Heeft u geen account? Meld u gratis aan
Voor adverteren op
Interesse om verkoper te worden? Ontvang informatie
Heeft u geen account? Meld u gratis aan
Voor adverteren op
Interesse om verkoper te worden? Ontvang informatie
Heeft u geen account? Meld u gratis aan
Voor adverteren op
Interesse om verkoper te worden? Ontvang informatie
Tubing Hanger
Ook bekend als:
Dognut, wet-connect, feed-through mandrel, penetratorBuy
In Stock
Product
New
API
Sea Freight
Titel:
Tubing hanger with electrical feedthrough for ESP applicationsModel Nummer:
Beschikbaarheid:
In StockLevertijd (weken):
3 WeeksChoose
Transactie Type
BuyStaat
NewGewicht
less than 50 lbsLocatie
CanadaBedrijfstype
Product ProviderKwaliteitsgarantie
APIPrijs
Request for Quote On specificationMateriaal
Super DuplexMerknaam
Verzending
Land FreightNotities
Midastream Supply Company in Airdrie
The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
The WL™packer is a new wireline-set, retrievable, high-performance production packer, run in combination with the L-10 on/off tool. The WL can be run as a temporary bridge plug by installing a blanking plug in the L-10 seal nipple, above the packer. This enables remedial or stimulation work above the packer. The plug can then be removed with conventional wireline methods, allowing production of the well to be resumed.
Buy
Made to Order
Product
New
API
Sea Freight
Scaffolding for onshore and offshore
ScaffoldMidastream Supply Company in Airdrie
Finish the job in any and all conditions since this product is weather-resistant and durable so you can enjoy it for many years to come. Each frame is sold separately. Note that the galvanized cross braces and aluminum platforms with plywood are not included. When assembled, this scaffold has a load capacity of up to 4,960 pounds.
Buy
In Stock
Product
New
ISO
Sea Freight
Capillary Deliquification Safety System
Cap StringMidastream Supply Company in Airdrie
In mature fields, liquid loading of gas wells is a common problem. In the short term, this can lead to decreased production, and if not managed correctly, can ultimately reduce overall reservoir recovery. One option for managing the problem is the use of surfactants as foaming agents to artificially unload the well. The preferred method would allow automatic and continuous delivery of these surfactants. The capillary deliquification safety system facilitates delivery of surfactants or other chemicals and liquids to a specified point within the completion, while maintaining the purpose and functionality of a downhole safety device. The deliquification safety system can be installed in an existing completion with the appropriate safety valve landing nipple (SVLN) profile — either a dedicated SVLN or within a tubing-retrievable safety valve (TRSV) in which the control system communication is activated to operate an installed wireline-retrievable safety valve (WLRSV). The system’s injection feature operates via the WLRSV control system. When control-line pressure reaches a predetermined pressure, a regulator installed below the WLRSV opens, allowing chemical injection to occur. Use of the existing control line provides a cost-effective method of installing a semi-permanent injection system without the need to modify the wellhead. The WLRSV is designed to shut in the well at a point below the surface and is opened with hydraulic control pressure. In this application, the applied chemical injection pressure maintains the safety valve in the open position during injection, and the valve closes when injection is stopped. Applications » Chemical injection for gas well deliquification or scale treatment purposes » Available for landing nipples/TRSVs with 2.75-in. and larger sealbores Features » Field-proven WLRSV » Equalizing or non-equalizing-type flapper closure *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
FRN Wireline Retrievable 5.5 inch Subsurface Safety Valve
WR-SCSSSV FRNMidastream Supply Company in Airdrie
The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
SP TR Surface Controlled Subsurface Safety Valve 6-5/8 inch
SCSSSV SPMidastream Supply Company in Airdrie
The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
The HS™ is setting the standard for high-performance, single-string retrievable, hydraulic-set shear-release packers. Its simple and reliable design provides maximum pre-set prevention while running and has improved sealing and retrieving reliability, metallurgy and elastomer selections it for the well environment. Other applications include: production, injection and zonal isolation; single-string selective completions or dual-string completions with multiple packers; completions that require pre-set prevention while running; deviated wells or other applications when rotation for installation or removal is not beneicial; when it is beneicial to displace and set packers after the well is langed up. The HS-S™ is beneicial when testing the tubing string before packer setting or to independently set and test individual packers in multiple-packer completions and stacked packer applications. The HS-S is the selective-set version of the HS hydraulic-set single-string packer. Setting and retrieval is the same as the HS with the exception of an inner sleeve that must be shifted mechanically before the packer will set. The selective-setting mechanism prevents the packer from premature setting when high tubing-to annulus pressure differences are encountered or when tubing- pressure tests are performed. Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917)
Buy
Made to Order
Product
New
API
Sea Freight
Injection Safety MC Valve 2-1/2 inch
MC ValveMidastream Supply Company in Airdrie
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer
Buy
In Stock
Product
New
ISO
Land Freight
Bigbore Wireline Retrievable Surface Controlled Subsurface Safety Valve 4.5 inch
WR-SCSSSV Bigbore 4.5 inchMidastream Supply Company in Airdrie
The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Injection Well Subsurface Safety Valve WI 4.89
WI ValveMidastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Subsurface Safety Valve for Injection Wells 5.4 inch
WI ValveMidastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required.
Buy
In Stock
Manufacturer
New
API
Sea Freight
Midastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Midastream Supply Company in Airdrie
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer
Buy
In Stock
Product
New
API
Air Freight
The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility.
FXE 2-7/8 inch Wireline Retrievable Surface Controlled Subsurface Safety Valve
WR-SCSSSV FXEMidastream Supply Company in Airdrie
The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
General Mechanical Slickline Service
InWaTec Combined in Vechta
InWaTec Combined: Precision at Depth with General Mechanical Slickline Services In the demanding arena of oil and gas well maintenance, precision is not just a virtue—it's a necessity. At InWaTec Combined, we provide General Mechanical Slickline services that bring precision to the heart of your well operations. Our slickline services deliver targeted maintenance solutions, assuring that performance, integrity, and productivity remain at the forefront of your downhole activities. The Role of Slickline in Downhole Maintenance Slickline is the unsung hero of well servicing, a slender thread of robustness, lowering essential tools into the depths of oil and gas wells to execute critical maintenance tasks. It is the conduit for precision, the means by which tools are delivered to the precise downhole location where they are needed. Why Choose InWaTec Combined's Slickline Services? Expertise at Every Turn: Our slickline operators are seasoned experts, with the skill to navigate complex downhole environments, ensuring that every tool is deployed with accuracy. Versatile Tool Deployment: From routine maintenance to emergency interventions, our slickline services cater to a diverse range of downhole needs, delivering the right tool to the right place at the right time. Streamlined Operations: Efficiency is key in downhole operations, and our slickline services are designed to minimize downtime, streamline processes, and maintain the peak performance of your wells. Safety and Precision Combined: At InWaTec Combined, we balance the need for operational precision with an uncompromising commitment to safety, ensuring that every slickline operation upholds the highest standards. Tailored Solutions for Downhole Challenges Every well presents its own set of challenges, and InWaTec Combined's General Mechanical Slickline services are crafted to meet them head-on. We provide tailored solutions, customizing our approach to fit the unique needs of your well, ensuring that maintenance tasks are carried out with precision and care. Advanced Technology for Optimal Results We leverage the latest in slickline technology, utilizing advanced materials and innovative techniques to enhance the reliability and effectiveness of our services. Our commitment to technological advancement means that we're always at the cutting edge, providing services that are not just current but future-ready. Your Partner in Well Maintenance Choosing InWaTec Combined for your slickline needs means selecting a partner dedicated to the success of your well operations. Our General Mechanical Slickline services are a reflection of our promise to deliver excellence in every aspect of our work, from the initial deployment of tools to the completion of maintenance tasks. Conclusion: Your Well's Performance, Our Commitment In conclusion, InWaTec Combined's General Mechanical Slickline services are essential for maintaining the high performance and integrity of your oil and gas wells. With our focus on precision, efficiency, and safety, we ensure that your maintenance operations are performed to the highest standards. Trust in the expertise and dedication of InWaTec Combined to keep your wells operating smoothly, safely, and efficiently.
Service
In Stock
Service
New
API
Land Freight
InWaTec Combined in Vechta
Enhancing Well Efficiency: InWaTec Combined’s Precision E-line Packer Setting Services The backbone of any well’s structural integrity and operational efficiency lies in the strategic placement and setting of production packers. InWaTec Combined’s E-line Packer Setting Services provide meticulous installation of these critical components, ensuring an optimal seal and isolation within your wellbore. A production packer is not just a piece of hardware; it’s a guardian that ensures the separation of production zones, safeguards the casing from pressure, and enhances the overall management of the well. Our E-line Packer Setting Services cater to both production and service packer requirements, providing versatile solutions tailored to the unique challenges of your well operations. Production Packers: These remain in place during well production, set above the top perforations or sand screens. They are pivotal in multi-zone reservoirs, where they isolate perforations for each zone, allowing for selective production through the use of sliding sleeves. Service Packers: Employed temporarily during well servicing tasks like cement squeezing, acidizing, fracturing, and well testing, service packers are essential for the precise and safe execution of these operations. Packers are designed with a keen eye on reliability—metal slips and rubber elements, or metal rings in high-pressure scenarios, ensure a firm grip and seal against the casing ID. Our E-line Packer Setting Services employ the latest in axial load technology, whether hydraulic, mechanical, or chemical, to expand and secure these packers at the optimal depth. For permanent well configurations, our permanent packers offer a cost-effective and robust solution, boasting superior sealing and gripping capabilities. When retrievability is key, our retrievable packers provide flexibility for secondary recoveries, re-completions, or production tubing changes, with designs that ensure ease of removal and the possibility of reuse after servicing. InWaTec Combined’s commitment to excellence in E-line Packer Setting Services is unwavering. We provide not only the tools but also the strategic foresight and technical support to ensure that your packer installation enhances well performance, maintains integrity, and supports your production goals. Partner with InWaTec Combined for your packer setting needs and experience the assurance that comes from precision, durability, and adaptability. Our services are designed to secure your well’s future, one packer at a time.
Service
In Stock
Service
New
API
Land Freight
Pressure and Temperature Memory Gauge Service
InWaTec Combined in Vechta
Enhancing Well Performance Insights with InWaTec Combined’s Memory Gauge Services At InWaTec Combined, we recognize that the quest for efficiency within the oil and gas sector hinges on the precision of data collected from the depths of the earth. This is precisely why we offer top-tier Pressure and Temperature Memory Gauge Services—a tool crucial for optimizing well productivity and ensuring operational integrity. Our electronic Memory Gauges are engineered to withstand the rigorous conditions of the downhole environment, providing accurate records of pressure and temperature. These robust instruments are the sentinels of the wellbore, vigilantly recording data that is vital for the evaluation of well performance and reservoir behavior. The utilization of Memory Gauges is central to gauging bottomhole pressures and temperatures across varying production rates. This data is instrumental in conducting build-up and drawdown tests, which are essential for assessing well productivity. With the insights garnered from these tests, operators can make informed decisions about stimulation, enhancement, and management of their well systems. InWaTec Combined’s Memory Gauges are not just instruments; they are the bearers of information that can significantly impact the economics of well operations. By accurately capturing downhole conditions, our gauges assist in pinpointing production issues, facilitating timely interventions that can forestall costly downtime and mitigate potential hazards. Our commitment at InWaTec Combined is to provide our clients with not just data, but solutions that translate into cost savings, increased safety, and environmental protection. Investing in our Memory Gauge Services means investing in the longevity and prosperity of your wells. Let us partner with you to harness the full potential of your reservoirs with precision, reliability, and expertise that you can trust.
Service
In Stock
Service
New
API
Land Freight
Shifting Tools for Downhole Tools
Downhole ToolsHoca Oil Tools in Zwartemeer
Streamline Your Downhole Operations with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the constantly evolving oil and gas industry, having the right tools for specific downhole tasks can significantly enhance operational efficiency and safety. HOCA Oil Tools specializes in providing such solutions, and our Internal Fishing Neck Pulling Tools are a prime example. These tools are meticulously engineered for the safe and efficient retrieval of downhole equipment, ensuring operations proceed smoothly without unnecessary downtime or risk. HOCA's Internal Fishing Neck Pulling Tools: Engineered for Precision and Reliability Designed to latch onto internal fishing necks of downhole tools and equipment, HOCA Oil Tools' Internal Fishing Neck Pulling Tools offer unmatched precision and reliability. These tools are integral for the retrieval process, providing a secure grip without damaging the wellbore or the equipment being retrieved. Constructed from high-quality materials and designed to meet rigorous industry standards, our pulling tools ensure successful operations under a variety of downhole conditions. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means opting for a blend of quality, innovation, and support designed to meet the specific needs of modern downhole operations. Our commitment to excellence ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your downhole operations translates into enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to your success, offering cutting-edge solutions and unparalleled service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Internal Fishing Neck Pulling Tools for their critical operations. Elevate your downhole performance with HOCA Oil Tools – where technology, innovation, and reliability converge to drive success.
Buy
In Stock
Product & Service
New
API
Air Freight
Pressure and Temperature Memory Gauge Service
InWaTec Combined in Vechta
Enhancing Well Performance Insights with InWaTec Combined’s Memory Gauge Services At InWaTec Combined, we recognize that the quest for efficiency within the oil and gas sector hinges on the precision of data collected from the depths of the earth. This is precisely why we offer top-tier Pressure and Temperature Memory Gauge Services—a tool crucial for optimizing well productivity and ensuring operational integrity. Our electronic Memory Gauges are engineered to withstand the rigorous conditions of the downhole environment, providing accurate records of pressure and temperature. These robust instruments are the sentinels of the wellbore, vigilantly recording data that is vital for the evaluation of well performance and reservoir behavior. The utilization of Memory Gauges is central to gauging bottomhole pressures and temperatures across varying production rates. This data is instrumental in conducting build-up and drawdown tests, which are essential for assessing well productivity. With the insights garnered from these tests, operators can make informed decisions about stimulation, enhancement, and management of their well systems. InWaTec Combined’s Memory Gauges are not just instruments; they are the bearers of information that can significantly impact the economics of well operations. By accurately capturing downhole conditions, our gauges assist in pinpointing production issues, facilitating timely interventions that can forestall costly downtime and mitigate potential hazards. Our commitment at InWaTec Combined is to provide our clients with not just data, but solutions that translate into cost savings, increased safety, and environmental protection. Investing in our Memory Gauge Services means investing in the longevity and prosperity of your wells. Let us partner with you to harness the full potential of your reservoirs with precision, reliability, and expertise that you can trust.
Service
In Stock
Service
New
API
Land Freight
CWB National Leasing in Winnipeg
Accelerate Your Business with Class 8 Truck Leasing from CWB National Leasing Transform Your Transportation and Logistics with Smart Leasing Solutions For businesses in sectors like construction, transportation, and logistics, Class 8 trucks are indispensable for efficient operation. Leasing these heavy-duty trucks through Canadian Western Bank (CWB) National Leasing offers a powerful and financially savvy solution. Here’s how leasing Class 8 trucks can drive your business towards greater efficiency and profitability: 1. Fast Equipment Acquisition CWB National Leasing prioritizes your business needs with a rapid leasing process. Decisions are typically made within 48 hours of application submission, ensuring that the payment process is initiated swiftly. This efficiency allows for the quick delivery of Class 8 trucks, minimizing downtime and keeping your operations running smoothly. 2. Boosted Purchasing Power Leasing Class 8 trucks with CWB National Leasing enhances your financial resources. It enables you to secure these essential vehicles through manageable periodic payments rather than a substantial upfront purchase, freeing up capital for other vital business needs. Plus, you have the option to add extra features or accessories to your trucks with a small increase in payments. 3. Optimized Cash Flow Smaller lease payments spread over the term mean that your Class 8 trucks start contributing to your business’s bottom line while they’re being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is key to financial health and business growth. 4. Flexible Payment Structures CWB National Leasing offers customizable payment plans, including seasonal, semi-annual, or annual options, to match your business’s revenue cycle. This flexibility is especially beneficial for businesses with fluctuating or seasonal income, ensuring that payments are manageable and aligned with your financial capacity. 5. Potential Tax Benefits Leasing Class 8 trucks can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to explore how leasing can positively impact your business’s tax situation. Conclusion Leasing Class 8 trucks through CWB National Leasing is a strategic decision that empowers your business with critical transportation and logistical capabilities while maintaining financial flexibility. It ensures access to state-of-the-art trucks, crucial for your operations, without the heavy financial burden of a large upfront investment. This leasing approach paves the way for enhanced operational efficiency, business expansion, and increased profitability.
Service
In Stock
Service
New
ISO
PipeDNA in Houston
Enhancing Tubular Inspection Management with PipeDNA: Streamlining Quality Assurance in the Oil and Gas Industry In the oil and gas industry, ensuring the quality and integrity of tubular products is of paramount importance. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to effectively manage and streamline tubular inspection processes, enabling enhanced quality assurance and compliance. Efficient Management of Inspection Jobs: PipeDNA provides a comprehensive solution for managing inspection jobs across multiple sites. Stakeholders can easily create and track inspection jobs, monitor their status, and manage inspection profiles within the platform. This streamlined approach eliminates manual and time-consuming processes, ensuring efficient coordination and effective allocation of inspection resources. Real-time Job Status and Reporting: With PipeDNA, stakeholders can access real-time updates on the status of inspection jobs. The platform enables instant communication and collaboration between inspectors, supervisors, and other relevant parties involved in the inspection process. By providing a centralized hub for reporting and documentation, PipeDNA enhances transparency and allows for swift decision-making based on accurate and up-to-date information. Tailored Inspection Profiles: PipeDNA allows stakeholders to create and manage inspection profiles specific to their tubular products. Customizable inspection profiles enable stakeholders to define the required tests, measurements, and criteria for each type of tubular product. By tailoring inspection profiles to their unique needs, stakeholders can ensure adherence to industry standards and regulatory requirements, ultimately guaranteeing the quality and safety of their tubular assets. Seamless Integration of Inspection Data: PipeDNA offers seamless integration of inspection data, eliminating the need for manual data entry and reducing the risk of human errors. The platform allows for the integration of manufacturing data, ensuring that inspection results are directly linked to the production process. By automating the transfer of data, PipeDNA enables stakeholders to maintain accurate and reliable records, enhancing traceability and facilitating data-driven decision-making. Enhanced Identification and Traceability: PipeDNA's identification and traceability features provide stakeholders with quick and accurate pipe identification, detailed pipe information, activity history, and traceability documentation. By integrating popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables seamless identification and tracking of each tubular product. This enhanced traceability minimizes the risk of errors, supports efficient recalls if necessary, and ensures compliance with industry regulations. Leveraging Emerging Technologies: PipeDNA leverages today's emerging technologies to optimize tubular inspection management. The platform supports barcoding and labeling systems, integrating popular barcode standards for efficient identification and tracking. PipeDNA is RFID ready, allowing for integration with RFID technologies such as labels and asset tags, further enhancing asset tracking and traceability. Additionally, PipeDNA supports IoT data integrations using the MQTT standard, enabling fast and reliable sensor data integration for enhanced inspection processes. PipeDNA revolutionizes tubular inspection management in the oil and gas industry, providing a smart cloud-based platform that streamlines quality assurance processes. By offering efficient management of inspection jobs, real-time status updates, tailored inspection profiles, seamless data integration, and enhanced identification and traceability, PipeDNA empowers stakeholders to ensure the highest level of quality and compliance in their tubular assets. Embrace PipeDNA and elevate your tubular inspection management to new levels of efficiency and reliability.
Service
Currently in Use
Service
New
API
Air Freight
Hoca Oil Tools in Zwartemeer
Optimizing Downhole Operations with HOCA Oil Tools B.V.'s Slickline Tool Strings In the world of oil and gas, the efficiency and reliability of downhole operations are paramount. HOCA Oil Tools B.V. stands at the forefront of this industry, providing innovative slickline tool string solutions that cater to the complex needs of modern well interventions. Our comprehensive range of slickline tool strings is designed to enhance operational flexibility, precision, and safety, ensuring that our clients can tackle downhole challenges effectively and efficiently. Six Key Benefits of HOCA's Slickline Tool Strings: Versatility in Application: Our slickline tool strings are crafted to perform a wide array of downhole tasks, from routine maintenance to complex problem-solving interventions, providing operators with the tools necessary for any scenario. Enhanced Operational Efficiency: Precision-engineered for optimal performance, our tool strings reduce non-productive time by enabling quicker and more effective downhole operations, from logging to perforation and beyond. Customization and Flexibility: We offer a variety of tool string components, allowing for complete customization based on specific operational requirements and wellbore conditions, ensuring the right tools are always at hand. Superior Material and Construction: Constructed with high-quality materials, our slickline tool strings withstand the harsh downhole environments, ensuring durability and longevity while minimizing the risk of tool failure. Improved Safety and Reliability: Our tool strings are designed with safety and reliability at their core, incorporating features that minimize risks to both personnel and equipment, thereby enhancing overall operational safety. Technical Support and Expertise: With HOCA Oil Tools B.V., clients gain not just superior slickline tool strings but also the backing of our extensive expertise and support, ensuring that any issues can be swiftly addressed and resolved. HOCA's Diverse Array of Slickline Tool Strings: Our slickline tool strings are composed of several key components, each designed for specific functions within the downhole environment: Rope Sockets: These are essential for connecting the wireline to the tool string, available in various sizes and types to suit different wire sizes and operational needs. Swivel Joints: Incorporated to minimize wire twisting during operations, our swivel joints ensure smoother deployment and retrieval of tool strings, reducing the risk of wireline damage. Stems (Weight Bars): Used as weights to counteract well pressure and assist in lowering the tool string into the wellbore, our stems also play a crucial role in jarring operations by providing the necessary impact force. Jars: These components are crucial for delivering impacts within the wellbore to dislodge stuck tools or debris. Our jars are designed for both upward and downward jarring actions, tailored to the needs of the operation. Accelerators: Used in conjunction with jars, accelerators store additional energy to increase the impact force, enhancing the effectiveness of jarring operations. Knuckle Joints: Providing flexibility to the tool string, knuckle joints allow for angular movement, facilitating navigation through deviated sections of the wellbore. Each component of our slickline tool strings is engineered to the highest standards, ensuring compatibility, performance, and reliability. With sizes ranging from 3/8” to 2 1/2” and options for both threaded connections and Quick Lock Systems (QLS), HOCA Oil Tools B.V. offers comprehensive solutions tailored to the diverse needs of the oil and gas industry. In conclusion, HOCA Oil Tools B.V. is your trusted partner for slickline tool strings, combining innovation, quality, and service to optimize your downhole operations. Choose HOCA for your wireline needs and experience the difference that professional-grade tools and unparalleled support can make in your well intervention and maintenance tasks.
Buy
In Stock
Product & Service
New
API
Air Freight
Eleks in Toronto
Unleash Innovation with Confidence: ELEKS PoC Development Services In the ever-evolving landscape of business, the power of innovation cannot be understated. Introducing ELEKS PoC Development Services – your gateway to exploring groundbreaking concepts with precision, resilience, and expert guidance. Transform your ideas into market-ready solutions while mitigating risks, maximizing efficiency, and embracing success like never before. Fuel Your Vision, Predict Success: Predict Project Success, Not Failure: Dreams demand diligence. If your idea is unproven, our experts will join forces with you to subject it to rigorous testing. By doing so, we eliminate the risk of investing prematurely in concepts that haven't stood the test of time. Refine your ideas with our guidance, turning potential pitfalls into pathways to success. Test the Waters with Minimal Risk: Even the most intricate concepts, involving emerging technologies like blockchain, can be tested with ease. Our seasoned R&D team is at your service, offering predictions, roadmaps, and post-PoC Development analysis. The result? A solution perfectly aligned with your vision and goals, all while minimizing financial exposure. Accelerate Development Efforts: Time is of the essence. By partnering with ELEKS, you'll streamline your in-house testing processes. We identify bottlenecks that hamper your development timeline, presenting you with a deployable software package as soon as you're ready. Fast-track your journey from idea to market-ready reality. Feedback-Driven Success: Your stakeholders' feedback is invaluable. We collaborate closely with you to manage and leverage this input, guiding your next steps. Market acceptance testing lets you dip your toes while gauging potential obstacles. Armed with feedback and experience, scaling becomes a smooth, hurdle-free journey. Map Your Path to Prosperity: Our software experts don't just focus on the present; they help you plan for a thriving future. A comprehensive project evaluation sets the stage for a roadmap that optimizes your upcoming projects for unrivaled efficiency. ELEKS PoC Development: Your Path to Success: Research and Idea Validation: As soon as your requirements are clear, we craft a scope, timeline, and budget. Our time-tested framework kicks into gear, guided by your goals. We dive deep into research, identifying potential risks and technological considerations. Our expertise in emerging technologies guarantees solutions that endure. Designing and Developing a Prototype: This phase separates dreams from reality. With your fixed budget and scope, we craft a prototype that tests the viability of your concept in the real world. Detailed results emerge, either confirming success or illuminating areas for improvement. Transitioning to the Next Phase: Real user interaction drives the testing of your product's functionality, ensuring a seamless consumer experience. With success assured, our nearshore team of software experts springs into action, ensuring your product enters the market swiftly, maintaining your competitive edge. Empowering Innovations: Solutions and Processes: Solutions: • Mobile Applications • Web Applications • High-Performance Applications • Desktop Applications • Integration • DWH & BI Solutions Processes: • Requirements • Scope, Timeline, Budgets • PoC Development • Demo • Application Development Deliverables: • PoC Source Code • Distributable Software Package, Ready to Deploy • PoC Report • Recommendations for Further Development • Deployment of Product to Client’s Environment ELEKS: Redefining Innovation Confidence: ELEKS PoC Development Services isn't just a service; it's a journey towards innovation-driven success. Embrace your vision, explore the uncharted, and bring ideas to life with the assurance of precision, expertise, and excellence. Join us on this transformative voyage as we pave the way for groundbreaking solutions and enduring success.
Service
Made to Order
New
New
ISO
Marlin Oil Tools in Calgary
Introducing the KNJ Knuckle Joint from Marlin Oil Tools: The Essential Downhole Tool for Enhanced Flexibility in Well Intervention Operations Marlin Oil Tools proudly presents the KNJ Knuckle Joint, a state-of-the-art downhole tool engineered to provide unparalleled flexibility to the Bottom Hole Assembly (BHA) during well intervention tasks. Designed to navigate through the most challenging sections of the well, including sharp narrows, thresholds, and various obstacles, the KNJ Knuckle Joint is an indispensable tool for ensuring the success and efficiency of well interventions. Key Features of the KNJ Knuckle Joint: Superior BHA Flexibility: The KNJ Knuckle Joint significantly enhances the flexibility of the BHA, enabling it to easily navigate through complex wellbore geometries. Overcomes Downhole Obstacles: Specifically designed to aid in overcoming difficult wellbore obstacles, the KNJ ensures smooth passage in areas that would otherwise pose significant challenges. Seamless Integration: The KNJ Knuckle Joint integrates seamlessly with other downhole tools within the BHA, providing a cohesive solution for well intervention operations. Optimized Well Intervention: By allowing for enhanced maneuverability and flexibility, the KNJ Knuckle Joint optimizes well intervention procedures, reducing the risk of tool sticking and minimizing the need for additional runs. SEO Optimized Description for Marlin Oil Tools’ KNJ Knuckle Joint: Elevate your well intervention capabilities with the KNJ Knuckle Joint from Marlin Oil Tools, a leading-edge solution designed to enhance the flexibility and maneuverability of the BHA in challenging wellbore environments. Tailored for navigating sharp narrows, thresholds, and other downhole obstacles, the KNJ Knuckle Joint is essential for any operation requiring advanced BHA adaptability. Its seamless integration with other downhole tools ensures a comprehensive approach to well intervention, making the KNJ Knuckle Joint a must-have for overcoming complex well geometries and optimizing intervention success. Why Choose the KNJ Knuckle Joint from Marlin Oil Tools? Enhanced Operational Flexibility: Maximizes BHA adaptability to navigate complex wellbore paths efficiently. Critical for Challenging Wellbores: Designed to tackle the most difficult downhole conditions, ensuring smooth operation. Increases Intervention Success: Reduces the likelihood of tool sticking and operational delays, enhancing overall success rates. Versatile and Reliable: A versatile tool that offers reliability and performance, crucial for a wide range of well intervention scenarios. The KNJ Knuckle Joint by Marlin Oil Tools represents the pinnacle of downhole tool innovation, offering operators the flexibility and reliability needed to tackle the most challenging well intervention tasks. Incorporate the KNJ Knuckle Joint into your well intervention toolkit to achieve superior performance and operational efficiency.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Canaweld Inc. in Vaughan
Introducing the Canaweld Welder Cart for Single Phase Machines - Your Ultimate Welding Companion! When it comes to welding, having the right equipment at your fingertips is essential. That's why we've designed the Canaweld Welder Cart - a sturdy and reliable cart that will keep your single-phase machines organized and accessible at all times. With its thoughtful features and robust construction, this cart is the perfect addition to your welding setup. Built for Strength and Durability: The Canaweld Welder Cart is crafted with a strong steel construction that ensures it can handle the demands of the oil and gas industry. Its powder coat finish adds an extra layer of protection, making it resistant to wear and tear from daily use. Rest assured, this cart is built to last. Maximum Convenience, Minimum Effort: Moving your welding equipment has never been easier. The front caster wheels on our cart swivel a full 360 degrees, allowing for smooth and effortless turning. No more struggling to maneuver your machines - our cart does the work for you. Ample Storage Space: Organize your welding essentials with ease. The Canaweld Welder Cart features three-tier shelves thoughtfully designed to accommodate all your portable MIG welders, stick welders, plasma cutters, and necessary accessories. Plus, there's enough room for consumables and a gas cylinder, ensuring you have everything you need at your fingertips. Secure Your Equipment: Your safety is our priority. That's why we've equipped the cart with a chain to secure the gas tank firmly in place. Worried about keeping your cables and helmet tidy? The side hook provides a convenient storage solution for them, eliminating clutter and potential hazards. Unbeatable Dimensions: The Canaweld Welder Cart boasts spacious shelf dimensions that perfectly cater to your welding equipment: • Top Shelf: 18 X 11 X 1 inches • Middle Shelf: 15.5 X 11 X 1 inches • Lower Tray: 27.7 X 11.5 X 2 inches • Gas Bottle Space: 10.2 X 11.4 X 2 inches Ultimate Load Capacity: Our cart can handle the weight. With a load capacity of 110 lbs. (50 kg), you can trust that your valuable equipment is safe and secure while on the move. Efficiency Meets Style: The Canaweld Welder Cart is more than just a functional tool - it's a sleek and stylish addition to your welding setup. Its design not only optimizes your workflow but also adds a touch of professionalism to your workspace. Upgrade Your Welding Experience: Say goodbye to the hassle of transporting your welding equipment and embrace the convenience of the Canaweld Welder Cart. It's time to work smarter, not harder. Elevate your welding experience today with Canaweld - your trusted partner in welding solutions.
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Double Insulated AWG 2/0 Cable
Welding CableCanaweld Inc. in Vaughan
Unleash the Power of Precision Welding with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2)! In the oil and gas industry, precision welding is not just a necessity; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our Welding Cable Double Insulated AWG 2/0 (67.4 mm2) is a testament to our commitment to excellence and innovation. Unparalleled Quality and Performance: Crafted with utmost precision, our welding cables are double insulated and made from 100% pure copper. The Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172 ensures outstanding conductivity, allowing you to achieve precise welds with ease and confidence. Built for Safety: Safety is paramount in welding operations, and our welding cables are designed with this principle in mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, our cables offer robust insulation, safeguarding you from potential hazards during welding tasks. Unrivaled Durability: The oil and gas industry demands cables that can withstand the harshest conditions. Our welding cables are engineered to be highly resistant to cuts, tears, and abrasions, ensuring they can handle the toughest challenges with ease. They are also built to resist oil, solvents, and chemicals, providing unparalleled durability in even the most demanding environments. Flexibility Redefined: Navigate through complex welding setups effortlessly with our welding cables' remarkable flexibility. With a minimum bending radius of 4 times the cable diameter, you can work in confined spaces and challenging angles without any hindrance. Environmental Responsibility: At Canaweld, we take our environmental responsibility seriously. Our welding cables are RoHS compliant, adhering to strict environmental standards and being free from harmful substances. When you choose Canaweld, you are not just investing in top-tier welding accessories but also contributing to a cleaner, greener world. Elevate Your Welding Experience: Experience the difference with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2). Unleash the power of precision welding and take your oil and gas projects to new heights of success. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. When it comes to welding, choose Canaweld for the ultimate in quality, safety, and performance. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers.
Buy
In Stock
Manufacturer
New
ASTM
Land Freight
HDI V9000 Choke Console System
Remote ChokeHouston Digital Instruments in Houston
Houston Digital Instruments (HDI Gauges) is proud to introduce the HDI V9000 Virtual Choke Console System, a state-of-the-art solution that revolutionizes control and monitoring capabilities for choke operations. Built on the foundation of the renowned HDI 9000 Choke Console System, the V9000 combines a user-friendly HMI interface with PLC-based technology to deliver unparalleled performance. Let's explore the features and advantages of this cutting-edge virtual console system. Advanced Control and Monitoring: At its core, the HDI V9000 Virtual Choke Console System offers a virtual representation of the HDI 9000 Choke Console System. This advanced system goes beyond monitoring capabilities and empowers users with the ability to control the HDI 9000 itself. By pairing the V9000's electronic joysticks with the 9000's hydraulic master valves, operators can locally or remotely control choke operations, providing precise and responsive control for enhanced operational efficiency. Flexibility and Customization: The HDI V9000 is designed to adapt to various client specifications, preferences, and space constraints. The system can be built on different console designs, allowing clients to tailor the V9000 to their specific requirements. Moreover, the V9000's flexibility extends to its inputs, accommodating additional parameters beyond those found on standard HDI 9000 Consoles. This includes inputs from HDI's 2250 Gate Valve Monitoring System, 3200 Mud Gas Separator Monitoring System, buffer pressure, riser pressure, sub-sea temperatures, miscellaneous pressures, and more. This versatility ensures comprehensive monitoring and control capabilities, tailored to the unique needs of each operation. Customizable Language Packages and Appearance: Recognizing the global nature of the oil and gas industry, the HDI V9000 offers full customization for language packages. Clients can select language options such as Russian, German, Portuguese, and more, enabling seamless communication and operation for international teams. Additionally, the appearance of the V9000 console can be matched to client-specific specifications, ensuring a cohesive and integrated visual experience that aligns with their branding and operational aesthetics. Seamless Integration and Future-Proof Design: The HDI V9000 Virtual Choke Console System seamlessly integrates with existing HDI 9000 Choke Console Systems, enhancing their functionality and control capabilities. This integration allows for a smooth transition to the V9000 while leveraging the investments made in the existing infrastructure. The system's future-proof design ensures compatibility with upcoming technological advancements and industry requirements, safeguarding clients' investments and providing a scalable solution for long-term operational needs. The HDI V9000 Virtual Choke Console System represents a significant advancement in control and monitoring technology for choke operations in the oil and gas industry. With its HMI interface, PLC-based functionality, and the ability to control the HDI 9000 Choke Console System, the V9000 offers unparalleled control, flexibility, and customization. Experience the power of advanced choke operation with the HDI V9000 and optimize your operational efficiency and safety. Contact HDI Gauges today to explore how the V9000 can revolutionize your choke control and monitoring capabilities.
Buy
In Stock
Manufacturer
New
API
Air Freight
Marlin Oil Tools in Calgary
Introducing the JKM Junk Mill from Marlin Oil Tools: The Ultimate Downhole Tool for Efficient Well Intervention and Milling Operations Marlin Oil Tools proudly presents the JKM Junk Mill, a premier downhole tool designed to optimize well intervention jobs by efficiently grinding and removing unwanted objects from the wellbore. Whether you're dealing with intentionally placed equipment such as bridge plugs or facing challenges with emergency lost equipment, the JKM Junk Mill is engineered to handle a variety of downhole obstacles with unmatched efficiency. Key Features of the JKM Junk Mill: Superior Milling Performance: Capable of grinding and washing out any object softer than the mill's cutters, ensuring clean and clear wellbores. Effective Debris Removal: Features multiple flushing holes for drilling fluid circulation, efficiently removing milled particles and cooling the cutting edge. Durable Carbide Construction: Equipped with carbide welded onto the body for robust milling action, available in crushed carbide and various insert designs to suit different milling needs. Customizable Milling Solutions: Offers a range of carbide welding designs including flat, concave, and convex bottoms, as well as top and side carbide surfacing, providing versatility for specific well intervention requirements. Extended Service Life: The durability of the carbide elements depends on the milling conditions, with Marlin Oil Tools providing redress services for worn carbide to ensure continued high performance. Powered by Downhole Motors: Rotation of the mill is performed by a downhole motor, enhancing milling efficiency and effectiveness. Elevate your well intervention strategies with the JKM Junk Mill from Marlin Oil Tools, a cutting-edge solution designed for the efficient removal of downhole obstacles in the oil and gas industry. Featuring advanced milling capabilities, effective debris removal, and durable carbide construction, the JKM Junk Mill ensures your wellbore is free from unwanted materials, enhancing operational efficiency and well productivity. With customizable carbide designs and comprehensive redress services, Marlin Oil Tools provides a versatile and reliable tool for tackling a wide range of milling challenges. Choose the JKM Junk Mill for its superior performance, durability, and adaptability, making it an essential component of your well intervention toolkit. Why Choose the JKM Junk Mill from Marlin Oil Tools? Enhanced Milling Efficiency: Delivers unparalleled performance in grinding down and removing wellbore obstructions. Versatile Application: Adaptable to various well intervention scenarios, from routine cleanouts to emergency equipment retrieval. Long-Term Durability: Constructed with high-quality carbide for extended tool life, even in the most challenging milling operations. Tailored to Your Needs: Offers customization options to match your specific well intervention requirements, maximizing tool effectiveness. The JKM Junk Mill by Marlin Oil Tools represents the forefront of downhole milling technology, offering oil and gas operators a powerful solution for enhancing well intervention outcomes. Incorporate the JKM Junk Mill into your operations for smoother, more effective wellbore preparation and obstacle management.
Buy
Made to Order
Manufacturer
New
API
Land Freight
bericht:
Naar: leverancier
Provix in New Lowell
Power Your Work with the ATEX Group II Battery – A High-Performance Solution from Provix Provix is proud to present the ATEX Group II Battery (Part # NWI-WLAMP3A-ATEX), a powerful and reliable energy source designed specifically for use in challenging industrial environments. This battery is an ideal choice for professionals who require dependable and long-lasting power for their mining and construction equipment. Exceptional Performance and Durability The ATEX Group II Battery is engineered to deliver outstanding performance. With a capacity of 2*3.5=7.0Ah, it offers a strong and consistent power supply, ensuring your equipment operates at peak efficiency. The battery boasts an impressive 11000 LUX and 240 Lumens, providing bright and clear illumination for a variety of tasks. Extended Runtime for Demanding Workdays One of the key features of this battery is its extended runtime. Capable of running for 13 hours on a single charge, it is perfectly suited for long shifts and continuous use. This extended runtime ensures that your equipment stays operational throughout your workday, minimizing interruptions and maximizing productivity. Compliance with ATEX Safety Standards Safety is paramount in industrial settings, and the ATEX Group II Battery adheres to the highest safety standards. It is specifically designed for use in potentially explosive atmospheres, meeting the rigorous requirements of ATEX Group II certification. This compliance ensures that the battery can be safely used in hazardous environments commonly found in mining and construction sites. Robust Construction for Industrial Use Constructed with durability in mind, the ATEX Group II Battery is built to withstand the tough conditions of industrial work environments. Its robust design ensures it can endure the rigors of daily use, providing reliable performance over time. Ideal for Mining and Construction Professionals Whether you are working in mining, construction, or any other industry where reliable power is crucial, the ATEX Group II Battery is an essential tool. Its combination of high performance, extended runtime, and compliance with safety standards makes it a top choice for professionals. Invest in Reliable Power with Provix Upgrade your equipment with the ATEX Group II Battery from Provix. Visit our website at www.provix.net to learn more about this high-quality battery and explore our wide range of specialized mining and construction equipment. Power your work with the best – choose Provix.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Midastream Supply Company in Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Shifting Tools for Downhole Tools
Downhole ToolsHoca Oil Tools in Zwartemeer
Streamline Your Downhole Operations with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the constantly evolving oil and gas industry, having the right tools for specific downhole tasks can significantly enhance operational efficiency and safety. HOCA Oil Tools specializes in providing such solutions, and our Internal Fishing Neck Pulling Tools are a prime example. These tools are meticulously engineered for the safe and efficient retrieval of downhole equipment, ensuring operations proceed smoothly without unnecessary downtime or risk. HOCA's Internal Fishing Neck Pulling Tools: Engineered for Precision and Reliability Designed to latch onto internal fishing necks of downhole tools and equipment, HOCA Oil Tools' Internal Fishing Neck Pulling Tools offer unmatched precision and reliability. These tools are integral for the retrieval process, providing a secure grip without damaging the wellbore or the equipment being retrieved. Constructed from high-quality materials and designed to meet rigorous industry standards, our pulling tools ensure successful operations under a variety of downhole conditions. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means opting for a blend of quality, innovation, and support designed to meet the specific needs of modern downhole operations. Our commitment to excellence ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your downhole operations translates into enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to your success, offering cutting-edge solutions and unparalleled service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Internal Fishing Neck Pulling Tools for their critical operations. Elevate your downhole performance with HOCA Oil Tools – where technology, innovation, and reliability converge to drive success.
Buy
In Stock
Product & Service
New
API
Air Freight
Wireless Communication Tower Construction
Nulux Networks in Edmonton
Soaring Above Communication Challenges: Nulux Network Solutions Pioneers in Wireless Tower Construction for the Oil and Gas Industry Exploration, extraction, and operational activities in the oil and gas industry are intrinsically bound to the formidable environments - remote locations, vast distances, and oftentimes, challenging terrains. Navigating through these physical barriers to establish a stable, secure, and scalable communication network necessitates innovative and robust solutions. This is where Nulux Network Solutions ascends, bridging the communication divide with unparalleled expertise in Wireless Communication Tower Construction. Pillars of Communication: Why Tower Construction Matters The landscape of the oil and gas sector demands the creation of a network that is not only extensive but also exceptionally reliable. Communication towers become the veritable backbone, linking disparate operations, ensuring data flow, and maintaining a coherence that is vital for smooth functionalities and decision-making processes. Constructing these towers, especially in the arduous terrains that characterize the oil and gas industry, requires a blend of engineering expertise, practical experience, and an acute understanding of wireless communication nuances. Nulux’s Distinction: A Synthesis of Experience and Innovation With an illustrious history in designing and implementing an array of wireless systems and infrastructures, Nulux has emerged as a leader in wireless tower construction and rigging, ensuring that the tapestry of communication across your operations, be it P2P or Multipoint networks, remains uninterrupted and secure. Adaptivity and Scalability: As your operations evolve, so does your communication network. Our towers are constructed with a forward-looking approach, ensuring they are capable of adapting to technological advancements and scalable to accommodate your expanding operational horizons. Reliability in Rigorous Environments: Our construction protocols and strategies are molded by our extensive experience in various terrains and environments, ensuring that the towers stand resilient in the face of geographical and meteorological challenges. A Mesh of Connectivity: Whether linking the executive decisions from central offices to the far-reaching extraction sites or facilitating data-driven operations across the entire network, our towers ensure that every node remains perpetually connected. Navigating Through P2P and Multipoint Networks Understanding and integrating varied network configurations such as P2P and Multipoint networks into our tower construction strategy, we ensure that the specific communicational and operational prerequisites of your business are met. End-to-End P2P Solutions: For secure, dedicated, and high-speed communication between two points, our P2P network solutions, enabled by strategically positioned towers, ensure that your data travels securely and swiftly. Expansive Multipoint Configurations: When the operational framework demands centralized communication with multiple nodes, our towers facilitate a sturdy and coherent multipoint communication network. Your Partner in Progress: Nulux Network Solutions As we stride into the future, where the fusion of technology and operations will become even more intrinsic, Nulux stands as your partner, ensuring that the wireless communication networks powering your operations are not just contemporaneous but also future-ready. Connect with us, and let’s architect a communication network that empowers, enhances, and ensures the seamless functionality of your operations in the oil and gas industry, traversing through the present and into the future.
Service
In Stock
Service
New
ISO
Midastream Supply Company in Airdrie
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
CSA 120 unit Locking FAST charger rack
Miner's Cap Lamp Charging StationProvix in New Lowell
Secure and Streamline Your Equipment Charging with the CSA 120 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 120 Unit Locking FAST Charger Rack (Part # NWI-NWCR-120BLC), a robust and efficient charging solution designed for large-scale mining, construction, and industrial operations. This high-capacity charger rack combines rapid charging technology with enhanced security, making it an essential component for any operation looking to optimize equipment readiness and safety. High-Capacity Charging for Large Operations The CSA 120 Unit Charger Rack is tailor-made for operations that require fast and efficient charging of a large number of devices. With the capacity to charge 120 units simultaneously, it offers charging times of just 4 hours for the WISE LITE2 and 5 hours for LAMP3A/4A models. This impressive speed ensures that your equipment is always ready for use, minimizing downtime and maximizing productivity. Enhanced Security with Locking Feature One of the standout features of the CSA 120 Unit Charger Rack is its locking mechanism. This added layer of security is crucial for operations where equipment safety and prevention of unauthorized access are paramount. The locking feature ensures that your valuable equipment is protected during charging, providing peace of mind and enhanced safety in the workplace. Space-Efficient Design for Busy Workplaces Despite its large capacity, this charger rack is designed with space efficiency in mind. Its single-sided configuration allows for easy placement in equipment rooms, charging stations, or in areas where space is at a premium, ensuring a streamlined and organized charging setup. Built for Durability and Reliability Constructed to withstand the demanding environments typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures it can endure daily use, offering long-term, dependable performance. Ideal for Comprehensive Charging Management The CSA 120 Unit Locking FAST Charger Rack is an ideal solution for mining companies, construction firms, and rental equipment providers managing large fleets of devices. Its ability to securely charge a significant number of units quickly makes it a valuable tool for large teams and operations. Upgrade Your Charging Infrastructure Today Invest in the Wisdom CSA 120 Unit Locking FAST Charger Rack from Provix to enhance the efficiency and security of your charging processes. Visit www.provix.net to learn more about this advanced charging solution and discover our wide range of high-quality mining equipment.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
CWB National Leasing in Winnipeg
Supercharge Your Business with Leased Computers from CWB National Leasing Are you ready to take your business to the next level, boost productivity, and enhance your profits? Look no further—CWB National Leasing is your trusted partner for leasing computers. Here's why you should choose us: Get Your Equipment Fast In today's fast-paced business environment, access to the latest technology is crucial. At CWB National Leasing, we understand the urgency of getting the equipment you need promptly. When you apply for a computer lease with us, you can expect lightning-fast decision-making. How fast, you ask? We're proud to say that we typically notify your chosen equipment dealer that payment is on its way within just 48 hours of your approval. This means you can sit back and relax while your state-of-the-art computers are delivered to your doorstep. For more details on our approval turnaround times, check out our information page. Increase Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a substantial upfront purchase, consider the advantages of periodic lease payments offered by CWB National Leasing. By opting for leasing, you can free up critical cash resources that can be invested in other essential areas of your business. But that's not all—we go a step further by allowing you to add extra features or accessories to your computer equipment for a minor payment increase. Yes, that's right; we put the "POW" in Buying Power, giving you the flexibility to customize your equipment to meet your unique needs. Control Your Cash Flow Effective cash flow management is essential for any successful business. When you lease computers with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are structured to ensure small and manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your computers, they will start earning you money while you maintain a healthy balance between expenses and revenue. This approach makes it easy to ensure a favorable expense-to-revenue ratio, putting you in control of your financial success. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are designed to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to align seamlessly with your revenue patterns. With CWB National Leasing, your computer lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing computers through CWB National Leasing isn't just a smart business decision; it can also offer potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully understand how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will help you navigate the tax advantages of leasing computers with confidence. In conclusion, leasing computers with CWB National Leasing is the strategic choice for business owners who are serious about enhancing their operations, boosting productivity, and maximizing profits. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't compromise on your technology; choose CWB National Leasing for all your computer leasing needs today!
Service
In Stock
Service
New
ISO
CWB National Leasing in Winnipeg
Enhance Your Fabrication Capabilities with Pipe Bender Leasing from CWB National Leasing Streamlining Your Operations with Cost-Effective and Flexible Equipment Solutions For businesses in the plumbing, HVAC, automotive, or construction industries, precision in pipe bending is crucial for efficient operations and quality workmanship. Leasing pipe benders through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to enhance their pipe fabrication capabilities. Here’s how leasing pipe benders can benefit your business: 1. Rapid Access to Advanced Fabrication Equipment CWB National Leasing understands the importance of having the right tools for your trade. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This ensures that your pipe benders can be delivered and operational swiftly, enhancing your production efficiency and reducing downtime. 2. Increased Financial Flexibility Leasing pipe benders with CWB National Leasing boosts your buying power. It allows you to spread costs over manageable periodic payments rather than a significant initial purchase, freeing up capital for other vital business operations. The option to add extra features or accessories to your pipe benders for a small payment increase enables customization to meet specific project requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your pipe benders start contributing to your business’s revenue while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing pipe benders can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease pipe benders through CWB National Leasing is a strategic decision that equips your business with essential fabrication equipment while maintaining financial flexibility. It ensures access to high-quality pipe benders, vital for precise and efficient pipe fabrication, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved project quality, and increased profitability, helping your business to excel in its respective industry.
Service
In Stock
Service
New
ISO
InWaTec Combined in Vechta
Retrieving Success: InWaTec Combined’s Expert Wireline Fishing Tool Services In the demanding environment of well intervention, the unforeseen loss of equipment downhole is a challenge that operators must be prepared to address promptly and efficiently. InWaTec Combined's Wireline Fishing Tool Services are the epitome of precision and reliability, providing a lifeline when well intervention tools or other equipment become unintended tenants of the wellbore. Our Wireline Fishing Tool Services are designed for success, equipped with a full spectrum of specialized mechanical tools that offer a robust solution for retrieval operations. The expertise behind our services is matched by the quality and variety of tools in our standard fishing toolbox, including: Wireline Clamp: A vital tool for securing and retrieving wireline equipment, ensuring that no further slipping occurs during retrieval operations. Wireline Grab: Our grabs are adept at latching onto equipment, providing a firm grip that is essential for the successful extraction of fallen tools. Wireline Finder: A precision instrument that aids in locating lost equipment within the wellbore, ensuring that our operations are targeted and effective. Overshots: These tools are designed to fit over and engage with the fish, facilitating an efficient recovery process. Tubular Jars: Employed to deliver impacts to dislodge stuck equipment, our jars are selected for their reliability and force-delivery precision. Heavy Duty Pulling Tool: For items that require significant force for retrieval, our heavy-duty pulling tools are up to the task, combining strength with control. Wireline Cutters: When the situation calls for severing wireline or other materials to free the fish, our cutters are engineered to slice through with minimal fuss. At InWaTec Combined, we understand that every fishing operation presents its own set of challenges. That's why our services are not only comprehensive but also customizable. We analyze the specifics of each fishing scenario and select the appropriate tools from our toolbox to ensure a successful outcome. Our team of well intervention specialists is highly trained and experienced, ready to deploy at a moment's notice to address your fishing needs. With InWaTec Combined's Wireline Fishing Tool Services, you gain more than just a service provider; you gain a partner who is as invested in the success of your operations as you are. Choose InWaTec Combined for your wireline fishing tool needs and experience the peace of mind that comes from knowing that you have the best in the business on your side. Let us help you turn setbacks into success stories with our expert fishing tool services—because in the world of well intervention, the right retrieval is everything.
Service
In Stock
Service
New
API
Land Freight
Timesheets and Resource loading Platform
KEY360KEY360 Inc in New York, NY
KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.
Service
In Stock
Service
New
ISO
Well Flow Control Valve Direct Response 4.36 inch
Injection Valve WI 4.36Midastream Supply Company in Airdrie
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Bigbore Wireline Retrievable Surface Controlled Subsurface Safety Valve 4.5 inch
WR-SCSSSV Bigbore 4.5 inchMidastream Supply Company in Airdrie
The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
CWB National Leasing in Winnipeg
Enhance Your Precision with Surveying Tool Leasing from CWB National Leasing Streamlining Your Surveying and Mapping Operations with Cost-Effective Leasing Solutions For businesses in construction, land surveying, architecture, and civil engineering, high-quality surveying tools are essential for accurate measurements and efficient project execution. Leasing surveying tools through Canadian Western Bank (CWB) National Leasing offers a smart, adaptable, and financially astute solution. Here’s how leasing surveying tools can significantly benefit your business: 1. Fast Access to Advanced Surveying Equipment CWB National Leasing understands the need for timely access to precision equipment. They offer a rapid leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround ensures that your surveying tools are delivered and ready for use promptly, enhancing your operational efficiency and project timelines. 2. Enhanced Financial Flexibility Leasing surveying tools with CWB National Leasing increases your buying power. It allows you to spread the cost over periodic payments rather than committing to a large upfront purchase, freeing up capital for other essential aspects of your business. The option to add extra features or accessories to your surveying tools for a small payment increase also allows for customization to meet your specific project needs. 3. Balanced Cash Flow Management Smaller lease payments over the term allow your surveying tools to start contributing to your business’s revenue while still being paid off. This approach helps maintain a healthy balance between expenses and income, which is crucial for business growth and financial stability. 4. Flexible Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal or variable income, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Benefits Leasing surveying tools can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to explore how leasing can optimize your business’s tax position. Conclusion Opting to lease surveying tools through CWB National Leasing is a strategic decision that equips your business with essential precision instruments while maintaining financial agility. It ensures access to state-of-the-art surveying equipment, vital for accurate and efficient project execution, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational capabilities, increased accuracy in projects, and greater profitability, helping your business to excel in its respective field.
Service
In Stock
Service
New
ISO
Canaweld Inc. in Vaughan
Discover the Powerhouse Welding Solution: Multiprocess 301-SL by Canaweld Are you in search of an industrial-grade welding machine that brings power, intelligence, and versatility to your oil and gas operations? Look no further than the Multiprocess 301-SL by Canaweld. This heavy-duty, synergetic, and intelligent welding machine is packed with advanced features, making it the ultimate choice for professional welders in the industry. Unleash Welding Excellence The Multiprocess 301-SL is an inverter-based arc welding power source optimized for MIG, Flux-Cored, Gasless Wires, TIG lift, and Stick welding, both in manual and synergic mode. Experience exceptional welding performance and a wide range of professional functions that meet the demands of industrial workshops. Its portability and ease of transport make it a reliable companion on any job site. Master Your Craft with Ease Equipped with a 5-inch color LCD display and various automatic controls, the Multiprocess 301-SL ensures quick and easy setup and operation. Both experienced welders and novices can operate the device effortlessly, reducing parameter setting time and increasing actual welding time. Synergic control provides pre-set weld parameters, improving usability and enabling operators of all skill levels to achieve precise results. Versatility at Your Fingertips No matter your welding requirements, the Multiprocess 301-SL has you covered. With the ability to perform MIG, Flux Cored, Gasless Wires, TIG lift, and Stick Welding, this machine adapts to various applications with ease. It is designed and tested to withstand the toughest conditions, ensuring reliability even in extreme heat of 104°F/40°C. Empowering Welding Precision The Multiprocess 301-SL boasts digital control of welding parameters based on the material or gas type and wire diameter, allowing for precise and efficient welding. Its manual polarity changeover feature supports the most common gas and gasless wires, Stick electrodes, and Lift TIG processes, providing flexibility in your welding tasks. Superior Wire Feeding Mechanism Canaweld's commitment to quality extends to the machine's wire feeding mechanism. The Multiprocess 301-SL features a professional and heavy-duty wire feeding system with 37mm rolls, a sealed, powerful, and durable wire feeder motor, and replaceable double groove rolls requiring no tools for replacements. Unmatched Customization Tailor your welding experience with adjustable voltage, wire speed, wave form, and burn back in the MIG process. In the TIG process, enjoy adjustable amperage, final slope, and post flow, while the Stick welding process allows for adjustable amperage, arc force, and material thickness selection. Designed for Convenience Canaweld understands the importance of easy access and movement during welding tasks. The Multiprocess 301-SL is equipped with flip doors and a specific mechanism to assist movement, allowing you to hold the doors in place at an angle for maximum ease of access. Additionally, the machine comes with lockable swivel casters for enhanced mobility. Reliable, Durable, and Worry-Free With Canaweld's comprehensive 3-year warranty, you can weld with confidence, knowing that your investment is protected. The Multiprocess 301-SL also includes two built-in eyebolts for lifting, making transportation and storage hassle-free. Join the Ranks of Industry Professionals Experience the power, precision, and versatility of the Multiprocess 301-SL by Canaweld. This welding powerhouse will elevate your oil and gas projects to new levels of efficiency and excellence. From novices to seasoned professionals, the Multiprocess 301-SL is the ultimate choice for welders who demand the best. Unlock your welding potential today with Canaweld. Invest in the future of welding technology and experience the unmatched performance of the Multiprocess 301-SL.
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Coiled Tubing Mechanical Dimple Tool
MDT, Mechanical Dimple ToolMarlin Oil Tools in Calgary
Introducing the MDT Mechanical Dimple Tool from Marlin Oil Tools: Your Essential Companion for Coil Tubing Connector Installation Marlin Oil Tools is proud to present the MDT Mechanical Dimple Tool, a specialized hand tool designed to significantly simplify the process of attaching dimple connectors to the end of coil tubing. This tool is an indispensable asset for oil and gas field operations, ensuring a secure and efficient setup of coil tubing connectors, even when dealing with connectors that have a larger diameter than the coil tubing itself. Key Features of the MDT Mechanical Dimple Tool: Reliable and Robust Design: Engineered for durability and reliability, the MDT Mechanical Dimple Tool is built to withstand the demanding conditions of oil and gas operations. Versatile Connector Compatibility: Thanks to its innovative two-half construction, the MDT allows for the mounting of dimple connectors of various sizes, providing unparalleled flexibility in connector installation. Ease of Use: Designed as a hand tool, the MDT Mechanical Dimple Tool is user-friendly and requires no specialized training for operation, making it ideal for quick and efficient use in the field. Adaptable to Coil Tubing Variations: Capable of accommodating connectors with diameters larger than that of the coil tubing, ensuring a versatile and practical solution for a wide range of coil tubing setups. Streamlined Operation: Optimizes the process of rigging up dimple connectors, significantly reducing setup time and enhancing overall operational efficiency. Field-Ready Solution: Compact and portable, the MDT is designed to be easily transported and used in various field locations, ensuring that your operations can proceed smoothly and without interruption. Maximize your coil tubing operations with the MDT Mechanical Dimple Tool from Marlin Oil Tools, a leading-edge solution designed for the efficient attachment of dimple connectors in the oil and gas industry. With its reliable design and innovative two-half construction, the MDT offers unparalleled versatility and ease of use, making it a must-have tool for securing connectors to coil tubing, regardless of diameter discrepancies. Whether you're in the field or on the rig, the MDT Mechanical Dimple Tool ensures a quick, secure, and efficient connector setup, enhancing your operational flexibility and productivity. Choose the MDT for a dependable, user-friendly solution to your coil tubing connector installation needs. Why Choose the MDT Mechanical Dimple Tool from Marlin Oil Tools? Enhanced Connector Installation Efficiency: Provides a quick and secure method for attaching dimple connectors, streamlining your operations. Superior Design for Field Operations: Built with durability and versatility in mind, ensuring reliable performance under diverse conditions. User-Friendly Operation: Designed for ease of use, enabling efficient field application without the need for extensive training. Flexible and Versatile: Adapts to a wide range of connector sizes, overcoming challenges related to coil tubing diameter variations. The MDT Mechanical Dimple Tool by Marlin Oil Tools represents the cutting edge in coil tubing equipment, offering a practical, efficient, and reliable solution for enhancing your well intervention and maintenance operations. Incorporate the MDT into your toolkit for a smoother, more efficient coil tubing connector installation process.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Tubular Manufacturing Traceability
PipeDNA is a cloud-based pipe management solutionPipeDNA in Houston
Enhancing Tubular Manufacturing Traceability with PipeDNA: Ensuring Quality and Compliance In the oil and gas industry, maintaining traceability throughout the tubular manufacturing process is crucial for ensuring quality, compliance, and operational efficiency. Introducing PipeDNA, a smart cloud-based platform dedicated to managing pipe and tube throughout the oil and gas supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage tubular manufacturing traceability, increase visibility, and optimize their operations for enhanced quality control. Comprehensive Inventory Management and Tracking: PipeDNA offers comprehensive inventory management and tracking capabilities for tubular products, enabling stakeholders to have full visibility into their manufacturing processes. From raw materials to finished products, PipeDNA allows for seamless tracking of each component, ensuring accurate inventory control, reducing waste, and optimizing production planning. Gain insights into utilization, activity, and trends, empowering stakeholders to make data-driven decisions and streamline their manufacturing operations. Streamlined Logistics Management: PipeDNA simplifies logistics management by providing stakeholders with a centralized platform to manage shipments, track status, and document crucial information. Whether it's inbound or outbound logistics, PipeDNA ensures seamless coordination and real-time visibility into the movement of tubular products. The platform also facilitates pipe bundling, allowing stakeholders to optimize transportation and storage, reducing costs and improving overall efficiency. Efficient Inspection Management: With PipeDNA's inspection management feature, stakeholders can effectively manage inspection jobs throughout the tubular manufacturing process. From initial inspections of raw materials to final product inspections, PipeDNA enables tracking and monitoring of job status across multiple sites. By streamlining inspection profiles and documentation, stakeholders can ensure compliance with quality standards, reduce errors, and maintain consistent product quality. Automated Tally Operations: PipeDNA simplifies and automates the tallying process during tubular manufacturing. Stakeholders can create and manage tally operations within the platform, eliminating manual calculations and reducing the risk of errors. By automating pipe tally jobs and workflows, PipeDNA saves time, improves accuracy, and enhances overall manufacturing efficiency. Accurate tally operations enable stakeholders to maintain reliable records and ensure traceability throughout the production cycle. Enhanced Identification and Traceability: PipeDNA's identification and traceability features provide stakeholders with quick and accurate pipe identification, detailed pipe information, activity history, and traceability documentation. By integrating popular barcode standards such as UPC, EAN, and QR codes, PipeDNA enables seamless identification and tracking of each tubular product. This enhanced traceability minimizes the risk of errors, supports efficient recalls if necessary, and ensures compliance with industry regulations. Designed for the Oil and Gas Industry: PipeDNA was designed specifically for stakeholders across drilling, manufacturing, and oilfield services, catering to their unique needs in tubular manufacturing traceability. Whether you are a drilling contractor, oilfield rental company, oilfield and inspection service provider, steel pipe manufacturer, or pipe distribution and storage provider, PipeDNA offers tailored solutions to streamline your tubular manufacturing processes and drive quality and compliance. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's emerging technologies to optimize tubular manufacturing traceability. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, allowing for efficient barcoding and labeling. Furthermore, PipeDNA is RFID ready, supporting the integration of RFID technologies for accurate asset tracking and improved traceability. The platform also enables IoT data integration using the MQTT standard, facilitating fast and reliable sensor data integration for enhanced decision-making during the manufacturing process. PipeDNA revolutionizes tubular manufacturing traceability in the oil and gas industry, providing a smart cloud-based platform that enhances quality control, compliance, and visibility. With its comprehensive inventory management, streamlined logistics operations, efficient inspection management, automated tally operations, and enhanced identification and traceability features, PipeDNA empowers stakeholders to optimize their tubular manufacturing processes, minimize errors, and ensure compliance with industry standards. Leverage the power of PipeDNA and take your tubular manufacturing traceability to new heights of efficiency and reliability.
Service
Currently in Use
Service
New
API
Air Freight
ALCiT in Mississauga
Unlock Seamless Cloud Connectivity with ALCiT's Megaport Partnership In today's digital landscape, the power of connectivity reigns supreme. ALCiT stands shoulder to shoulder with Megaport, a trailblazing company founded in Australia in 2013. Our partnership brings you a future where simplicity, control, and choice converge to transform how you connect, collaborate, and innovate. Welcome to a realm where cloud-to-cloud connections are optimized with unprecedented ease. Megaport: Shaping Connectivity with Vision Founded on the principles of simplicity, control, and choice, Megaport sets the stage for a new era of connectivity. Their mission? To empower you with the ability to shape your connections, services, and applications to align with your business's unique needs. ALCiT proudly embraces this mission, offering you the power of seamless cloud connectivity. Cloud-to-Cloud: Seamlessly and Securely Connected Megaport's hybrid cloud architecture revolutionizes cloud-to-cloud connections. Whether it's data mobility, flexibility, or affordability, Megaport ensures that your cloud-based assets seamlessly flow to where you need them. Say goodbye to complexity; say hello to convenience. Exploring Megaport's Infrastructure Benefits Simplicity at Your Fingertips: Megaport's platform offers a unified hub where all your cloud-based apps and products converge. Manage everything in one place, streamlining your operations with ease. Speed Beyond Limits: Megaport's multi-region network guarantees lightning-fast connectivity, enabling you to work anytime, anywhere. Time is of the essence, and Megaport ensures you're never left waiting. Control in Your Hands: With centralized management and adaptable bandwidth options, Megaport's solution molds to your needs. It's not just cost-effective; it's also a secure route to optimized connectivity. Shape Your Connectivity, Define Your Success ALCiT and Megaport are more than partners; we're architects of your digital future. Our collaboration reshapes how you connect, innovate, and succeed in the digital realm. Experience the power of ALCiT's partnership with Megaport.
Service
Made to Order
Service
New
ISO
Canaweld Inc. in Vaughan
Experience Unrivaled Power and Versatility with the MIG/STICK 221 Welding Machine When it comes to welding machines that blend power, portability, and versatility, the MIG/STICK 221 from Canaweld stands in a league of its own. As the most powerful welding machine in the MIG/STICK series, this exceptional unit is designed to handle the toughest welding tasks with ease, making it the go-to choice for welding professionals in the oil and gas industry. Powerful and Lightweight - The Perfect Combination The MIG/STICK 221 strikes the perfect balance between power and portability. With the ability to weld up to 3/8-inch steel in MIG or SMAW mode, this machine ensures a stable and reliable arc, allowing for precision in every weld. Its lightweight and portable design make it the ideal companion for light to medium-duty welding operations, whether in your garage, at home, or at your local auto body shop. Unmatched Features for Superior Performance At Canaweld, we believe in providing our customers with cutting-edge features that enhance their welding experience. The MIG/STICK 221 boasts an array of features that set it apart from the rest: • Wide range of welding amperage up to 220A, giving you the flexibility to handle various welding applications with ease. • High power output, with 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, ensuring consistent performance during demanding tasks. • Designed to withstand extreme environments, the MIG/STICK 221 is tested in temperatures of 104°F/40°C, guaranteeing reliable operation under challenging conditions. • Inverter power supply with excellent MIG and Stick welding qualities, providing smooth and precise welds. • Automatic compensation for main power fluctuations within ± 20%, ensuring a stable welding process. • Capability to use up to 165 feet (50 meters) of lead without any power loss at the weld, offering extended reach for your welding projects. • High-quality metal double drive roll system for accurate and consistent wire feed, preventing bird nesting and improving efficiency. • Welds steel and aluminum up to 3/8″ thick, allowing you to tackle a wide range of materials with ease. • Graduated knob for precise settings, giving you full control over your welding parameters. • Automatic regulation of wire speed using motor voltage feedback, providing an exceptionally steady arc with minimum splatter for high-quality welds. • Overheat prevention with a fan and thermal protection, ensuring the longevity of your welding machine. • Built-in polarity changeover feature for most common gas and gasless wires, enhancing welding flexibility. • Durable metal face panel for added protection and longevity. Elevate Your Welding Experience with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld leads the way with innovative technology and unmatched performance. The MIG/STICK 221 is a testament to our commitment to delivering excellence in every product we offer. Unlock the true potential of your welding operations with the MIG/STICK 221. Experience the power, precision, and reliability of Canaweld's welding solutions, and take your welding projects to new heights. Choose Canaweld for Your Welding Needs With a comprehensive 3-year warranty and a track record of delivering top-notch products, Canaweld is the name you can trust for all your welding requirements. Join the league of welding professionals who rely on the MIG/STICK 221 for exceptional results and unmatched performance. Upgrade your welding capabilities today with Canaweld's MIG/STICK 221. Invest in excellence and elevate your welding experience to a whole new level.
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Boost operational efficiency with automation
Software DevelopmentEleks in Toronto
Transforming Efficiency: Elevate Your Operations with ELEKS Experience a new level of operational efficiency with ELEKS' custom software development and data science services. Our cutting-edge solutions empower utility companies to embrace intelligent automation, optimizing complex processes and workflows across logistics, inventory management, warehousing, production planning, billing, and consumer management. With ELEKS as your partner, you can streamline your operations, achieve peak efficiency, and realize substantial cost savings. Empower Your Operations with ELEKS Energy Software Development: Embrace an advanced energy management software solution that revolutionizes productivity, accessibility, safety, and sustainability within your business power system. Intelligent Automation Expertise: Our custom software development and data science services enable you to adopt intelligent automation for critical processes. Say goodbye to repetitive, labor-intensive tasks and hello to efficiency and accuracy. Real-Time Insights: Gain real-time data on your operational conditions. Our solutions provide you with up-to-the-minute insights that help you make informed decisions and stay ahead of challenges. Minimize Errors and Costs: Automation minimizes human errors, reducing the risk of costly mistakes in critical processes. Achieve cost savings by optimizing workflows and minimizing resource wastage. Why Choose ELEKS? Proven Excellence: ELEKS boasts a 30-year legacy of excellence in custom software development. Our solutions are tried, tested, and trusted by energy producers, distributors, and governmental organizations. Cutting-Edge Innovation: Stay ahead of the curve with our utilization of cutting-edge technologies, including Cloud, IoT, blockchain, and data-driven solutions. Our software development team is equipped to address the evolving needs of the energy and utility industry. Tailored to Your Needs: Our solutions are tailored to your specific requirements, ensuring that you receive a technology platform that seamlessly integrates into your existing workflows. Revolutionize Your Operations: Join the ranks of industry leaders who are revolutionizing their operations through intelligent automation. With ELEKS as your partner, you can optimize processes, enhance accuracy, and unlock significant cost savings. Lead the Change with ELEKS ELEKS' custom software development and data science services empower utility companies to take charge of their operations, embracing automation for lasting efficiency gains. Say goodbye to manual, error-prone processes and hello to streamlined workflows and real-time insights. Take your operations to the next level – choose ELEKS as your partner in transformation.
Service
Made to Order
Service
New
ISO
CWB National Leasing in Winnipeg
Supercharge Your Business with Leased Radios from CWB National Leasing Are you ready to take your business to the next level, boost your efficiency, and increase your profits? Look no further because CWB National Leasing is your trusted partner when it comes to leasing radios. Here's why choosing us is the smart move for business owners like you: Get Your Equipment Fast In today's fast-paced business world, time is of the essence. At CWB National Leasing, we understand the need for speed, and we've streamlined our process to be lightning-fast. When you apply for a radio lease, you won't be kept waiting. In fact, we take pride in delivering rapid decisions on your lease application. Just how fast are we? Typically, we'll notify your chosen equipment dealer that payment is on its way within a mere 48 hours of your approval. So, while you focus on running your business, you can trust us to handle the logistics, ensuring your radio equipment is delivered promptly. For more details on our approval turnaround times, take a look! Increase Your Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a substantial upfront purchase, consider the advantages of periodic lease payments offered by CWB National Leasing. By opting for leasing, you can free up critical cash resources that can be invested in other essential areas of your business. But that's not all—we go a step further by allowing you to add extra features or accessories to your radio equipment for a minor payment increase. Yes, that's right; we put the "POW" in Buying Power, giving you the flexibility to customize your equipment to meet your unique needs. Control Your Cash Flow Effective cash flow management is crucial for any successful business. When you lease radios with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are structured to ensure small and manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your radio equipment, it will begin generating revenue for your business. This approach makes it easy to strike the right balance between expenses and revenue, putting you in control of your financial success. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are designed to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to align seamlessly with your revenue patterns. With CWB National Leasing, your radio lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing radios through CWB National Leasing isn't just financially prudent; it can also offer potential tax benefits for your business. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully understand how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will help you navigate the tax advantages of leasing radios with confidence. In conclusion, leasing radios with CWB National Leasing is the strategic choice for business owners who are serious about success. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't miss the opportunity to supercharge your business; choose CWB National Leasing for all your radio leasing needs today!
Service
In Stock
Service
New
ISO
HDI 1000B Pressure Gauge System
Electronic Pressure GaugeHouston Digital Instruments in Houston
Houston Digital Instruments (HDI) is excited to present the 1000B Pressure Gauge System, a high-performance solution designed to meet your pressure measurement needs. With its intrinsically safe, solid-state electronic design, this gauge system provides accurate and easily readable pressure readings in any lighting conditions. Unparalleled Readability and Accuracy: The 1000B Pressure Gauge System is engineered to deliver exceptional readability, ensuring that you can access crucial pressure information with ease. Regardless of the lighting conditions in your environment, the gauge's display remains clear and easily visible. With a measurement range of up to 20,000 psi and an accuracy of 0.50% of full scale, you can trust that your pressure readings are precise and reliable. Versatile Application: The 1000B is designed to serve as either a primary or secondary display, offering flexibility for your specific requirements. With slave/secondary display options available, you can easily integrate the gauge system into your existing setup. Each 1000B consists of a Gauge Display, Inline Cable, and Sensor Assembly, allowing for convenient placement of the display relative to the connection point. Benefit from the versatility and adaptability of our field-proven platform, which has been refined over 30 years of industry experience. Durability and Low Maintenance: At HDI, we prioritize safety, accuracy, reliability, and low maintenance for our customers. The 1000B Pressure Gauge System is battery-powered, eliminating the need for external power sources and providing hassle-free operation. With a field repairable system, you can minimize downtime and reduce maintenance costs, ensuring continuous and efficient pressure monitoring. The low battery indicator keeps you informed of the system's power status, enabling you to stay prepared and maintain uninterrupted performance. Tailored to Your Application: The 1000B can be combined with various sensor types for pressure, load, force, and torque applications in a wide range of industries. Our team of experts is ready to assist you in selecting the optimal configuration for your specific needs. Whether you require 2" Male NPT, 2" 1502, 2" 2002/2202, or flanged connections, we offer customization options to seamlessly integrate the gauge system into your setup. Achieve accurate and reliable pressure measurements that meet your unique application requirements. Exceptional Performance in Demanding Environments: We understand that certain industries present challenging conditions, including high vibration environments. The 1000B Pressure Gauge System is engineered to deliver consistent performance, even in such demanding settings. With its solid-state platform, free from fluids or moving parts, the gauge system ensures durability and reliable operation in the face of vibrations and harsh environmental conditions. Expand Your Measurement Capabilities: Upgrade your pressure measurement capabilities with the 1000B Pressure Gauge System. Benefit from its reliable performance, durability, and ease of use. With configuration options such as 4-20mA output, 4-20mA input, backlighting, externally powered options, 0-1 volt output, and secondary display compatibility, you can tailor the system to your specific requirements. Contact Houston Digital Instruments today to discuss your specific application needs. Our team of experts is dedicated to helping you select the ideal solution for your pressure measurement requirements. Trust HDI for excellence in measurement and monitoring solutions. Together, we'll achieve efficiency, safety, and success.
Buy
In Stock
Manufacturer
New
API
Air Freight
Lovat Gas Solutions in Edmonton
Leading the Way in Mobile Energy Solutions: Cost-Effective, Clean, and Renewable Lovat Gas Solutions is proud to be at the forefront of delivering cutting-edge mobile energy solutions to a wide range of industries, including utilities, mining, oil & gas, and other industrial sectors. Our goal is simple: to provide cost-effective, clean alternative, and renewable energy solutions that meet the diverse needs of our clients. Why choose Lovat Gas Solutions for your mobile energy needs? 1. Cost-Effective Solutions: We understand the importance of cost efficiency for our clients. Our team of experts is dedicated to designing and implementing mobile energy solutions that optimize your energy consumption, reduce expenses, and enhance operational efficiency. We work closely with you to develop strategies that deliver significant cost savings without compromising on performance or reliability. 2. Clean Alternative Energy: Embracing the shift towards cleaner energy sources, Lovat Gas Solutions offers a range of clean alternative energy solutions. Whether it's through the utilization of natural gas, renewable natural gas (RNG), hydrogen, or other sustainable energy options, we help you reduce your carbon footprint and contribute to a greener future. 3. Renewable Energy Expertise: As renewable energy continues to gain momentum, our team stays at the forefront of developments and innovations in the industry. We possess the expertise and experience to integrate renewable energy sources into your mobile energy solutions, harnessing the power of solar, wind, bioenergy, and more. 4. Industry Focus: With a deep understanding of the specific needs and challenges faced by utilities, mining companies, oil & gas operators, and industrial end-users, we tailor our mobile energy solutions to suit your industry requirements. We have a proven track record of delivering exceptional results across these sectors, ensuring that our solutions are aligned with your unique operational demands. Partner with Lovat Gas Solutions to access cost-effective, clean alternative, and renewable energy solutions. We are committed to providing you with the most advanced mobile energy technologies and strategies that deliver tangible benefits to your business. Contact us today to discuss your specific mobile energy needs and let our experienced team design a customized solution that propels your operations forward. Together, let's lead the way in mobile energy solutions and drive success for your business with Lovat Gas Solutions.
Service
In Stock
Service
New
ISO
Land Freight
Surface Controlled Annular Vent and Sleeve Valve 2 inch
Annular Sleeve ValveMidastream Supply Company in Airdrie
An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Sivam S.p.A. in Spoltore
Attention all oil industry businesses in need of high-quality workbenches for disassembling cross-coupling protectors – Sivam has got you covered! Our workbenches are specifically designed for the task of disassembling cross-coupling protectors, ensuring that your team can work safely and efficiently. At Sivam, we pride ourselves on our commitment to using only the highest quality materials in our products. Our workbenches are built to last, with exceptional durability and reliability that ensures your team can work with confidence. We understand that precision and accuracy are crucial when it comes to disassembling cross-coupling protectors. That's why our workbenches are designed to provide a stable and secure platform for the task. Our workbenches are also equipped with a range of additional features to help your team work more efficiently and effectively. Our team at Sivam understands the importance of meeting our clients' needs. That's why we work closely with our customers to design workbenches that meet their exact specifications. We take pride in providing exceptional customer service, and our commitment to quality is second to none. When it comes to disassembling cross-coupling protectors, Sivam is the name you can trust. Choose us for all your workbench needs and take your operations to the next level. Contact us today to learn more about our products and services and see how we can help you get the job done right!
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Receive and Manage Multiple Currencies
Business FX ServicesDunbridge Financial in Oakville
Unlock Financial Flexibility with Dunbridge Financial: Seamlessly Receive and Manage Multiple Currencies As a thriving business, staying ahead of the game requires financial flexibility and efficiency. At Dunbridge Financial, we understand the importance of streamlining your accounting processes and handling overseas expenses with ease. Our financial service empowers your organization to receive and manage multiple currencies effortlessly, giving you the edge you need to succeed in the global market. Simplify Accounting Processes and Manage from Your Current Organization Accounting can be complex, especially when dealing with multiple currencies from different international transactions. With Dunbridge Financial, you gain access to a powerful platform that simplifies your accounting processes, allowing you to manage your financials seamlessly from your current organization. No more struggling with disparate accounts and confusing currency conversions - we bring clarity and coherence to your financial management. Overseas Expenses Handled with Ease for the Company and Employees Overseas expenses shouldn't be a burden for your company or your employees. With Dunbridge Financial, you can effortlessly handle overseas expenses, ensuring that transactions are executed smoothly and efficiently. Your employees can focus on their core responsibilities, knowing that their expenses are managed with ease, and your company can maintain control and visibility over international financial matters. Why Choose Dunbridge Financial for Managing Multiple Currencies? 1. Effortless Currency Management Our platform allows you to receive and manage multiple currencies all in one account. Say goodbye to the complexities of juggling various accounts, and enjoy the convenience of centralized currency management. 2. Real Accounts in Your Company's Name With Dunbridge Financial, you receive real accounts in your company's name, providing a professional and trustworthy image to your global partners. Receive like a local with IBAN, ACH, SEPA capabilities, ensuring smooth and seamless transactions. 3. Secure and Compliant Your financial security is our top priority. Our payment service partners adhere to industry standards like ISO27001, ensuring that your funds and data are protected with the highest level of security. 4. Expert Support Navigating international finances can be complex, but not with Dunbridge Financial. Our dedicated account managers are here to provide you with expert support, helping you make informed decisions and manage your multiple currencies effectively. Join Us Today and Embrace Financial Flexibility Don't let multiple currencies hinder your financial growth. Join Dunbridge Financial today and experience the power of seamless currency management. Simplify your accounting processes, handle overseas expenses with ease, and empower your organization to thrive in the global landscape. Seize the Opportunity with Dunbridge Financial By choosing Dunbridge Financial, you gain a competitive edge in managing multiple currencies. Streamline your financial operations, boost efficiency, and take your organization to new heights. Experience the Difference Unlock a world of financial flexibility and efficiency with Dunbridge Financial. Sign up now and embrace a seamless currency management experience. Simplify your accounting processes, manage overseas expenses effortlessly, and elevate your financial capabilities. The future of international finance starts here.
Service
Made to Order
Service
New
ISO
Air Freight
Hoca Oil Tools in Zwartemeer
Unlocking Efficiency with HOCA Oil Tools B.V.'s Advanced Slickline Blind Boxes In the complex world of oilfield services, particularly within the realm of slickline operations, the versatility and precision of downhole tools are of paramount importance. At HOCA Oil Tools B.V., we take pride in our comprehensive range of slickline blind boxes, designed to enhance operational efficiency and safety in the oil and gas industry. Our Type ‘A’ Blind Box series demonstrates our commitment to innovation and quality, catering to a wide range of operational needs. Main Features of HOCA's Slickline Blind Boxes: Diverse Size Range: Available in nominal sizes from .375 inches to 6.687 inches, catering to a broad spectrum of wellbore sizes and wireline operations. High-Quality Materials: Manufactured using robust materials, our blind boxes are designed to withstand the rigors of downhole environments, ensuring reliable performance. Precision Engineering: The precision in crafting each blind box, from threading to length specifications, ensures optimal performance and compatibility with existing slickline tool strings. Customization: Besides standard sizes, we offer custom orders to meet unique operational needs, ensuring that all aspects of the blind box, from thread type to length, are tailored to client specifications. Operational Efficiency: Designed for easy integration and use, our blind boxes help streamline slickline operations, reducing downtime and enhancing overall efficiency. Technical Support: HOCA Oil Tools B.V. provides comprehensive technical support, ensuring that our clients have the guidance needed to select and utilize the most appropriate blind boxes for their operations. At HOCA Oil Tools B.V., we understand the critical nature of slickline operations in the oil and gas industry. Our slickline blind boxes are a testament to our commitment to quality, innovation, and customer service. Choose HOCA for your downhole tool needs and experience the difference that professional-grade tools, backed by industry-leading support and expertise, can make in your operations
Buy
In Stock
Product & Service
New
API
Air Freight
Simplify Your International Transactions
Business FX ServicesDunbridge Financial in Oakville
Unlock Global Success with Dunbridge Financial's Business Services: Simplify Your International Transactions As a thriving international business, you understand the importance of efficient and cost-effective financial solutions. At Dunbridge Financial, we are your trusted partner in navigating the complexities of global commerce. Our Business Services are tailor-made to help you streamline your international transactions, ensuring you stay ahead of the competition and achieve new heights of success. Pay Invoices with Foreign Exchange Advantage Paying suppliers in local currency gives you a strategic edge, providing access to foreign exchange advantages and better pricing. With Dunbridge Financial, you can take full advantage of these benefits, empowering your business with optimized financial transactions. One Platform for All Your International Business Needs With Dunbridge Financial, managing your international business has never been easier. Experience the convenience of our elegant platform, where you can collect, manage, and pay foreign currencies seamlessly, all from one centralized location. Say goodbye to complexity and uncertainty in your international dealings - we are here to make it simple and secure. Concierge Customer Service - Your Success Is Our Priority At Dunbridge Financial, we believe in embedding ourselves with our customers to understand their unique needs thoroughly. Every customer is assigned a dedicated account manager who will work closely with you to develop a tailored payment strategy that aligns with your business goals. Take the complexity out of your FX payment strategy and let us guide you towards success. Fast and Secure International Payments Time is of the essence in the global marketplace, and Dunbridge Financial is here to ensure your international payments are fast and secure. With our global banking relationships, you can make cost-effective international payments to over 100 currencies and 120 countries. Our market-leading platform, compliant with ISO27001, guarantees your transactions are safe and protected. Multi-Currency Accounts in Your Company's Name Simplify your financial management with multi-currency accounts, all in your company's name. With Dunbridge Financial, you can receive and manage multiple currency balances seamlessly within a single account. Real accounts in your company's name enable you to receive like a local, with IBAN, ACH, and SEPA capabilities. Additionally, you have the flexibility to transfer funds between currencies as needed, empowering you with financial agility. Streamline with Mass Payments Take the burden out of your accounts payable processes with Dunbridge Financial's Mass Payments feature. Easily upload, manage, and pay up to 1000 payees at once, saving time and effort in your financial operations. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider - we are your strategic partner in achieving global success. When you choose us, you gain access to: • A free global business account within 24 hours • An elegant platform that simplifies international transactions • Expert concierge customer service that is tailored to your needs • Fast and secure international payment capabilities • Multi-currency accounts for seamless financial management • Streamlined mass payments to optimize your AP processes Join Us Today and Thrive in the Global Arena Embrace the power of Dunbridge Financial's Business Services and take your international business to new heights. Simplify your international transactions, seize foreign exchange advantages, and secure better pricing for your business. With us by your side, you'll experience seamless financial management, leaving you with more time to focus on what truly matters - your business's growth and success. Empower your business with Dunbridge Financial. Sign up now and unlock the keys to global triumph. Your journey to success begins here.
Service
Made to Order
Service
New
ISO
Air Freight
CWB National Leasing in Winnipeg
Enhance Accessibility and Efficiency with Ramp Leasing from CWB National Leasing Facilitating Smooth Operations with Cost-Effective and Flexible Solutions For businesses requiring enhanced accessibility and efficient movement of goods, vehicles, or equipment, ramps are an essential asset. Leasing ramps through Canadian Western Bank (CWB) National Leasing offers a smart, adaptable, and financially sound solution for businesses looking to improve their operational flow. Here’s how leasing ramps can benefit your business: 1. Quick Access to Essential Equipment CWB National Leasing values the importance of maintaining smooth operations in your business. They offer a swift leasing process, typically approving applications and arranging payment within 48 hours. This rapid service ensures that your ramps can be delivered and functional quickly, enhancing accessibility and efficiency in your operations without significant delay. 2. Increased Financial Flexibility Leasing ramps with CWB National Leasing boosts your financial agility. It allows you to leverage periodic payments over a substantial initial purchase, freeing up capital for other vital business needs. The option to add extra features or accessories to your ramps for a small payment increase enables customization to meet specific operational requirements. 3. Effective Cash Flow Management With manageable lease payments over the term, your ramps start contributing to your business’s operational efficiency while still being paid off. This approach helps maintain a healthy balance between expenses and revenue, crucial for the financial health and growth of your business. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is especially beneficial for businesses with seasonal fluctuations in income, ensuring that payments are manageable and aligned with your financial capacity. 5. Potential Tax Benefits Leasing ramps can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position.
Service
In Stock
Service
New
ISO
Venturi Junk Basket for Coiled Tubing Applications
VJB Venturi Junk BasketMarlin Oil Tools in Calgary
Introducing the VJB Venturi Junk Basket from Marlin Oil Tools: The Advanced Solution for Efficient Well Cleanout Operations Marlin Oil Tools is proud to unveil the VJB Venturi Junk Basket, a cutting-edge downhole tool engineered to tackle the challenge of removing solid debris from wells, especially when particles are too heavy for standard circulation removal. This innovative tool is designed to enhance well intervention procedures, ensuring a clean and unobstructed wellbore essential for optimal production and operational safety. Key Features of the VJB Venturi Junk Basket: Venturi Effect Cleaning: Utilizes the Venturi effect, generated by flow through the tool's nozzles, to efficiently suck solid debris and well fluid into the basket for removal. Selective Debris Filtration: Features a filter that captures large particles (>3 mm in diameter) while allowing liquid to return to the annulus, ensuring effective debris removal without losing valuable well fluids. Secure Debris Retention: Equipped with cartridges and flapper valves inside the basket to securely hold debris, even when circulation is halted, preventing backflow. Magnetic Debris Capture: Offers the option to install a magnet within the tool, enhancing the capture of small metal particles and ensuring a thorough cleanout. Expandable Collection Volume: Can be fitted with an extended housing to increase the internal volume for debris collection, accommodating larger cleanout operations. Integrated Milling Capability: When faced with compressed debris, the VJB can be mounted on a downhole motor with a crown mill shoe, allowing for the milling of compressed debris while simultaneously sucking up drilled particles. Elevate your well cleanout operations with the VJB Venturi Junk Basket from Marlin Oil Tools, a premier downhole tool designed for the efficient removal of solid debris in oil and gas wells. By harnessing the Venturi effect, the VJB enhances debris removal capabilities, particularly for heavy particles that are difficult to extract via standard circulation. With its innovative features, including selective filtration, secure debris retention, and optional magnetic capture, the VJB Venturi Junk Basket is an essential tool for maintaining well integrity and optimizing production. Whether dealing with loose or compressed debris, the VJB offers customizable solutions, including expandable collection volumes and integrated milling functionality, making it a versatile choice for comprehensive well cleanout needs. Why Choose the VJB Venturi Junk Basket from Marlin Oil Tools? Enhanced Cleanout Efficiency: Leverages the Venturi effect for superior debris removal performance. Versatile Debris Management: Captures a wide range of particle sizes, from large solids to small metal fragments. Customizable Tool Options: Adaptable design with optional extensions and magnetic capabilities to suit specific operational needs. Operational Versatility: Suitable for both loose and compressed debris, ensuring thorough well cleanout under various conditions. The VJB Venturi Junk Basket by Marlin Oil Tools represents the forefront of well cleanout technology, offering unparalleled efficiency and adaptability in debris removal operations. Incorporate the VJB into your well maintenance and intervention strategies for cleaner, safer, and more productive wells.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Hoca Oil Tools in Zwartemeer
Optimizing Downhole Operations with HOCA Oil Tools B.V.'s Slickline Tool Strings In the world of oil and gas, the efficiency and reliability of downhole operations are paramount. HOCA Oil Tools B.V. stands at the forefront of this industry, providing innovative slickline tool string solutions that cater to the complex needs of modern well interventions. Our comprehensive range of slickline tool strings is designed to enhance operational flexibility, precision, and safety, ensuring that our clients can tackle downhole challenges effectively and efficiently. Six Key Benefits of HOCA's Slickline Tool Strings: Versatility in Application: Our slickline tool strings are crafted to perform a wide array of downhole tasks, from routine maintenance to complex problem-solving interventions, providing operators with the tools necessary for any scenario. Enhanced Operational Efficiency: Precision-engineered for optimal performance, our tool strings reduce non-productive time by enabling quicker and more effective downhole operations, from logging to perforation and beyond. Customization and Flexibility: We offer a variety of tool string components, allowing for complete customization based on specific operational requirements and wellbore conditions, ensuring the right tools are always at hand. Superior Material and Construction: Constructed with high-quality materials, our slickline tool strings withstand the harsh downhole environments, ensuring durability and longevity while minimizing the risk of tool failure. Improved Safety and Reliability: Our tool strings are designed with safety and reliability at their core, incorporating features that minimize risks to both personnel and equipment, thereby enhancing overall operational safety. Technical Support and Expertise: With HOCA Oil Tools B.V., clients gain not just superior slickline tool strings but also the backing of our extensive expertise and support, ensuring that any issues can be swiftly addressed and resolved. HOCA's Diverse Array of Slickline Tool Strings: Our slickline tool strings are composed of several key components, each designed for specific functions within the downhole environment: Rope Sockets: These are essential for connecting the wireline to the tool string, available in various sizes and types to suit different wire sizes and operational needs. Swivel Joints: Incorporated to minimize wire twisting during operations, our swivel joints ensure smoother deployment and retrieval of tool strings, reducing the risk of wireline damage. Stems (Weight Bars): Used as weights to counteract well pressure and assist in lowering the tool string into the wellbore, our stems also play a crucial role in jarring operations by providing the necessary impact force. Jars: These components are crucial for delivering impacts within the wellbore to dislodge stuck tools or debris. Our jars are designed for both upward and downward jarring actions, tailored to the needs of the operation. Accelerators: Used in conjunction with jars, accelerators store additional energy to increase the impact force, enhancing the effectiveness of jarring operations. Knuckle Joints: Providing flexibility to the tool string, knuckle joints allow for angular movement, facilitating navigation through deviated sections of the wellbore. Each component of our slickline tool strings is engineered to the highest standards, ensuring compatibility, performance, and reliability. With sizes ranging from 3/8” to 2 1/2” and options for both threaded connections and Quick Lock Systems (QLS), HOCA Oil Tools B.V. offers comprehensive solutions tailored to the diverse needs of the oil and gas industry. In conclusion, HOCA Oil Tools B.V. is your trusted partner for slickline tool strings, combining innovation, quality, and service to optimize your downhole operations. Choose HOCA for your wireline needs and experience the difference that professional-grade tools and unparalleled support can make in your well intervention and maintenance tasks.
Buy
In Stock
Product & Service
New
API
Air Freight
Log in om favoriet toe te voegen