HDI 2522 Choke Position Indicator System

Introducing the Magna Range Bridge Plug from ID OilTools – the ultimate solution to passing restrictions and securely setting in larger tubing or casing. Our plug has been specially designed to handle differential pressures of up to 10,000psi at 350°F, making it the perfect choice for your downhole operations. Due to the extended setting range this plug has no pressure rating and as such the differential pressures are not guaranteed, even though the plug has passed several tests in these conditions. What sets our plug apart is its extended setting range, which allows it to pass through restricted I.D. tubing, saving you valuable time and money. With case-hardened slips above and below a three-piece nitrile rubber pack-off system, our plug is designed to maintain a constant sealing pressure. The slips are specially heat-treated to ensure a secure anchoring even in P-110 casing, with a hard outer layer for gripping and a soft inner layer for easier milling. To ensure centered setting of the small diameter plug in large I.D. pipe, our Magna Range Plug features ribbed cones that direct the slips to evenly spaced positions against the pipe. And should it be necessary to remove the plug after setting, a milling process is recommended as the plug is constructed of mild steel and is not considered drillable. Don't compromise on quality and reliability when it comes to your downhole operations. Choose the Magna Range Bridge Plug from ID OilTools, and experience the ultimate in performance and efficiency.

There are many different types of dump trucks available including; Standard Dump Truck, Tri-Axle Dump Truck, Superdump Truck, Truck & Transfer, Dump Trailer, Semi-End Dump Truck, Side Dump Truck, Bottom Dump, Belly Dump, Double Bottom, Double Belly Dump. From hauling material to removing demolition waste, these dump trucks help sites effectively create a clear workspace for any project.

The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility.

A solar panel, or solar module, is one component of a photovoltaic system. They are constructed out of a series of photovoltaic cells arranged into a panel. They come in a variety of rectangular shapes and are installed in combination to generate electricity. Solar panels are comprised of several individual solar cells which are themselves composed of layers of silicon, phosphorous (which provides the negative charge), and boron (which provides the positive charge). Solar panels absorb the photons and in doing so initiate an electric current. The resulting energy generated from photons striking the surface of the solar panel allows electrons to be knocked out of their atomic orbits and released into the electric field generated by the solar cells which then pull these free electrons into a directional current. This entire process is known as the Photovoltaic Effect.

Introducing the JWN Jet Wash Nozzle from Marlin Oil Tools: A Revolution in Well Intervention and Perforation Technology Marlin Oil Tools is proud to unveil the JWN Jet Wash Nozzle, an advanced downhole tool specifically engineered for precision well intervention and perforation tasks. As a critical component of the Bottom Hole Assembly (BHA), the JWN Jet Wash Nozzle is designed to enhance the efficiency of perforating casing or tubing by utilizing a high-speed jet of a gel-sand mixture directed at the well's inner casing wall. Here’s why the JWN Jet Wash Nozzle is a game-changer in the oil and gas industry. Key Features of the JWN Jet Wash Nozzle: Precision Perforation: The JWN Jet Wash Nozzle delivers a high-velocity jet stream of a gel-sand mixture, enabling precise and efficient perforation of the casing or tubing. Abrasive-Resistant Materials: Constructed from materials that resist wear from abrasive particles, ensuring longevity and reliability under harsh downhole conditions. Versatile Design Options: Available in a basic design for continuous circulation or a ball-activated design that opens nozzles only after a ball drop, providing flexibility for specific operational needs. Enhanced Well Productivity: By performing abrasive cuts through metal, cement, and part of the surrounding rock, the JWN enhances well connectivity and productivity. Seamless BHA Integration: Designed to run in hole as part of the BHA alongside other downhole tools, the JWN Jet Wash Nozzle is compatible with a wide range of well intervention equipment. Elevate your well intervention and perforation operations with the JWN Jet Wash Nozzle from Marlin Oil Tools, a leading-edge solution designed for optimal efficiency and precision in the oil and gas sector. Featuring abrasive-resistant nozzles and a high-speed gel-sand mixture jet, the JWN Jet Wash Nozzle precisely perforates casing and tubing, improving well productivity. With options for continuous circulation or ball-activated operation, this tool offers unparalleled flexibility and durability for your well intervention needs. Choose the JWN Jet Wash Nozzle for a reliable, efficient, and versatile solution in enhancing well connectivity and output. Why Choose the JWN Jet Wash Nozzle from Marlin Oil Tools? Targeted Perforation: Achieves precise perforation for improved fluid flow and well performance. Durable Construction: Built to withstand the rigors of abrasive materials, ensuring tool integrity and operational longevity. Operational Flexibility: Adapts to various well intervention scenarios with basic and ball-activated designs. Improved Efficiency: Reduces downtime and enhances well productivity through efficient and effective perforation. The JWN Jet Wash Nozzle by Marlin Oil Tools represents the pinnacle of well intervention technology, providing operators with a powerful tool for enhancing well integrity and performance. Incorporate the JWN Jet Wash Nozzle into your operations to achieve superior results in well perforation and intervention tasks.

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Stay Connected with Poseidon Robotics' Advanced ROV Communications Systems In the dynamic world of subsea exploration and robotics, seamless communication is the key to success. At Poseidon Robotics, we understand the critical role that robust and reliable communication systems play in the success of your Remote Operated Vehicle (ROV) missions. That's why we are thrilled to introduce our state-of-the-art ROV Communications Systems, designed to keep you connected and informed throughout your underwater operations. A Complete Communication Solution Our ROV Communications Systems are more than just individual components – they are a complete and integrated solution. The system includes telemetry units, a cutting-edge 3kV step-down transformer, and a Coarse Wave Division Multiplexer (CWDM) assembly that seamlessly feeds them. These components are carefully installed as a system and are ready to be wired, ensuring a hassle-free setup process and maximum performance. Robust Telemetry Units The heart of our ROV Communications Systems lies in our advanced telemetry units. These units are built to withstand the harsh subsea environment and are tested rigorously to ensure top-notch performance. Equipped with multiple Ethernet, video, and serial connections, our telemetry units provide a robust communication interface for your ROV, enabling seamless data transfer, control, and feedback during your underwater missions. 3kV Step-Down Transformer and CWDM Assembly Our innovative 3kV step-down transformer is a key component of the communication system. It allows for efficient and safe voltage reduction, ensuring that your subsea equipment receives the power it needs without compromising safety. The Coarse Wave Division Multiplexer (CWDM) assembly further enhances the system's capabilities by providing high-speed optical communication links, allowing for increased data capacity and transmission rates. Reliable and Efficient Integration At Poseidon Robotics, we pride ourselves on delivering products that are not only technologically advanced but also user-friendly. Our ROV Communications Systems are pre-integrated and designed to seamlessly work together, saving you time and effort during installation and setup. With our system, you can rest assured that your ROV's communication infrastructure is optimized for performance and reliability. Unleash the Power of Communication Experience the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Whether you are conducting scientific research, performing subsea inspections, or engaging in search and rescue operations, our communication solutions will keep you connected, informed, and in control. Say goodbye to communication challenges and embrace a new level of efficiency and effectiveness in your underwater missions. Choose Poseidon Robotics With a legacy of excellence and innovation, Poseidon Robotics is your trusted partner in the subsea robotics industry. Our commitment to quality, reliability, and customer satisfaction drives us to deliver cutting-edge solutions that exceed expectations. Join the growing community of satisfied customers and elevate your ROV operations with Poseidon Robotics' advanced communication systems. Stay Connected, Stay Successful Don't let communication gaps hinder your subsea missions. Embrace the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Contact us today to learn more about our products and how they can enhance your underwater operations. Stay connected, stay successful with Poseidon Robotics!

Revolutionizing Offshore Operations: The Pinnacle of Slickline Services by InWaTec Combined In the dynamic world of oil and gas extraction, offshore platforms are the frontiers of human engineering prowess, and InWaTec Combined stands as a beacon of innovation in well intervention services. Our Offshore Slickline Unit represents the cutting-edge culmination of technology and expertise, designed to ensure the seamless operation of your offshore wells. The Essence of Slickline Operations At the heart of our service is the slickline operation, a critical aspect of well maintenance and testing. Utilizing a single strand wire, known for its robustness and simplicity, our operators skillfully navigate downhole tools through the wellbore's demanding environment. From bailers to pulling tools, stems to running tools, our slickline is the lifeline that facilitates precise interventions within oil and gas wells. Versatility at Depth Slickline's single strand wire is more than just a cable; it's a versatile tool in its own right. Whether it's deploying valves, installing plugs, or adjusting pressure regulators, slickline operations by InWaTec Combined can handle a multitude of tasks with finesse. Our operators are trained to execute complex retrievals and installations, ensuring that your well's performance is optimized at all times. Tailored for the Offshore Challenge Understanding the unique challenges of offshore operations, our services are tailored to meet the demands of Mobile Offshore Drilling Units (MODUs), Light Intervention Vessels (LIVs), and stationary offshore platforms. Our slickline units are engineered to withstand the harshest marine conditions, delivering reliable performance where it matters most. A Commitment to Excellence InWaTec Combined's Offshore Slickline Unit services are underpinned by our unwavering commitment to excellence. We are not just service providers; we are partners in your quest for operational efficiency and resource maximization. With our slickline services, we promise not just to meet but to exceed the high standards of the oil and gas industry’s offshore sector. In conclusion, InWaTec Combined is not just facilitating well interventions; we are redefining them. Our Offshore Slickline Unit services are a testament to our dedication to excellence and our unrelenting pursuit of technological advancement. Let us take your offshore operations to new depths of success.

Introducing the SSA (Sliding Sleeve Actuator) from Marlin Oil Tools: Revolutionizing Multistage Fracturing Operations Marlin Oil Tools proudly presents the SSA (Sliding Sleeve Actuator), a state-of-the-art downhole tool designed to optimize well intervention and multistage fracturing operations. Engineered to activate sliding sleeves with unparalleled efficiency and precision, the SSA is an essential tool for modern well completion strategies. By eliminating the need for traditional activation balls, the SSA streamlines fracturing operations, significantly reducing intervention times and enhancing overall well productivity. Key Features of the SSA (Sliding Sleeve Actuator): Efficient Sleeve Activation: The SSA is specifically designed to activate sliding sleeves in the liner of the well, targeting planned fracturing spots with accuracy. Simplifies Operations: Replaces the conventional method of dropping activation balls into the well, thereby simplifying the activation process. Rapid Deployment and Retrieval: Engineered for use with coil tubing, the SSA ensures quick deployment and retrieval, minimizing downtime in fracturing operations. Eliminates Milling or Catching: By using the SSA, the need to mill or catch activation balls post-fracturing is removed, enhancing operational safety and efficiency. Seamless Integration: Optimally designed to integrate with existing well completion setups, the SSA facilitates a smooth fracturing process. Precision in Fracturing: Offers precise control over the activation of sliding sleeves, ensuring effective multistage fracturing exactly where needed. Elevate your well intervention and fracturing operations with the SSA (Sliding Sleeve Actuator) from Marlin Oil Tools, a groundbreaking solution tailored for the oil and gas industry. This innovative downhole tool revolutionizes sliding sleeve activation during multistage fracturing, offering a more efficient and precise alternative to traditional activation balls. Designed for rapid deployment and retrieval via coil tubing, the SSA not only simplifies fracturing operations but also significantly enhances well productivity and safety. Choose the SSA for a streamlined, effective approach to modern well completions and fracturing. Why Choose the SSA from Marlin Oil Tools? Operational Efficiency: Dramatically reduces intervention times, allowing for faster and more efficient fracturing operations. Enhanced Safety and Simplicity: Removes the complexities and safety concerns associated with milling or catching traditional activation balls. Precision Activation: Ensures accurate activation of sliding sleeves, maximizing the effectiveness of multistage fracturing. Innovative Design: The SSA's design is optimized for ease of use with coil tubing, ensuring seamless operation and integration into fracturing workflows. The SSA (Sliding Sleeve Actuator) by Marlin Oil Tools represents the forefront of innovation in downhole tools, providing operators with an advanced solution to meet the challenges of today's fracturing operations. Incorporate the SSA into your well intervention toolkit to achieve superior efficiency, safety, and performance in multistage fracturing.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

A solar panel, or solar module, is one component of a photovoltaic system. They are constructed out of a series of photovoltaic cells arranged into a panel. They come in a variety of rectangular shapes and are installed in combination to generate electricity. Solar panels are comprised of several individual solar cells which are themselves composed of layers of silicon, phosphorous (which provides the negative charge), and boron (which provides the positive charge). Solar panels absorb the photons and in doing so initiate an electric current. The resulting energy generated from photons striking the surface of the solar panel allows electrons to be knocked out of their atomic orbits and released into the electric field generated by the solar cells which then pull these free electrons into a directional current. This entire process is known as the Photovoltaic Effect.

Welcome to the ultimate solution for maintaining cleanliness in the most demanding industrial environments. Our 20-liter EnviroBlu cleaner is specially formulated to tackle tough dirt and grime efficiently, ensuring your workspaces are pristine while upholding the highest safety and environmental standards. Ideal for Harsh Conditions When you are dealing with stubborn industrial dirt, the 20-liter EnvirioBlu cleaner simplifies your cleaning processes. It's powerful yet safe and eco-friendly, perfect for industries that value efficiency and environmental responsibility. This large volume packaging is designed for cost-effective, long-term use, reducing the frequency of purchases and ensuring you get more cleaning done with less. See the difference for yourself and experience a cleaner, safer, and more efficient workplace. Please contact us for more information.

Elevate Well Integrity and Control with HOCA Oil Tools' Collar Stop In the complex realm of downhole operations, maintaining control and integrity within the wellbore is not just a goal—it’s a necessity. HOCA Oil Tools, a leader in downhole slick line tools, introduces the Collar Stop, a pivotal component designed to optimize downhole operations and ensure the utmost well integrity. Our commitment to innovation, quality, and reliability shines through in this essential tool, tailored to meet the demanding needs of modern oil and gas extraction. HOCA’s Collar Stop: Ensuring Unparalleled Downhole Control and Integrity The Collar Stop by HOCA Oil Tools is engineered for precision, durability, and versatility. Designed to lock securely into the collar recess of tubing, our Collar Stop provides an essential anchoring point for downhole tools and operations. Fabricated with top-grade materials and subjected to rigorous testing, the HOCA Collar Stop stands as a testament to our dedication to excellence, providing reliable performance in the most challenging downhole environments. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are committed to providing the oil and gas industry with downhole solutions that transcend conventional limitations. Our Collar Stop is a prime example of this commitment, embodying our dedication to safety, efficiency, and innovation. Incorporating the HOCA Collar Stop into your downhole toolkit not only elevates operational control and well integrity but also aligns your operations with the highest standards of quality and performance. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner committed to your success, offering cutting-edge solutions and unparalleled support. Choose HOCA Oil Tools’ Collar Stop for your downhole operations and join the ranks of satisfied customers who rely on our tools to secure their success. Elevate your well operations with HOCA Oil Tools – where innovation meets integrity.

Cleanstream: Ensuring Safe and Efficient Storage of NORM Material At Cleanstream, we understand the importance of maintaining a safe and sustainable environment. That's why we have developed rigorous procedures and controls to ensure that NORM material is stored safely and efficiently until proper cleaning and/or disposal can be carried out. NORM, or Naturally Occurring Radioactive Material, is present in many industries, including oil and gas, mining, and manufacturing. While it is a naturally occurring substance, it can be harmful if not handled properly. That's why Clearstream has taken proactive steps to ensure that our clients can safely and responsibly manage their NORM material. Our state-of-the-art storage facilities are equipped with the latest technology to monitor and control environmental factors, including temperature, humidity, and radiation levels. Our experienced team of professionals is trained to handle NORM material safely and efficiently, ensuring that it is stored in compliance with all regulatory requirements. At Cleanstream, we understand that our clients' needs are unique, and we work closely with them to develop customized solutions that meet their specific requirements. Our flexible storage options are designed to accommodate various types of NORM material, and we can quickly and efficiently adapt to changing circumstances. We take great pride in our commitment to safety, quality, and environmental responsibility. Our rigorous procedures and controls ensure that our clients can have peace of mind, knowing that their NORM material is stored safely and efficiently until proper cleaning and/or disposal can be carried out. Contact us today to learn more about how Cleanstream can help you safely and responsibly manage your NORM material.

Enhance Business Continuity with Leased Uninterrupted Power Supply (UPS) Solutions from CWB National Leasing Is your business ready to ensure uninterrupted operations and safeguard against power disruptions? Look no further than CWB National Leasing for all your Uninterrupted Power Supply (UPS) leasing needs. Here's why leasing UPS equipment with us is the right choice: Get Your UPS Equipment Fast At CWB National Leasing, we understand the critical importance of maintaining uninterrupted operations. When you apply for a UPS equipment lease with us, you can count on a swift decision-making process. We take pride in our rapid response times—typically, within just 48 hours of your approval, we'll notify your chosen equipment dealer that payment is on its way. All you need to do is sit back and relax while your UPS equipment is promptly delivered and installed. For more details on our approval turnaround times, please refer to our information page. Increase Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a substantial upfront purchase of UPS equipment, consider the benefits of periodic lease payments offered by CWB National Leasing. By opting for leasing, you can unlock essential cash resources that can be invested in other critical areas of your business. But that's not all—we go the extra mile by allowing you to enhance your UPS equipment with additional features or accessories for a modest payment increase. Yes, that's right; we put the "POW" in Buying Power, offering you the flexibility to customize your UPS solution to meet your specific requirements. Control Your Cash Flow Effective cash flow management is pivotal for the success of any business. When you lease UPS equipment with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are designed to ensure small, manageable payments throughout the lease term. What does this mean for you? It means that as you pay for your UPS equipment, it will start earning you money by protecting your operations from power disruptions. This approach makes it easy to maintain a favorable expense-to-revenue ratio, putting you in command of your business's continuity. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are tailored to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to seamlessly align with your revenue patterns. With CWB National Leasing, your UPS equipment lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing UPS equipment through CWB National Leasing isn't just a smart business move; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully comprehend how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will assist you in navigating the tax advantages of leasing UPS equipment with confidence. In conclusion, leasing UPS equipment with CWB National Leasing is the strategic choice for business owners determined to ensure business continuity, reduce costs, and increase profitability. From rapid equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on your business's continuity; choose CWB National Leasing for all your UPS equipment leasing needs today!

Introducing the MHA Motorhead Assembly from Marlin Oil Tools: A Comprehensive Downhole Solution for Coiled Tubing Operations in the Oil and Gas Industry Marlin Oil Tools is proud to present the MHA Motorhead Assembly, an innovative downhole tool designed to enhance the efficiency and safety of coiled tubing operations within the oil and gas sector. As a versatile component of the Bottom Hole Assembly (BHA), the MHA Motorhead Assembly is engineered to operate seamlessly with or without a motor, offering flexibility for a wide range of well intervention tasks. Featuring key components like the Back Pressure Valve (BPV), Hydraulic Disconnect (HDI), and Dual Circulation Sub (DCS), the MHA is your all-in-one solution for optimized downhole performance. Key Features of the MHA Motorhead Assembly: Versatile Use: Whether installed above a motor or run independently, the MHA provides critical functionality for well intervention operations. Comprehensive Assembly: Includes essential parts such as the BPV for well pressure control, the HDI for secure and efficient tool separation, and the DCS for enhanced fluid management. Enhanced Operational Safety: The inclusion of a Back Pressure Valve ensures controlled pressure conditions, minimizing the risk of blowouts or other well control issues. Reliable Disconnect Capability: The Hydraulic Disconnect allows for a swift and safe disengagement from the lower BHA components under challenging conditions, enhancing operational safety and flexibility. Improved Fluid Circulation: The Dual Circulation Sub enables operators to manage downhole fluid dynamics effectively, optimizing well cleaning and treatment processes. Elevate your coiled tubing operations with the MHA Motorhead Assembly from Marlin Oil Tools, a leading-edge downhole solution tailored for the oil and gas industry. Designed for versatility and efficiency, the MHA integrates critical components like the BPV, HDI, and DCS into a single assembly, streamlining your BHA configuration for various well intervention scenarios. Whether conducting well cleanouts, stimulations, or other interventions, the MHA Motorhead Assembly offers the reliability, safety, and performance necessary to achieve operational success. Opt for the MHA from Marlin Oil Tools for a comprehensive approach to downhole challenges. Why Choose the MHA Motorhead Assembly from Marlin Oil Tools? Operational Versatility: Adapts to different well intervention needs with or without a motor, ensuring broad application scope. Integrated Safety Features: Combines pressure control, secure disconnection, and fluid management into one assembly for enhanced safety. Streamlined BHA Integration: Simplifies the BHA setup, reducing the need for multiple tools and ensuring compatibility across operations. Enhanced Efficiency and Safety: Delivers improved operational outcomes with built-in safety mechanisms, minimizing risks and enhancing performance. The MHA Motorhead Assembly by Marlin Oil Tools represents the forefront of innovation in coiled tubing tool technology, providing operators with a versatile, safe, and efficient solution for maximizing well intervention results. Incorporate the MHA into your coiled tubing operations to ensure superior downhole performance and operational success.

Enhance Charging Security and Efficiency with the CSA 36 Unit Locking FAST Charger Rack from Provix Provix is proud to offer the CSA 36 Unit Locking FAST Charger Rack (Part # NWI-NWCR-36BLC), an advanced charging solution designed to cater to the needs of mining, construction, and industrial professionals. This charger rack is an ideal blend of speed, security, and capacity, perfect for medium to large-scale operations. Swift Charging for Continuous Operations The CSA 36 Unit Charger Rack is engineered for quick and efficient charging, reducing downtime to a minimum. It boasts a charging time of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This rapid charging capability ensures your team's equipment is promptly ready for use, enhancing overall productivity. Secure Locking Mechanism for Added Safety With its locking feature, the CSA 36 Unit Charger Rack provides an extra layer of security, safeguarding your valuable equipment during charging. This is especially crucial in environments where the risk of theft or tampering is a concern. The locking mechanism ensures that the equipment remains secure, offering peace of mind and improved safety in the workplace. Space-Efficient Design for Organized Workspaces Despite its capacity to charge 36 units, this charger rack is designed with space efficiency in mind. Its compact form factor makes it an excellent fit for equipment rooms and charging stations where space is at a premium, helping maintain an organized and clutter-free environment. Durable Construction for Industrial Environments Built to withstand the harsh conditions typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust construction ensures it can endure daily wear and tear, offering long-term, dependable performance. Ideal for Varied Operational Needs Whether you’re managing a mining operation, a construction site, or an industrial facility, the CSA 36 Unit Locking FAST Charger Rack is an excellent choice. It accommodates a considerable number of units, making it suitable for operations that require efficient and secure charging solutions. Upgrade Your Charging Setup with Provix Invest in the Wisdom CSA 36 Unit Locking FAST Charger Rack to streamline your charging processes and enhance the security of your equipment. Visit Provix at www.provix.net to learn more about this high-capacity, secure charging solution and explore our range of specialized mining equipment.

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog.

At Houston Digital Instruments (HDI), we are committed to providing cutting-edge measurement solutions to our customers. While we have replaced the HDI M100 Pressure Gauge with our latest innovation, the HDI 2000P, we understand that there are still existing installations of the M100 in the field. That's why we continue to offer parts and services to ensure ongoing support for your equipment. Reliable Performance in a Compact Design: The HDI M100 Pressure Gauge, though discontinued, has left a lasting legacy of dependable performance. This battery-powered gauge features a solid-state platform with no fluids or moving parts, providing accurate pressure measurements in a compact and robust package. With pressure ranges of 6,000 psi, 10,000 psi, and 16,000 psi, you can select the configuration that suits your specific needs. Field Repairable and Battery Powered: The M100 Pressure Gauge is designed for easy maintenance and minimal downtime. If repairs are ever needed, our field repairable system ensures that you can quickly address any issues and keep your operations running smoothly. The low battery indicator keeps you informed of the gauge's power status, allowing for timely battery replacements and uninterrupted monitoring. Versatile Connectivity Options: We understand that different applications require different connection types. The M100 offers various connection options, including 2" Male NPT, 2" 1502, 2" 2202, or flanged connections. This flexibility allows you to seamlessly integrate the gauge into your existing setup. Additionally, the M100 provides 4-20mA or 0-1 volt output options, enabling compatibility with your preferred data acquisition systems. Enhanced Visibility and Durability: In demanding environments where vibrations are present, the M100 Pressure Gauge demonstrates consistent performance. Its solid-state design ensures resistance to high vibration environments, ensuring accurate and reliable pressure readings. The analog bar graph with a divided scale provides clear and intuitive visualization, even in challenging conditions. Future-Proof Your Measurement Solutions: While the HDI M100 Pressure Gauge may have reached the end of its production cycle, we are excited to introduce its successor, the HDI 2000P. This advanced pressure gauge system offers enhanced features, improved accuracy, and expanded configuration options. Our dedicated team is ready to assist you in transitioning to the HDI 2000P, providing a seamless upgrade to your pressure measurement capabilities. Continued Support for Existing Installations: We understand the importance of maintaining and servicing existing equipment. Even though the M100 Pressure Gauge is no longer in production, we are committed to supporting our customers who rely on this legacy product. Our comprehensive parts inventory and expert technicians ensure that you can access the necessary resources to keep your M100 Pressure Gauge operational. For any inquiries, parts, or service requests related to the HDI M100 Pressure Gauge, please reach out to our dedicated support team. We are here to assist you in maximizing the lifespan and performance of your equipment. Houston Digital Instruments remains dedicated to providing innovative, reliable, and future-proof measurement solutions. Trust us to deliver excellence in measurement technology, ensuring your continued success in a dynamic industry.

Streamlining Pipeline Pipe Inventory and Inspection Tracking with PipeDNA: Enhancing Efficiency in the Oil and Gas Industry Efficient management of pipeline pipe inventory and inspection tracking is crucial for the smooth operation of the oil and gas industry. Introducing PipeDNA, a state-of-the-art cloud-based platform designed to streamline the management of pipe and tube throughout the entire supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage pipeline pipe inventory, increase visibility, and optimize inspection processes. Comprehensive Inventory and Tracking: PipeDNA provides a comprehensive inventory management and tracking system for pipelines, enabling stakeholders to have a real-time view of their pipeline assets. From monitoring utilization and activity to analyzing trends, the platform equips stakeholders with valuable insights to make informed decisions about their pipeline pipe inventory. With enhanced visibility, stakeholders can optimize inventory levels, minimize downtime, and maximize resource utilization. Efficient Logistics Management: Managing the logistics of pipelines can be complex, but PipeDNA simplifies the process by offering robust logistics management features. Stakeholders can efficiently handle shipments, track the status of pipeline pipe in transit, and streamline documentation processes. Additionally, the platform facilitates pipe bundling, ensuring efficient grouping and transportation of pipeline pipe, leading to cost savings and improved operational efficiency. Streamlined Inspection Management: PipeDNA's inspection management capabilities extend to pipelines, allowing stakeholders to effectively manage inspection jobs across multiple sites. The platform enables seamless coordination, tracking of job statuses, and management of inspection profiles. By centralizing inspection data and streamlining workflows, PipeDNA optimizes the inspection process, ensuring compliance with industry standards and mitigating risks associated with pipeline integrity. Enhanced Identification and Traceability: PipeDNA's identification and traceability features enable quick and reliable identification of pipeline pipe, providing comprehensive details, activity history, and traceability documentation. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, facilitating easy tracking and identification of individual pipelines. By enhancing identification and traceability, PipeDNA strengthens quality control measures, streamlines recalls if necessary, and supports compliance with industry regulations. Seamless Integration of Manufacturing Data: PipeDNA seamlessly integrates manufacturing data into its platform, eliminating the need for manual data entry and reducing the risk of human errors. This integration ensures that pipeline-related data, including manufacturing details, is readily available within the system. By automating the transfer of manufacturing data, PipeDNA enables stakeholders to maintain accurate and reliable records, facilitating efficient pipeline pipe management and data-driven decision-making. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's popular and emerging technologies to optimize pipeline pipe inventory and inspection tracking. The platform supports barcoding and labeling systems, integrating popular barcode standards such as UPC, EAN, and QR codes. Additionally, PipeDNA is RFID ready, enabling stakeholders to seamlessly integrate RFID technologies such as labels and asset tags for efficient tracking and management of pipelines. Furthermore, the platform supports IoT data integrations using the MQTT standard, facilitating fast and reliable sensor data integration for enhanced pipeline pipe management processes. PipeDNA revolutionizes pipeline pipe inventory and inspection tracking in the oil and gas industry, providing stakeholders with a powerful cloud-based solution. By offering comprehensive inventory and tracking capabilities, efficient logistics management, streamlined inspection processes, enhanced identification and traceability, and seamless integration of manufacturing data, PipeDNA empowers stakeholders to maximize efficiency and productivity. Embrace PipeDNA and experience the benefits of improved pipeline pipe management, increased visibility, and optimized operations in the oil and gas supply chain.