Partnered with Dell Technologies

Introducing Safe-T-Whip RD-2-01 4’: Your Ultimate Safety Restraint for Extreme Pressure Environments Safety is paramount in the oilfield industry, and at Safe-T-Whip & Restraints Inc., we take it to heart. We are thrilled to present our latest innovation - the SW-RD-2-01 Safe-T-Whip RD, designed to provide unmatched safety and reliability even in the most extreme pressure environments. Unmatched Design and Performance: Identified by its bold yellow color and yellow tag, SW-RD-2-01 Safe-T-Whip RD is crafted from 1/2" 12-Strand HMPE fiber, making it a "Regular Duty" (RD) safety restraint. This powerful safety whip is engineered for use on 2-inch 1502 hammer union pipelines up to a staggering 15,000psi or 3-inch iron up to 10,000psi. When it comes to restraining high-pressure flowlines, trust Safe-T-Whip RD-2-01 to deliver the highest level of protection. Revolutionary Modulus Synthetic Fiber: Safe-T-WhipTM harnesses the power of high modulus polyethylene (HMPE), also known as ultrahigh molecular weight polyethylene (UHMWPE). Ropes made from this synthetic material are as strong as steel-wire ropes, yet significantly lighter, making them easy to handle, store, and haul. The durability and lightness of SW-RD-2-01 save precious time and money for rig hands and operators alike. Built for Extreme Conditions: The Canadian oil patch presents demanding drilling and fracking conditions. That's why Safe-T-Whip RD-2-01 is designed to withstand the toughest challenges. Easy to pressure hose and impervious to corrosion, oil spills, and most chemicals, our safety restraints thrive in the harshest environments, ensuring your team's safety is never compromised. Chemical Immersion and Temperature Resilience: SW-RD-2-01 exhibits exceptional strength retention after 6-month immersion in various chemicals, including sea water, hydraulic fluid, gasoline, hydrochloric acid, and more. It operates efficiently within a wide temperature range from -65°C to +65°C, making it ideal for the extreme temperatures often encountered in the oilfield. Our safety restraint system is also chemically inert, ensuring it remains steadfast over time. Certified and Tested for Quality: Your safety is our priority, and that's why we provide test and engineer reports, as well as certificates, available upon request. Our commitment to quality and excellence ensures that every Safe-T-Whip RD-2-01 undergoes rigorous testing to meet the highest industry standards. Your Partner in Safety: When it comes to safety in extreme pressure environments, Safe-T-Whip & Restraints Inc. is your reliable partner. Trust in the power of SW-RD-2-01 Safe-T-Whip RD to protect your workforce, equipment, and operations, ensuring compliance with safety regulations and delivering peace of mind to you and your team. Invest in Safe-T-Whip RD-2-01 4' and experience unparalleled safety in high-pressure environments. With Safe-T-Whip & Restraints Inc., your safety is always secured.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer

Introducing the BPV (Back Pressure Valve) from Marlin Oil Tools: The Essential Safety Barrier for Coiled Tubing Operations in the Oil and Gas Industry Marlin Oil Tools is proud to present our BPV (Back Pressure Valve), a paramount downhole tool designed to enhance safety and operational integrity during well intervention tasks. Engineered with precision and reliability, the BPV is an indispensable component for maintaining control over well pressure and ensuring the protection of coiled tubing (CT) from potential hazards. Here's a detailed look at the BPV's design, functionality, and benefits, making it a must-have tool for any oil and gas operation. Key Features of the BPV (Back Pressure Valve): Directional Fluid Flow Control: The BPV is designed to allow fluid flow exclusively in one direction—downwards. This capability is crucial for preventing backflow and maintaining operational control during well intervention processes. Dual Flapper Valve System: Equipped with two duplicate cartridges featuring reliable flapper valves, the BPV offers an enhanced level of safety and redundancy. This double flapper back pressure valve system ensures that even if one valve encounters an issue, the other can continue to function effectively, providing an uninterrupted safety barrier. Comprehensive Well Pressure Control: The primary function of the BPV is to act as a safety barrier, preventing well fluids from entering the coiled tubing through the bottom of the Bore Hole Assembly (BHA). This function is vital for the safety of operations and the preservation of equipment integrity. Protection Against Mechanical Particles and Aggressive Environments: In addition to controlling well pressure, the BPV serves an auxiliary role in protecting the coiled tubing from mechanical particles and potentially aggressive well environments, such as those containing H2S and CO2. These elements can cause significant damage to the CT if allowed entry, making the BPV's protective capability critical for long-term equipment durability. Essential Tool for Every Job: Given its crucial safety and protective functions, the BPV is typically run on each well intervention job, underscoring its importance in the toolkit of downhole operations. Elevate your well intervention safety and efficiency with the BPV (Back Pressure Valve) from Marlin Oil Tools, a leading solution in oil and gas coiled tubing tools. Designed for downhole applications, the BPV features a double flapper valve system to ensure fluid flows only downwards, creating an effective barrier against well pressure. This safety essential prevents well fluid backflow into the CT, offering protection from mechanical particles and harsh environments like H2S and CO2. With dual reliable cartridges, the BPV is a critical component for every well intervention job, safeguarding both personnel and equipment by maintaining operational integrity and preventing damage from aggressive well conditions. Why Choose the BPV from Marlin Oil Tools? Unparalleled Safety and Control: Provides a reliable safety barrier for well pressure control, crucial for operational safety. Dual Valve Redundancy: Ensures continued operation and safety even if one valve fails, thanks to its double flapper valve design. Comprehensive Protection: Guards coiled tubing against mechanical damage and corrosion from aggressive well environments. Operational Necessity: An indispensable tool for every well intervention job, highlighting its importance in maintaining a safe and efficient operation. The BPV (Back Pressure Valve) by Marlin Oil Tools represents the pinnacle of safety and efficiency in coiled tubing operations within the oil and gas industry. Incorporate the BPV into your operations to ensure the highest standards of safety and equipment integrity. Contact Marlin Oil Tools today to learn more about how our innovative solutions can support your operational needs.

Industrial Cleaning with the 4-Litre EnviroBlu: The Future of Efficiency and Sustainability At Mekapisk EnviroBlu Solutions Inc., we believe in pushing the boundaries of what’s possible in industrial cleaning. Imagine a cleaner that’s tough enough to handle the biggest jobs yet compact enough to manage with ease. Introducing our 4-litre EnviroBlu cleaner—a marvel of engineering designed to transform your cleaning routine. This isn’t just a cleaner; it’s a revolution in how we approach maintenance and sustainability. The Power of EnviroBlu Efficiency and Speed In an industry where time is money, every second counts. EnviroBlu’s advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring a quick and thorough clean. Whether you’re dealing with industrial machinery, large equipment, or expansive surfaces, EnviroBlu makes the job faster and easier. Imagine cutting your cleaning time in half—that’s the power of EnviroBlu. Cost Savings Efficiency isn’t just about speed; it’s also about reducing costs. EnviroBlu’s potent formula means you use less product to achieve superior results. This translates to significant cost savings over time. Our 4-litre size is perfect for big cleaning jobs, providing enough product to tackle extensive tasks without the need for frequent resupply. Lower product usage, less downtime, and fewer purchases—all adding up to a healthier bottom line. Environmental Stewardship We’re living in a time when environmental responsibility is not just an option but a necessity. EnviroBlu’s water-based, non-toxic, phosphate-free formula is designed to be safe for both people and the planet. This isn’t just about cleaning; it’s about preserving our environment for future generations. By choosing EnviroBlu, you’re making a powerful statement about your commitment to sustainability. Why the 4-Litre Size is a Game Changer Big Jobs, Easy Handling The 4-litre EnviroBlu bottle is designed to strike the perfect balance between capacity and manageability. It’s large enough to handle extensive cleaning tasks but compact enough to be easily handled and stored. This means you get the power of an industrial-strength cleaner in a size that’s practical for everyday use. Versatility From heavy-duty industrial equipment to everyday residential cleaning, EnviroBlu’s versatility makes it an indispensable tool. Its powerful cleaning action is perfect for a wide range of applications, including: • Industrial machinery and equipment • Vehicles and heavy-duty trucks • Large commercial spaces • Residential areas, including kitchens and bathrooms Certified Safe EnviroBlu is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner. This ensures that our product is safe to use in diverse environments, including food processing areas and maritime industries. You can clean with confidence, knowing you’re meeting the highest safety standards. Directions for Use Smaller, Less Soiled Areas: 1. Mix water with EnviroBlu as per the required dilution ratio. 2. Spray the mixed solution directly on the surface. 3. Wipe the area with a dry cloth. Larger, Heavily Soiled Areas (Without Power Washer): 1. Pre-rinse the affected area with water. 2. Spray EnviroBlu directly on the target area and let it work for 1-3 minutes. 3. Brush the area if necessary. 4. Rinse thoroughly with water. 5. Repeat if the area has not been cleaned recently. Larger, Heavily Soiled Areas (With Power Washer): 1. Spray the area with a water jet only. 2. Introduce EnviroBlu into the power washer. 3. Rinse with straight water. Stay Green, Go Blu! Choose the 4-litre EnviroBlu for your big cleaning jobs. Experience the unmatched efficiency, cost savings, and environmental stewardship that only EnviroBlu can provide. Let’s transform the way we clean and build a more sustainable future together.

Elevate Your Automotive Services with Wheel Service Equipment Leasing from CWB National Leasing Transforming Your Auto Shop with Advanced and Flexible Equipment Solutions For automotive repair shops, tire stores, and service centers, having the latest wheel service equipment is critical for providing high-quality service. Leasing wheel service equipment through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and efficient solution for businesses seeking to enhance their wheel servicing capabilities. Here’s how leasing wheel service equipment can benefit your automotive business: 1. Quick Access to State-of-the-Art Equipment Recognizing the fast-paced nature of the automotive service industry, CWB National Leasing provides a rapid leasing process. Decisions are typically made within 48 hours of application submission, ensuring that your wheel service equipment can be delivered and operational swiftly. This efficiency enhances your service offerings and minimizes downtime. 2. Enhanced Financial Power Leasing wheel service equipment with CWB National Leasing boosts your financial flexibility. It enables you to conserve capital by choosing periodic payments over a large upfront purchase, freeing up resources for other critical business operations. The option to add extra features or accessories to your equipment for a small payment increase allows for customization to meet specific service needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your wheel service equipment starts contributing to your business’s revenue while being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing wheel service equipment can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease wheel service equipment through CWB National Leasing is a strategic decision that equips your automotive business with essential service tools.

Simplify Your Charging with the Wisdom USB Adapter – A Smart Solution from Provix Provix is excited to unveil the Wisdom USB Adapter, a cutting-edge charging accessory designed to enhance your charging experience. This magnetic USB charger features self-designed connectors that redefine convenience and efficiency in powering your devices. Innovative Magnetic USB Connectors The USB Adapter boasts unique magnetic USB connectors, specifically engineered for a seamless and secure connection. This design allows for quick and effortless attachment to your devices, ensuring a stable and consistent charge. The user-friendly nature of these connectors makes the charging process incredibly simple, even in less-than-ideal conditions or tight spaces. Versatile for Various Environments The Wisdom USB Adapter is designed to extend your charging capabilities across multiple settings. Whether you're at home, in the office, a hotel, or on the go, this adapter provides a reliable charging solution. Its white color and sleek design add a touch of elegance to your tech collection, making it a stylish and practical choice. Durable and High-Quality Construction Crafted with a focus on durability, the USB Adapter features a high-quality magnetic connector and a robust connecting cable. With a cable length of 1 meter, it offers the flexibility and reach needed in various charging situations. Effortless Charging Process Using the Wisdom USB Adapter is straightforward and efficient: 1. Connect the magnetic head to the multi-purpose lamp's charging interface. 2. Attach the USB connector end to a WISDOM power adapter or any standard USB port. This simple two-step process ensures your devices are charged without any hassle, keeping them ready for use whenever you need them. Ideal for Modern Professionals The Wisdom USB Adapter is a perfect match for professionals who require a reliable and efficient charging solution for their equipment. Its compatibility with various devices and ease of use make it an indispensable tool for miners, construction workers, and outdoor enthusiasts. Get Your Wisdom USB Adapter Today Embrace the convenience of the Wisdom USB Adapter, available now at Provix. Visit our website at www.provix.net to discover more about this innovative charging solution and explore our range of high-quality mining and construction equipment. Stay charged and ready with Wisdom's advanced technology.

Unleash Unrivaled Power: Poseidon Robotics' Ultra High Density Power Supplies for Subsea Exploration In the mesmerizing depths of the ocean, where the most critical subsea missions take place, a reliable and efficient power supply can be the difference between success and failure. At Poseidon Robotics, we take pride in introducing our latest breakthrough innovation - the Ultra High Density Power Supplies. Designed to thrive in the most challenging subsea environments, our power supplies empower your ROVs and subsea equipment to achieve unparalleled performance, even at depths of up to 400 meters. Harness the Power of Innovation As pioneers in subsea robotics, we understand the unique demands of the underwater world. That's why we have poured our expertise and passion into crafting the Ultra High Density Power Supplies. These cutting-edge power solutions are engineered to deliver optimal performance while meeting the strictest safety and reliability standards. Power Up Your Subsea Missions With our Ultra High Density Power Supplies, you can unleash the full potential of your subsea equipment. Whether you are conducting deep-sea research, underwater inspections, or oil and gas exploration, these power supplies will be the backbone of your mission's success. Compact, Yet Powerful Size and weight are crucial considerations in subsea operations. Our Ultra High Density Power Supplies are meticulously designed to maximize power output while maintaining a compact and lightweight form factor. This ensures seamless integration with your existing ROV or subsea systems, allowing for more efficient deployment and operation. Built for the Depths Operating in the deep ocean is no easy feat. Our power supplies are rigorously tested and rated for depths of up to 400 meters, providing you with the confidence to tackle the most challenging subsea missions. No matter how extreme the conditions, our power supplies will deliver unwavering performance. Safety and Reliability Above All At Poseidon Robotics, safety is our top priority. Our Ultra High Density Power Supplies are engineered with advanced safety features, ensuring protection against voltage spikes, short circuits, and overloads. You can trust that your equipment and personnel are safeguarded during every underwater operation. The Poseidon Advantage Choosing Poseidon Robotics means partnering with a company that has a proven track record of excellence in subsea technology. Our power supplies are the result of meticulous research, engineering expertise, and a passion for pushing the boundaries of what's possible beneath the waves. Experience the Future of Subsea Power Are you ready to take your subsea missions to new depths of success? Embrace the power of innovation with Poseidon Robotics' Ultra High Density Power Supplies. Whether you are an oceanographer, offshore engineer, or underwater explorer, our power supplies will be the driving force behind your mission's achievements. Explore the Depths with Poseidon Robotics Join the ranks of leading subsea explorers and choose Poseidon Robotics as your trusted partner. Our Ultra High Density Power Supplies are the key to unlocking the full potential of your subsea ventures. Contact us today to elevate your underwater capabilities and embark on a journey of endless possibilities beneath the waves.

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required.

Elevate Power Management with DAKAR: The Future of Energy Efficiency At ELEKS, we're committed to revolutionizing the energy industry with innovative software solutions that empower businesses to thrive in the digital age. Introducing DAKAR, our cutting-edge power management system designed to enhance operational efficiency, minimize errors, and transform the way energy is managed. DAKAR has become the preferred choice for numerous European energy producers, distributors, utilities providers, design organizations, and educational institutions, and for good reason. Unleash the Power of DAKAR Seamless Integration: DAKAR seamlessly integrates into any power industry organization, ensuring a smooth transition to advanced power management solutions without disrupting your existing workflows. Comprehensive Capabilities: Experience extensive capabilities for utilities network management, modeling, and planning. DAKAR empowers you to optimize your power networks, ensuring they operate at peak efficiency while adapting to both traditional and renewable energy sources. Enhanced Accuracy and Reliability: With DAKAR by your side, you can elevate the accuracy and reliability of your power systems. Our software empowers you to make informed decisions based on real-time data, leading to reduced errors and improved performance. Real Results, Real Numbers Impressive Customer Base: With a track record of success, DAKAR is trusted by 250 customers across diverse industries. From energy suppliers to educational institutions, businesses worldwide rely on DAKAR for streamlined power management. Leading Ukrainian Energy Suppliers: In Ukraine, where the energy landscape is evolving rapidly, DAKAR stands out as the software of choice for 2/3 of energy suppliers. Its impact on efficiency and productivity is undeniable. 40% Productivity Growth: Businesses using DAKAR have experienced a remarkable 40% growth in productivity. This tangible result speaks volumes about the transformative power of our software in enhancing operational efficiency. ELEKS: Pioneering Energy Innovation For over three decades, ELEKS has been at the forefront of technology and innovation, creating solutions that drive industries forward. DAKAR embodies our commitment to shaping the energy industry for the better, providing unparalleled tools to manage power systems with accuracy and precision. Experience the Future of Power Management Embrace the future of power management with DAKAR by ELEKS. Join the ranks of satisfied customers who have unlocked efficiency, minimized errors, and achieved remarkable growth. Elevate your operational efficiency and take control of your energy systems like never before. With DAKAR, the future is bright, sustainable, and powered by cutting-edge technology.

The electrical submersible pump is an efficient and reliable artificial-lift method for lifting moderate to high volumes of fluids from wellbores with volumes rates from 150 B/D to as much as 150,000 B/D (24 to 24,600 m3/d). A complete ESP system can be designed and supplied to meet the requirements from individual wells. The ESP system is comprised of; intake, pump, motor, seal section, cable, feed-through, surface electrical and any sensors, software and variable frequency drives (VFD's). ESP's can be used onshore, offshore, subsea, or in relatively high gas saturations.

Rebar, or reinforcing bar, is a bar that's used to reinforce and strengthen concrete under tension. It's typically made of steel, though fiberglass is popular for certain projects because it doesn't corrode and is non-magnetic. There are many steel rebar sizes, grades, and types to support a variety of structures. The number represents a unit of 1/8 of an inch. So that means a #4 rebar is 4 times 1/8 inch or in other words - 1/2 inch. #5 bar is 5/8 inch; #6 bar is 3/4 inch and so on. Rebar size #3 is used for driveways and patios. For walls and columns, #4 rebar size should be used as they require more strength.

The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position.

Accelerate Your Production with Injection Molding Machine Leasing from CWB National Leasing Enhancing Your Manufacturing Efficiency and Flexibility with Advanced Equipment Solutions For businesses in the manufacturing sector, especially those involved in plastic production, automotive components, or consumer goods, injection molding machines are critical for producing high-quality, precision products. Leasing injection molding machines through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially sound solution for businesses aiming to enhance their production capabilities. Here’s how leasing injection molding machines can benefit your business: 1. Rapid Access to High-Tech Manufacturing Equipment CWB National Leasing recognizes the importance of keeping your production line up-to-date and efficient. They offer a swift leasing process, typically making decisions within 48 hours of application submission. This ensures that your injection molding machines can be delivered and operational quickly, reducing downtime and increasing your manufacturing output. 2. Increased Financial Flexibility Leasing injection molding machines with CWB National Leasing enhances your financial power. It allows you to spread costs over manageable periodic payments instead of committing to a large upfront purchase, freeing up capital for other essential business operations. The flexibility to add extra features or accessories to your machines for a small payment increase allows for customization to meet specific production demands. 3. Effective Cash Flow Management Smaller lease payments over the term mean your injection molding machines start contributing to your business’s revenue while they're still being paid off. This strategy is key in maintaining a healthy expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing injection molding machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position.

Exploring the Depths with Unmatched Precision: Introducing the BL300 Heavy Inspection Class ROV At Poseidon Robotics, we pride ourselves on pushing the boundaries of subsea exploration technology, and our latest creation, the BL300 Heavy Inspection Class ROV, exemplifies this commitment to excellence. Designed to tackle large payloads and challenging dives, the BL300 combines cutting-edge features with a professional Aluminum frame, delivering unparalleled performance in its class. A Collaboration of Innovation: The Birth of BL300 Developed in close collaboration with BLUELINK, LLC, the BL300 ROV emerged as a result of identifying and addressing the market's evolving needs. Launched in March 2019, this exceptional remotely operated vehicle has since redefined the heavy inspection class, becoming the preferred choice for professionals in the subsea industry. The Perfect Blend of Power and Precision The BL300 boasts a unique vectored thruster layout, strategically designed to provide optimum control and stability during underwater operations. Its professional Aluminum frame ensures durability and reliability, making it the ideal choice for challenging dives that demand exceptional performance. Moreover, by utilizing off-the-shelf components, we have achieved an unparalleled price/performance ratio, providing unbeatable value to our customers. Advanced Topside Integrated Console: A Complete Solution in One Package With the BL300 Heavy Inspection Class ROV, we've taken convenience to the next level. The Topside Integrated Console houses a 22-inch sunlight-readable monitor and a hand controller, eliminating the need for additional equipment. The ROV flight computer supports a fully stabilized mode, enabling six-axis stability for precise maneuvering and control. Unrivaled Payload Capacity and Thruster Configuration The BL300 redefines what's possible in a heavy inspection class ROV by offering exceptional payload space and capacity. With a depth rating of 400 meters, this powerhouse can handle the most demanding subsea missions. The smaller diameter vertical thrusters are stacked to optimize the payload area, making it the perfect solution for accommodating large payloads while maintaining stability. The BL300 at a Glance: Specifications • Depth rating: 400m • Dimensions: 725x465x425mm (LWH) • Weight in air: 32.1kg • Payload capacity (fresh water): 9.8kg • Payload area: 610mm x 457mm • Thruster: 8 lateral (45deg), 6 vertical • Ballard Pull: 20kg lateral, 24kg vertical • Top speed: 3 knots • Video: 1080 HD IP camera with tilt • Aux video: NTSC/PAL input • Lights: 10x 1,500 Lumen each • Connectivity: 1x Ethernet, 4x Serial • Aux power: 5/12/24VDC regulated The Topside Integrated Console: Specifications • Output voltage: 400VDC, 3kW • Input voltage: 240VAC, 20A maximum • Monitor: 22in HD sunlight readable • Case: wheeled, 610x420x260mm, 24kg • Fully isolated output with LIM • Intel PC with Windows 10 installed • Aux HDMI monitor output The Unbreakable Tether To ensure a secure connection and reliable communication between the BL300 ROV and the topside console, our tether is designed with utmost strength and durability. With a breaking strength of 500kg and a 15mm diameter, this robust tether can handle the most demanding subsea conditions, ensuring seamless transmission of data and video. Experience the Poseidon Robotics Difference As pioneers in the subsea robotics and ROV industry, Poseidon Robotics has continuously driven innovation and excellence, and the BL300 Heavy Inspection Class ROV is the epitome of our dedication. Explore new depths with confidence, efficiency, and precision, and join the ranks of professionals worldwide who rely on Poseidon Robotics for unmatched performance. Unleash the Power of BL300 Today Discover a new era of subsea exploration with the BL300 Heavy Inspection Class ROV by Poseidon Robotics. Contact us now to explore the possibilities and equip yourself with the most advanced ROV technology available. Together, we will embark on a journey of discovery, uncovering the secrets that lie beneath the waves.

Unveiling Nulux's Robust Solution for Maintaining the Lifeblood of Your Operations: Long Haul Link Repairs In the vigorous and demanding milieu of the Oil and Gas industry, the stakes are astronomically high and the margin for error is strikingly slender. Here, communication is more than just a transfer of data; it’s the unerring lifeline that ensures smooth, synchronized, and secure operations. Introducing Nulux Network Solutions' pivotal service in the realm of Long Haul Link Repairs, ensuring that the veins of communication within your expansive operations remain unimpeded and robust, even in the face of unpredicted adversities. Embarking on a Journey of Resilient Connectivity Nulux Network Solutions, a harbinger of stellar products, solutions, and services throughout the entire energy value chain, strides with a commitment of not only delivering unparalleled network solutions but also aiding our customers in forging a path toward a more sustainable future. Long haul fiber optic links, spanning vast terrains, often traversing through some of the most inhospitable environments, form the critical backbone of communication networks in the Oil and Gas industry. Their impeccable functioning is non-negotiable, ensuring that every fragment of data from remote operational sites is conveyed precisely, securely, and without latency to where it is indispensably required. Nulux’s Long Haul Link Repair: A Vigilant Guardian of Your Communication Networks Our long haul link repair service is not merely a reactive solution to the unexpected impediments that might assail your fiber optic communications but a strategic, anticipatory shield that ensures your operations remain perpetually connected and resilient. In electing Nulux’s Long Haul Link Repair Service, you fortify your operations with: Proactive Vigilance: Monitoring and maintaining the integrity of your long haul links to predict and preemptively address potential issues before they escalate into critical failures. Rapid Response and Resolution: Ensuring that, in the event of disruptions, our team mobilizes with expeditious proficiency to diagnose, locate, and repair faults, reinstating the vitality of your communication backbone. End-to-End Expertise: Nulux’s veteran technicians, equipped with over two decades of combined experience and nuanced understanding of the challenges peculiar to the oil and gas sector, facilitate meticulous, rapid, and robust repair solutions. Comprehensive Aftercare: Post-repair, we ensure your links are not merely restored but optimized, and provide comprehensive reports and aftercare to preclude future occurrences and enhance overall network performance. Steadfast Communications with Nulux Your long haul links do more than just convey data; they ensure the heartbeat of your operations remains rhythmic and unerring. Nulux stands as a sentinel, ensuring these critical lifelines are perpetually robust, secure, and operational, safeguarding not merely your data but the seamless synchronicity of your extensive operations. Engage with Nulux Network Solutions, and let’s construct a future where your communications are not merely sustained but are resilient, where every byte of data traverses through your networks with unerring precision, and where every long haul link is more than a conduit, but a steadfast, unbreakable bond that perpetuates your operational excellence.

Empower Your Work with the Wisdom All-in-One Toolkit – A Comprehensive Solution from Provix Provix is proud to present the Wisdom All-in-One Toolkit, a versatile and comprehensive lighting solution tailored for professionals in mining, construction, and other demanding industries. This toolkit is designed to provide everything you need for effective and reliable illumination in various work environments. Complete Set for Varied Lighting Needs The All-in-One Toolkit includes: • A Wisdom 3A or 4A Cap Lamp, offering powerful and adjustable illumination. • A Magnetic USB Wire and Magnetic Connector for easy and secure charging. • Three lenses: Lens #1, Lens #4 (red), and Lens #6, to suit different lighting conditions and preferences. • A Power Supply with a US Plug, ensuring your lamp is always charged and ready to go. • A comfortable Head Strap for hands-free operation. High-Performance Lighting Features With a Panasonic battery of 2*3.5 = 7.0Ah, the cap lamp in this toolkit offers exceptional brightness levels of 1,800 | 12,000 | 25,000 LUX and luminosity of 50 | 265 | 533 LM. It provides long working times of 60 | 13 | 5 hours and impressive lighting ranges of 85 | 219 | 316 meters, ensuring you have the right amount of light for any task. Versatile and User-Friendly Designed for versatility, the All-in-One Toolkit caters to various professional needs, from mining and construction to emergency response and outdoor activities. The different lenses allow for customization of the light beam, enhancing visibility and efficiency in diverse working conditions. Durable and Reliable The toolkit components are built to withstand the rigors of tough working environments. The robust construction of the cap lamp and accessories ensures longevity and reliability, making this toolkit a valuable investment for professionals. Elevate Your Lighting Experience Upgrade your lighting gear with the Wisdom All-in-One Toolkit from Provix. This comprehensive set is your solution for effective, versatile, and dependable lighting in any professional setting. Visit www.provix.net to learn more about this essential toolkit and explore our range of high-quality mining equipment.

ELEKS: Revolutionizing Energy Sector Through Big Data and AI Expertise The energy sector is undergoing a seismic shift, and at ELEKS, we're proud to be at the forefront of this transformation. Our unrivaled expertise in Big Data and artificial intelligence (AI) opens new avenues of efficiency and innovation for your organization. With a deep commitment to reshaping the energy landscape, we present you with a list of ten compelling benefits that our services can offer: 1. Data-Driven Decision-Making: Harness the power of data-driven insights. ELEKS' data modelling expertise and AI solutions empower you to make informed decisions that steer your organization towards success. 2. Streamlined Data Analytics: From diagnostic to predictive, our services streamline the entire spectrum of data analytics, providing clarity and actionable insights to support your strategic planning. 3. Swift Load-Flow Calculation: Embrace lightning-fast load-flow calculations powered by AI. Experience a significant reduction in calculation times, enabling quicker responses and better resource allocation. 4. Efficient Asset Management: Manage your energy assets with precision. Our AI-driven tools offer accurate asset insights that facilitate optimal utilization, maintenance planning, and resource allocation. 5. Risk Management Enhancement: Anticipate risks and mitigate them effectively. ELEKS' AI-based solutions help identify potential risks, enabling you to proactively address challenges and ensure continuity. 6. Innovation at Scale: ELEKS doesn't just adapt to change; we pioneer it. Our innovative approach ensures you stay ahead in an evolving energy landscape. 7. Personalized Solutions: Tailored to your organization's unique needs, our AI-powered offerings provide custom solutions that align seamlessly with your goals. 8. Technical Excellence: Expect precision and accuracy in every solution we deliver. Our team of experts ensures that you receive results of the highest technical caliber. 9. Collaborative Partnership: Partner with ELEKS to unlock your energy sector's potential. We collaborate closely with you, combining your industry knowledge with our technical prowess. 10. Future-Ready Resilience: With ELEKS, you're prepared for the future. Our AI solutions equip your organization to adapt, thrive, and excel as the energy sector evolves. At ELEKS, we're not just offering services; we're forging a path towards a more efficient, innovative, and sustainable energy sector. Join us in this journey of transformation as we leverage Big Data and AI to reshape the energy landscape. Trust ELEKS to empower your organization to make informed decisions, optimize operations, and drive success in the dynamic energy sector of tomorrow.

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line.

Maximizing Downhole Efficiency with HOCA Oil Tools' Plug with Valve Sub-Assembly In the challenging and intricate world of downhole oil and gas operations, having reliable, high-quality tools is essential to ensure efficiency, safety, and the success of interventions. HOCA Oil Tools stands at the forefront of this industry with its innovative Plug with Valve Sub-Assembly, designed to cater to the critical demands of downhole environments. Our products are crafted to provide unparalleled performance, ensuring your operations run smoothly and effectively. HOCA’s Plug with Valve Sub-Assembly: Precision Engineered for Downhole Success Our Plug with Valve Sub-Assembly is specifically designed for robust and reliable downhole application, offering a versatile solution for various operational needs. These plugs are essential for tasks such as pressure isolation, testing, and fluid control within the wellbore. Made with precision and from high-grade materials, they are built to withstand the harsh downhole environment, ensuring durability and operational integrity. Experience the HOCA Oil Tools Advantage By integrating HOCA Oil Tools’ Plug with Valve Sub-Assembly into your downhole operations, you are choosing a solution that emphasizes quality, performance, and customer satisfaction. Our commitment to innovation and excellence ensures that our products meet the complex demands of the oil and gas industry, providing you with tools that not only meet but exceed your operational requirements. Our Plug with Valve Sub-Assembly represents the pinnacle of downhole tool design, offering a blend of reliability, efficiency, and performance. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole challenges with advanced solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and leverage the power of our Plug with Valve Sub-Assembly to enhance your operational success. Partner with us and embrace the future of downhole operations with tools that set new industry standards for quality and performance. With HOCA Oil Tools, elevate your downhole operations to new levels of efficiency and reliability, ensuring your success in the competitive oil and gas industry.

Experience Rapid and Efficient Charging with the Wisdom NWB-30 Charger – Now Available at Provix Provix is proud to introduce the Wisdom NWB-30 Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This state-of-the-art charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Versatile Charging Options The NWB-30 Charger offers both AC and DC charging capabilities, providing flexibility in various environments. It supports AC input of AC 100-240 V ± 10%, 0.2 A, 50-60 Hz, and DC input of 7-30 V, 1.6 A. This versatility ensures that you can charge your equipment anywhere, whether on-site or in the office. Optimized for Wisdom Lamp3A This charger is specially designed for the Wisdom Lamp3A, offering a fast charging time of approximately 5 hours. Its compatibility with this lamp model ensures that your lighting equipment is quickly ready for use, reducing downtime and enhancing productivity. High-Efficiency Charging With a maximum DC output voltage of 4.80 V ± 0.05 V and a DC output current of 2000 mA ± 100 mA, the NWB-30 Charger delivers efficient and rapid charging. This ensures your equipment is charged in the shortest possible time, keeping you ready for any task. Compact and Lightweight Design Measuring 114 x 79 x 35 mm (4.5 x 3.1 x 1.4 in) and weighing only 170 g (6.00 oz), the NWB-30 is compact and portable. Its lightweight design makes it easy to carry and store, ideal for professionals on the move. Reliable and Durable Built to withstand the rigors of mining environments, the NWB-30 Charger is both reliable and durable. Its robust construction ensures long-term performance, making it a valuable investment for any mining professional. Enhance Your Charging Experience The Wisdom NWB-30 Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit our website at www.provix.net. Stay powered and productive with the Wisdom NWB-30.