable and versatile lighting. Available now at Provix, this pack is perfect for all your adventures and professional tasks. Visit www.provix.net to learn more and get your hands on this indispensable lighting solution.

Advancing Well Integrity with InWaTec Combined’s Ultra-Sonic Inspection Tool Services In the pursuit of operational excellence within the oil and gas industry, maintaining the integrity of well infrastructure is paramount. InWaTec Combined is proud to present our Ultra-Sonic Inspection Tool (USIT) Services, a cutting-edge solution for comprehensive cement evaluation, casing inspection, and integrity assessment. The USIT is a marvel of diagnostic precision, utilizing a single transducer mounted on an Ultrasonic Rotating Sub (USRS) at the tool's base. This sophisticated apparatus emits ultrasonic pulses ranging from 200 to 700 kHz, meticulously recording the waveforms reflected from both internal and external casing interfaces. The decay rate of these waveforms is a direct indicator of the cement bond's quality, while the resonant frequency readings of the casing yield accurate wall thickness measurements—critical data for assessing pipe integrity. Thanks to the transducer's placement on the rotating sub, our USIT Services ensure a full 360° scan of the casing circumference, leaving no aspect of the wellbore unexamined. This comprehensive coverage is pivotal for evaluating cement bond quality and determining the condition of the casing with unmatched precision. Our tool’s high angular and vertical resolutions can detect even the narrowest channels, down to 1.2 inches in width, providing a detailed assessment of well integrity. Our real-time data acquisition and analysis at the wellsite generate self-explanatory maps and valuable metrics, including cement bond logs, casing thickness, internal and external radii. These insights are indispensable for: Cement evaluation to ensure zonal isolation and well integrity. Casing inspection to ascertain ongoing wellbore stability. Corrosion detection and monitoring to prevent potential well failures. Identification of internal and external damage or deformation, safeguarding against unexpected operational hazards. Casing thickness analysis, crucial for calculating collapse and burst pressure parameters and prolonging the life of the well. InWaTec Combined's USIT Services are not just diagnostic tools—they are a testament to our commitment to safeguarding our clients' assets and optimizing well performance. By embracing our Ultra-Sonic Inspection Tool Services, operators gain the assurance that their wells remain robust, compliant, and productive throughout their lifecycle. In an industry where well integrity is synonymous with operational success, InWaTec Combined stands as your sentinel of safety and efficiency. Deploy our USIT Services, and harness the power of precision ultrasonic technology to illuminate the unseen, ensuring your operations are secure from the inside out.

Introducing Xantham Gum from Cleanstream – the versatile solution for your drilling and completion needs. As a leader in providing innovative and environmentally responsible solutions for the oil and gas industry, Cleanstream is proud to offer this unique polymer for rheology modification, hole cleaning, and solids suspension. What sets Xantham Gum apart is its ability to provide excellent friction reduction – a feature that is unmatched by most other polymers in oilfield drilling and completion applications. Additionally, it can be used in most types of water-based fluids, making it an incredibly versatile product for your operations. Our in-house laboratory facilities allow us to determine the right approach to solve your specific problem. And at Cleanstream, we are committed to developing eco-friendly solutions for as many applications as possible. Whether you need Xantham Gum for a specific project or require our personnel and equipment for complete execution, we have you covered. Click on the datasheet for more information or contact us to learn how Xantham Gum can benefit your operations. Trust Cleanstream for innovative and sustainable solutions for your oil and gas needs.

The FH™ is the industry-standard, hydrostatic-set and shear-release single-string retrievable packer. It can be used in the following applications: production, injection, and zonal isolation; single-string selective completions or dual-string completions with multiple packers; deviated wells or other applications when rotation for installation or removal is not beneficial; when it is beneficial to displace and set packers after the well is flanged up; when testing the tubing string before packer setting or to independently set and test individual packers in multiple packer completions is beneficial. The FH packer is hydraulically activated by applying tubing pressure against a plugging device below the packer. The packer requires only straight pull to release. The FHL™ is the large-bore version of the FH packer. Features, advantages and operational procedures are the same as those for the FH packers Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; Baker Hughes low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917)

OH-BGE Bilge Absorbent Boom is engineered to address the specific challenges of oil accumulation in the bilge, arising from engine leaks and oil changes. With its unique design and technical specifications, this product is your ally in safeguarding the environment. Technical Specifications: Part Number: OH-BGE Product Type: Absorbent Bilge Fluids Absorbed: Oil-Based Liquids Volume Absorbed per Unit: 1.59 gallons Color/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Neutralizing: No Floating: Yes UV Resistant: No Size: 10” x 44” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes Applications: • Marine vessels • Boats • Oil-powered machinery In the maritime tapestry where vessels traverse vast waters, a silent guardian emerges—the OH-BGE Bilge Absorbent Boom. Beyond its utilitarian role, this product narrates a story of efficiency, environmental consciousness, and unwavering commitment to technical excellence. Can is known for its testament to precision in oil cleanup. Meticulously crafted, it targets oil floating in the bilge, whether a result of engine leaks or the aftermath of oil changes. A Polypropylene Filler ensures optimal absorption, leaving the bilge spotless and safeguarding marine environments from potential contamination. Very handy to learn that the OH-BGE, equipped with an integrated loop of rope, effortlessly finds its place in the bilge. This seamless application isn't merely convenient; it's a strategic move to efficiently absorb oil before water circulates back to the ocean, lake, or river. Choosing the OH-BGE isn't merely a cleanup decision; it's a commitment to safeguarding our waters. This absorbent boom becomes a catalyst for environmental protection, actively contributing to the preservation of aquatic ecosystems. With every use, it signifies a pledge to a cleaner and more sustainable maritime future. the OH-BGE becomes an investment in environmental stewardship. It transcends being a product and emerges as a strategic choice for compliance with rigorous environmental regulations. This proactive step shields against potential fines tied to oil pollution, aligning fiscal prudence with ecological responsibility. OH-BGE orchestrates a symphony of technical prowess. Tailor-made with a specific size of 10” x 44” and an impressive volume absorption of 1.59 gallons per unit, it becomes an exemplar of efficient and targeted oil cleanup in the bilge. This isn't just a boom; it's a harmonious blend of technical excellence and environmental responsibility. Choose OH-BGE – where every ripple narrates a tale of environmental stewardship.

Tailor-Made Gas Solutions: Your Trusted Partner for Mobile Gas At Lovat Gas Solutions, we understand that every gas-related application is unique. That's why we leverage our extensive experience and expertise to develop tailor-made solutions that perfectly match your specific needs. Whether it's volume, application, duration, or location, we consider all the relevant factors to deliver the best solution for your job. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With years of industry experience, our team has a deep understanding of gas-related challenges and requirements. We have successfully designed and executed numerous projects across various sectors, earning the trust and loyalty of our customers. 2. Customized Approach: We believe in the power of customization. By considering your specific requirements, we develop fit-for-purpose solutions that precisely address your needs. Our solutions are not one-size-fits-all; they are carefully tailored to ensure optimal performance and efficiency for your application. 3. Quality Solutions: Our commitment to quality is unwavering. We take pride in delivering solutions that meet the highest standards of performance, safety, and reliability. When you choose Lovat Gas Solutions, you can trust that our fit-for-purpose solutions will exceed your expectations and deliver exceptional results. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We prioritize open communication and collaboration to ensure that we fully understand your objectives and challenges. Our dedicated team goes the extra mile to provide personalized service and support, making us the first call for our customers whenever they need mobile gas solutions. Contact Lovat Gas Solutions today and discover how we can help you with your mobile gas needs. We are confident that our tailor-made solutions will exceed your expectations, and one job is all it takes for you to experience the excellence of Lovat Gas Solutions. Let us be your trusted partner in delivering exceptional gas solutions that drive the success of your operations. Together, we will find the perfect fit for your gas requirements with Lovat Gas Solutions.

Advancing Well Integrity with InWaTec Combined’s Ultra-Sonic Inspection Tool Services In the pursuit of operational excellence within the oil and gas industry, maintaining the integrity of well infrastructure is paramount. InWaTec Combined is proud to present our Ultra-Sonic Inspection Tool (USIT) Services, a cutting-edge solution for comprehensive cement evaluation, casing inspection, and integrity assessment. The USIT is a marvel of diagnostic precision, utilizing a single transducer mounted on an Ultrasonic Rotating Sub (USRS) at the tool's base. This sophisticated apparatus emits ultrasonic pulses ranging from 200 to 700 kHz, meticulously recording the waveforms reflected from both internal and external casing interfaces. The decay rate of these waveforms is a direct indicator of the cement bond's quality, while the resonant frequency readings of the casing yield accurate wall thickness measurements—critical data for assessing pipe integrity. Thanks to the transducer's placement on the rotating sub, our USIT Services ensure a full 360° scan of the casing circumference, leaving no aspect of the wellbore unexamined. This comprehensive coverage is pivotal for evaluating cement bond quality and determining the condition of the casing with unmatched precision. Our tool’s high angular and vertical resolutions can detect even the narrowest channels, down to 1.2 inches in width, providing a detailed assessment of well integrity. Our real-time data acquisition and analysis at the wellsite generate self-explanatory maps and valuable metrics, including cement bond logs, casing thickness, internal and external radii. These insights are indispensable for: Cement evaluation to ensure zonal isolation and well integrity. Casing inspection to ascertain ongoing wellbore stability. Corrosion detection and monitoring to prevent potential well failures. Identification of internal and external damage or deformation, safeguarding against unexpected operational hazards. Casing thickness analysis, crucial for calculating collapse and burst pressure parameters and prolonging the life of the well. InWaTec Combined's USIT Services are not just diagnostic tools—they are a testament to our commitment to safeguarding our clients' assets and optimizing well performance. By embracing our Ultra-Sonic Inspection Tool Services, operators gain the assurance that their wells remain robust, compliant, and productive throughout their lifecycle. In an industry where well integrity is synonymous with operational success, InWaTec Combined stands as your sentinel of safety and efficiency. Deploy our USIT Services, and harness the power of precision ultrasonic technology to illuminate the unseen, ensuring your operations are secure from the inside out.