Casing Collar Locator (CCL)

Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

ELEKS: Powering the Future of Efficient Energy Distribution Management Harness the power of technology to revolutionize energy distribution management with ELEKS. Our expertise in energy software development brings stability, accessibility, cleanliness, and sustainability to your consumers while ensuring the resilience of your networks against challenges and threats. As a leading energy software company, we're at the forefront of developing and integrating Custom Distribution Management Systems (ADMS) that empower utility suppliers to meet customer demands for power quality, reliability, and data security. Elevate Your Energy Management with ELEKS Energy Software Development: Embrace the future of energy management with our advanced software solutions. Dramatically enhance productivity, accessibility, safety, and sustainability in your business power system. Join the ranks of forward-thinkers who are leveraging technology to redefine the energy landscape. Empowering Energy Producers and Distributors: Customized Solutions for You: As a seasoned custom software development company, ELEKS has been empowering energy producers, distributors, smart city developers, and governmental organizations for three decades. Our expertise lies in crafting tailored data-driven software solutions and energy management systems that leverage cutting-edge technologies such as Cloud, IoT, blockchain, and drones. Unveiling the Future of Energy Management: Understanding Your Needs: We comprehend the intricacies of the energy and utility industry – from modern power management solutions for diverse sources to facilities and businesses. Our journey has been marked by refining our understanding of unique industry challenges and leveraging technology to develop innovative solutions. Why Choose ELEKS? Experience That Matters: With a legacy spanning thirty years, ELEKS brings a wealth of experience to the table. Our team of experts is well-versed in addressing complex energy management challenges. Cutting-Edge Technologies: Our energy software development solutions are fueled by the latest technologies, including Cloud, IoT, blockchain, and more. Stay ahead of the curve and embrace the future with confidence. Empower Efficiency and Sustainability: Energy efficiency and sustainability aren't just buzzwords – they're critical factors in a changing world. ELEKS' solutions empower you to meet these demands head-on. Join the Energy Revolution with ELEKS Revolutionize the energy distribution landscape and empower efficient energy management with ELEKS. Our energy software development solutions are designed to catapult your business into a future of resilience, reliability, and sustainability. Embrace innovation – choose ELEKS to lead the way into a brighter, greener future.

The Oil-Only Absorbent Pillow, represented by the OH-PI1212, emerges as a utilitarian solution. From the versatile material known as polypropylene, this unassuming pillow bears the capacity to redefine the efficiency and sustainability of liquid cleanup. Why is Polypropylene chosen as the material for use? Polypropylene is a preferred material for oil-based cleanup for several reasons, making it an ideal choice for products like the Oil-Only Absorbent Pillow. Hydrophobic Nature Polypropylene is inherently hydrophobic, meaning it repels water. This characteristic is crucial in oil-based cleanup scenarios where the goal is to selectively absorb oils while avoiding the absorption of water. The hydrophobic nature of polypropylene ensures that the material remains focused on its primary task—absorbing oil-based liquids. High Affinity for Oil Polypropylene has a high affinity for oil-based substances. When in contact with oils, polypropylene quickly absorbs and retains these liquids. This property enhances the efficiency of cleanup operations, allowing for the rapid containment and absorption of oil spills. Lightweight and Durable Polypropylene is a lightweight yet durable material. This is advantageous in cleanup products like absorbent pillows, as it ensures ease of handling and deployment while maintaining structural integrity during use. The lightweight nature makes these products practical and user-friendly in various industrial settings. Chemical Resistance Polypropylene is known for its chemical resistance, providing stability when exposed to a wide range of substances, including oils and hydrocarbons. This resistance ensures that the material remains effective and does not break down when encountering various oil-based liquids. Recyclability Polypropylene is recyclable, adding an environmentally conscious aspect to its use in oil-based cleanup products. The ability to recycle polypropylene helps reduce the overall environmental impact by promoting the responsible disposal and reuse of materials. Cost-Effectiveness Polypropylene is a cost-effective material, contributing to the affordability of products designed for oil-based cleanup. Inert Nature Polypropylene is inert, meaning it does not react with or alter the composition of the substances it meets. This inert nature is crucial in cleanup situations where the goal is containment and absorption without introducing additional complications or reactions. Where is the Oil-Only Absorbent Pillow typically used? • Industrial facilities • Marine environment • Construction sites • Oil refineries • Emergency response • Environmental cleanup projects • Agricultural operations • Transportation Technical Specifications Part Number: OH-PI1212 Product Type: Absorbent Pillow Fluids Absorbed: Oil Based Liquids Volume Absorbed per unit: 1.35 gal Colour/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Volume Absorbed per pkg.: 6.7 gal Floating: Yes UV Resistant: No Size: 12” x 12” Filler Material: Polypropylene Filler Sock/Boom Profile: Square Flame Resistant: No Incinerable: Yes

Introducing SEM SDR Rust Remover, the revolutionary rust removal technology that is changing the game in the steel industry. Developed from proven nuclear industry and engineering pre-commission operations, this water-based, safe and non-toxic product is flexible and effective on all grades of steel. SEM SDR Rust Remover is unlike any other rust removal product on the market. With a neutral pH and non-corrosive properties, it is safe for use on all steels, metals and engineering polymers. When used as directed, SEM SDR effectively removes all rust to leave behind a super clean, virgin metal surface. What sets SEM SDR apart is its ability to impart a degree of corrosion resistance to the treated surface. This helps to prevent flash rusting after cleaning, providing long-lasting protection for your valuable assets. To ensure the best results, it is recommended to degrease the metal surface before treatment with SEM SDR. This can easily be achieved with a surfactant or wash. Don't settle for less when it comes to rust removal. Choose SEM SDR Rust Remover and experience the power of advanced technology and superior results.

Maximize Well Integrity and Safety with HOCA Oil Tools' BHP Tool Accessories In the complex and demanding realm of oil and gas extraction, ensuring well integrity and optimizing production are paramount. HOCA Oil Tools rises to this challenge with our premium BHP (Bottom Hole Pressure) Tool Accessories, specifically designed to enhance the performance and reliability of downhole pressure monitoring systems. These accessories, vital for the precise measurement and control of well conditions, are engineered to complement our BHP tools, facilitating accurate data acquisition and ensuring well safety. HOCA’s BHP Tool Accessories: Elevating Downhole Precision and Reliability Our BHP Tool Accessories range includes various components crucial for the efficient operation of bottom-hole pressure tools. From specialized adaptors that ensure secure fittings to protective carriers designed to safeguard sensitive instruments during deployment and retrieval, each accessory is crafted to meet the highest standards of quality and performance. By addressing the unique challenges of downhole environments, HOCA Oil Tools provides the oil and gas industry with solutions that not only meet but exceed operational demands. Experience the Difference with HOCA Oil Tools Opting for HOCA Oil Tools' BHP Tool Accessories means choosing a partner dedicated to enhancing the efficiency and safety of your downhole operations. Our commitment to innovation and quality ensures that our products not only meet industry standards but also provide the reliability and performance essential for today's challenging oilfield environments. By integrating our BHP Tool Accessories into your operations, you are not only optimizing your downhole monitoring capabilities but also investing in the safety and longevity of your equipment. With HOCA Oil Tools, you gain access to a comprehensive suite of solutions designed to elevate your operational success. Choose HOCA Oil Tools for your BHP Tool Accessories and join the ranks of industry professionals who trust our products to enhance their downhole operations. Partner with us, and unlock the full potential of your oil and gas extraction activities with tools and accessories crafted for excellence. With HOCA Oil Tools, empower your downhole operations with precision-engineered solutions that deliver unmatched performance and reliability.

An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue.

ELEKS: Crafting Excellence through Innovative Product and Service Design In the fast-paced world of technology and business, innovation is the key to staying ahead. At ELEKS, we're more than just a software engineering company – we're your partners in innovation. Our Product and Service Design offerings are your gateway to creating exceptional domain-specific technology solutions that resonate with your brand's vision and scale. Bringing Your Visions to Life: We're here to turn your business ideas into reality. With a deep focus on understanding your users' needs, we help you design and validate disruptive concepts that resonate with the market. Our seasoned experts collaborate with you to define your value proposition and chart an actionable roadmap to success. Revitalize Existing Offerings: Are users leaving your products untouched? Our services extend to reimagining your current offerings for growth. We identify revenue streams within your existing products, coupled with enhancing the efficiency of legacy systems, to rejuvenate your market presence. Smart, Forward-Looking Decisions: Navigating uncertainty requires foresight. Our team of experts guides you in creating sustainable, industry-leading product strategies. Whether you're steering a new product or aligning short-term goals with a visionary outlook, we're here to help you stay ahead of the curve. Testing Bold Business Concepts: Entering a new market or amplifying your presence? Our team delves deep into your business goals, market dynamics, and technological horizons. Armed with this analysis, we craft service concepts that align with your needs and are backed by technology-proven solutions. Accelerate Time-to-Market: Your success is our mission. Our product design service accelerates your journey from concept to market. Startups secure investment, and enterprises streamline delivery processes, all while validating ideas through prototyping and testing. Enhance Customer Experience: Transition from mere communication to complete immersion. We identify gaps in your customer experience and develop actionable plans for a service proposition that captivates, engages, and leaves a lasting impression. Unlock the ELEKS Advantage: Experience counts. Since 2009, our design and technology consulting team has propelled visionary entrepreneurs and product leaders forward. We empower you to transform groundbreaking ideas into tangible customer value. Top Ten Benefits of ELEKS' Product and Service Design Services: 1. Breakthrough Ideation: Transform ideas into game-changing concepts backed by user insights. 2. Enhanced Engagement: Create customer-centric strategies through behavioral science. 3. Strategic Roadmapping: Chart a comprehensive product strategy with clear priorities. 4. Winning Business Models: Validate models for competitive advantages and market fit. 5. Technological Excellence: Design products that optimize performance and scalability. 6. Deep User Insights: Understand customers through qualitative and quantitative research. 7. Inclusivity Assessment: Extend reach by crafting products inclusive to diverse needs. 8. Innovative Workshops: Unleash potential through tailored Innovation Workshops™. 9. Streamlined Experience: Identify bottlenecks and unlock new opportunities. 10. Expert Product Strategy: Implement scalable solutions with comprehensive guidance. ELEKS is your conduit to design and innovation, committed to transforming your ideas into impactful reality. From envisioning concepts to realizing industry-leading solutions, we are your steadfast partners in innovation. With ELEKS, your aspirations find a partner dedicated to propelling them into the future. Welcome to the realm of design and innovation – welcome to ELEKS.

Achieving Uninterrupted Connectivity in the Oil and Gas Industry with Nulux Wireless Access Points Connectivity within the sprawling expanse of the oil and gas industry is pivotal to ensuring seamless operations, meticulous project planning, and scrupulous quality assurance. Recognizing the industry's intricate need for steadfast communication, Nulux Network Solutions proudly presents its expertise in Wireless Access Points (WiFi), a service meticulously sculpted to facilitate unbroken connections even in the most challenging terrains and bustling work environments. Unlocking New Operational Efficiencies with WiFi Solutions Incorporating wireless connections into your operational fabric isn't merely about ensuring communication; it's about unlocking new echelons of operational efficiencies, enabling rapid documentation review, streamlining QA-QC processes, and enhancing project planning through unbroken connectivity. Nulux, with its robust wireless networks, assures that every corner of your business, whether it be the office, the warehouse, or the facility floor, stays interconnected, propelling your business towards enhanced time and cost efficiency. Advantages of Opting for Nulux Wireless Access Points Reliability: In environments where every second count, our WiFi solutions ensure that your data transmission remains steadfast, unbroken, and secure. Customization: Understanding that every facility has unique challenges, our team designs WiFi networks that are meticulously tailored to your operation, ensuring optimal coverage and performance. Scalability: As your operations evolve, our wireless networks can be effortlessly expanded to cater to growing data and connectivity needs. Security: Ensuring that your data traverses through a secure network, we implement cutting-edge security protocols, safeguarding your critical operational data from potential cyber threats. Nulux – Your Ally in Enhanced Connectivity Our proficiency isn’t merely limited to providing robust WiFi solutions. Navigating through the complexities of wireless communication, we’ve developed expertise in designing and implementing various wireless infrastructures like Point-to-Point (P2P) and Point-to-Multipoint Radio Networks, and Mesh Networks, ensuring that you always find a solution that aligns with your specific needs. While P2P networks facilitate streamlined communication links between two fixed points, ensuring enhanced security and cost-effectiveness, Point-to-Multipoint networks facilitate connectivity between more than two points through a single shared line, ensuring that data can be sent and received in a many-to-many configuration. Deploying Expertise Where It Matters Being at the industry forefront in wireless technology, Nulux is committed to ensuring that as the tech evolves, your operations evolve with it. Our experienced team, having substantial experience in the nuanced domains of wireless system and infrastructure design and implementation, is dedicated to propelling your operations into a future where connectivity isn’t just ensured; it's effortlessly seamless. Elevating Operations with Nulux In an era where connectivity translates to operational proficiency, Nulux emerges as your partner, ensuring that every node of your operation stays interlinked through robust, secure, and reliable wireless networks. Explore the future of unhindered connectivity in the oil and gas sector with Nulux Network Solutions – where technology and expertise converge to elevate your operations. Join hands with Nulux, and let’s weave a network of unbroken connectivity, propelling your operations into a future where every data point, every communication, and every connection is seamless, secure, and reliable.

Introducing the Rod Sentinel. Sivam has designed and patented the first fail safe, surface controlled subsurface safety valve for sucker rod application called rod sentinel - an innovative technology that changes the game in dual barrier policy of the oil and gas market. This Sivam safety valve can be applied in all sucker rod completed wells where it is necessary to comply with the dual barrier policy. The Rod Sentinel SCSSSV can be installed in landing nipple for 2.81 inches surface controlled wireline retrievable insert valves with standard profiles. The Rod Sentinel SCSSSV lock mandrel has been designed to be installed and retrieved by the sucker rod string in combination with the pump plunger so it completely avoids the cost and risk of a workover. The beam pump safety valve was designed in compliance with the fail-safe concept. Control line pressure keeps the valve open and when the pressure fails the preloaded power spring in the valve pushes the sealing pads within the cone housing and the valve closes using the same hydraulic control line technology as a conventional SCSSSV.

Discover the Powerhouse Welding Solution: Multiprocess 301-SL by Canaweld Are you in search of an industrial-grade welding machine that brings power, intelligence, and versatility to your oil and gas operations? Look no further than the Multiprocess 301-SL by Canaweld. This heavy-duty, synergetic, and intelligent welding machine is packed with advanced features, making it the ultimate choice for professional welders in the industry. Unleash Welding Excellence The Multiprocess 301-SL is an inverter-based arc welding power source optimized for MIG, Flux-Cored, Gasless Wires, TIG lift, and Stick welding, both in manual and synergic mode. Experience exceptional welding performance and a wide range of professional functions that meet the demands of industrial workshops. Its portability and ease of transport make it a reliable companion on any job site. Master Your Craft with Ease Equipped with a 5-inch color LCD display and various automatic controls, the Multiprocess 301-SL ensures quick and easy setup and operation. Both experienced welders and novices can operate the device effortlessly, reducing parameter setting time and increasing actual welding time. Synergic control provides pre-set weld parameters, improving usability and enabling operators of all skill levels to achieve precise results. Versatility at Your Fingertips No matter your welding requirements, the Multiprocess 301-SL has you covered. With the ability to perform MIG, Flux Cored, Gasless Wires, TIG lift, and Stick Welding, this machine adapts to various applications with ease. It is designed and tested to withstand the toughest conditions, ensuring reliability even in extreme heat of 104°F/40°C. Empowering Welding Precision The Multiprocess 301-SL boasts digital control of welding parameters based on the material or gas type and wire diameter, allowing for precise and efficient welding. Its manual polarity changeover feature supports the most common gas and gasless wires, Stick electrodes, and Lift TIG processes, providing flexibility in your welding tasks. Superior Wire Feeding Mechanism Canaweld's commitment to quality extends to the machine's wire feeding mechanism. The Multiprocess 301-SL features a professional and heavy-duty wire feeding system with 37mm rolls, a sealed, powerful, and durable wire feeder motor, and replaceable double groove rolls requiring no tools for replacements. Unmatched Customization Tailor your welding experience with adjustable voltage, wire speed, wave form, and burn back in the MIG process. In the TIG process, enjoy adjustable amperage, final slope, and post flow, while the Stick welding process allows for adjustable amperage, arc force, and material thickness selection. Designed for Convenience Canaweld understands the importance of easy access and movement during welding tasks. The Multiprocess 301-SL is equipped with flip doors and a specific mechanism to assist movement, allowing you to hold the doors in place at an angle for maximum ease of access. Additionally, the machine comes with lockable swivel casters for enhanced mobility. Reliable, Durable, and Worry-Free With Canaweld's comprehensive 3-year warranty, you can weld with confidence, knowing that your investment is protected. The Multiprocess 301-SL also includes two built-in eyebolts for lifting, making transportation and storage hassle-free. Join the Ranks of Industry Professionals Experience the power, precision, and versatility of the Multiprocess 301-SL by Canaweld. This welding powerhouse will elevate your oil and gas projects to new levels of efficiency and excellence. From novices to seasoned professionals, the Multiprocess 301-SL is the ultimate choice for welders who demand the best. Unlock your welding potential today with Canaweld. Invest in the future of welding technology and experience the unmatched performance of the Multiprocess 301-SL.

Accelerate Your Production with Injection Molding Machine Leasing from CWB National Leasing Enhancing Your Manufacturing Efficiency and Flexibility with Advanced Equipment Solutions For businesses in the manufacturing sector, especially those involved in plastic production, automotive components, or consumer goods, injection molding machines are critical for producing high-quality, precision products. Leasing injection molding machines through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially sound solution for businesses aiming to enhance their production capabilities. Here’s how leasing injection molding machines can benefit your business: 1. Rapid Access to High-Tech Manufacturing Equipment CWB National Leasing recognizes the importance of keeping your production line up-to-date and efficient. They offer a swift leasing process, typically making decisions within 48 hours of application submission. This ensures that your injection molding machines can be delivered and operational quickly, reducing downtime and increasing your manufacturing output. 2. Increased Financial Flexibility Leasing injection molding machines with CWB National Leasing enhances your financial power. It allows you to spread costs over manageable periodic payments instead of committing to a large upfront purchase, freeing up capital for other essential business operations. The flexibility to add extra features or accessories to your machines for a small payment increase allows for customization to meet specific production demands. 3. Effective Cash Flow Management Smaller lease payments over the term mean your injection molding machines start contributing to your business’s revenue while they're still being paid off. This strategy is key in maintaining a healthy expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing injection molding machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position.

The Oil-Only Absorbent Pillow, represented by the OH-PI1212, emerges as a utilitarian solution. From the versatile material known as polypropylene, this unassuming pillow bears the capacity to redefine the efficiency and sustainability of liquid cleanup. Why is Polypropylene chosen as the material for use? Polypropylene is a preferred material for oil-based cleanup for several reasons, making it an ideal choice for products like the Oil-Only Absorbent Pillow. Hydrophobic Nature Polypropylene is inherently hydrophobic, meaning it repels water. This characteristic is crucial in oil-based cleanup scenarios where the goal is to selectively absorb oils while avoiding the absorption of water. The hydrophobic nature of polypropylene ensures that the material remains focused on its primary task—absorbing oil-based liquids. High Affinity for Oil Polypropylene has a high affinity for oil-based substances. When in contact with oils, polypropylene quickly absorbs and retains these liquids. This property enhances the efficiency of cleanup operations, allowing for the rapid containment and absorption of oil spills. Lightweight and Durable Polypropylene is a lightweight yet durable material. This is advantageous in cleanup products like absorbent pillows, as it ensures ease of handling and deployment while maintaining structural integrity during use. The lightweight nature makes these products practical and user-friendly in various industrial settings. Chemical Resistance Polypropylene is known for its chemical resistance, providing stability when exposed to a wide range of substances, including oils and hydrocarbons. This resistance ensures that the material remains effective and does not break down when encountering various oil-based liquids. Recyclability Polypropylene is recyclable, adding an environmentally conscious aspect to its use in oil-based cleanup products. The ability to recycle polypropylene helps reduce the overall environmental impact by promoting the responsible disposal and reuse of materials. Cost-Effectiveness Polypropylene is a cost-effective material, contributing to the affordability of products designed for oil-based cleanup. Inert Nature Polypropylene is inert, meaning it does not react with or alter the composition of the substances it meets. This inert nature is crucial in cleanup situations where the goal is containment and absorption without introducing additional complications or reactions. Where is the Oil-Only Absorbent Pillow typically used? • Industrial facilities • Marine environment • Construction sites • Oil refineries • Emergency response • Environmental cleanup projects • Agricultural operations • Transportation Technical Specifications Part Number: OH-PI1212 Product Type: Absorbent Pillow Fluids Absorbed: Oil Based Liquids Volume Absorbed per unit: 1.35 gal Colour/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Volume Absorbed per pkg.: 6.7 gal Floating: Yes UV Resistant: No Size: 12” x 12” Filler Material: Polypropylene Filler Sock/Boom Profile: Square Flame Resistant: No Incinerable: Yes

Elevate Public Sector Operations with ALCiT's Dedicated Solutions In the world of the public sector, the demands are constant – achieving more with less while navigating an ever-expanding sea of complexity. As challenges evolve, cybersecurity remains a paramount concern. ALCiT understands the intricate dynamics you face, and we're here to provide solutions that not only work but excel in the unique landscape of the public sector. Security: Your Ultimate Priority, Our Expertise Cybersecurity isn't just a checkbox; it's a commitment. In the public sector, where the stakes are high and the responsibilities are monumental, security can't be compromised. ALCiT is your dedicated partner, ensuring that every solution we provide is fortified with security measures that align with the gravity of your mission. A Portfolio Tailored to Excellence ALCiT understands that one-size-fits-all solutions won't cut it. That's why we've curated a portfolio of solutions, each adaptable to your unique needs. Our solutions, rooted in enterprise-grade tools, are pre-configured for optimal performance, delivering maximum value in record time. Whether deployed individually or as an integrated suite, we ensure your operations run seamlessly. Public Sector Solutions That Excel Security Operation Center (SOC) as a Service: Trust is earned through vigilance. Our 24/7 SOC monitoring offers round-the-clock surveillance, providing real-time threat detection and response. In just weeks, your security operations will be elevated to new heights. Network Access Control (NAC): Control isn't a luxury; it's a necessity. ALCiT's NAC empowers you to regulate network access, ensuring only authorized devices enter your domain, bolstering security and control. Network Refresh: Simplify your network management and enhance security posture with our network refresh solutions. Choose between a Service-based approach or a purchase model – either way, we ensure your network is optimized for success. Secure Today, Empower Tomorrow ALCiT's commitment to the public sector goes beyond services; it's a partnership built on trust and excellence. Let us empower your operations, enable your teams, and ensure your data remains fortified against the evolving challenges of the digital realm. Elevate public sector operations with ALCiT's dedicated solutions.

Fortify Your Datacenter with ALCiT's Qualys Partnership In the realm of datacenter security, the challenge is immense, but the stakes are even higher. ALCiT stands proudly beside Qualys, the trusted sentinel safeguarding 19,000 global businesses across 130 countries. Our partnership with Qualys redefines how you protect, monitor, and enhance your datacenter security, ensuring that vulnerabilities are addressed and threats are thwarted. Qualys: The Shield of Data Security In a world where data is the currency of progress, Qualys reigns as the fortress of protection. Trusted by global businesses and backed by relentless innovation, Qualys has earned its place as the defender of data integrity. ALCiT's partnership with Qualys brings this unrivaled protection to your datacenter. Your Datacenter: Safeguarded, Simplified, Strengthened Comprehensive Inventory: Every asset in your datacenter is meticulously cataloged and kept up-to-date. With Qualys, you gain clarity and control over your infrastructure like never before. Bug Extermination Made Easy: Say goodbye to breaches. Qualys empowers you to effortlessly detect and eliminate bugs that may compromise your datacenter's security. Real-Time Monitoring, Rapid Alerts: The digital landscape evolves, and so should your security. Qualys offers continuous network monitoring, promptly alerting you to any changes that demand attention. Prioritize Threats with Precision: Not all threats are equal. Qualys equips you with the ability to prioritize threats based on their criticality, ensuring that you tackle the most pressing vulnerabilities first. File Validation, Compliance Assured: Compliance isn't a choice; it's a necessity. Centralized file change logging allows you to adhere to compliance standards while maintaining a secure environment. Uncover Stealthy Malware: Malware often lurks in shadows. Qualys' vigilant system flags malware that might evade other defenses, ensuring your datacenter remains a fortress. Unlock Datacenter Security Excellence Today ALCiT's Qualys partnership isn't just a collaboration; it's your key to fortified datacenter security. Experience the power of innovation and protection that safeguards your digital assets and preserves your business's integrity. Experience the power of ALCiT's partnership with Qualys.

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.

Elevate Your Communication with Video Conferencing System Leasing from CWB National Leasing Transforming Your Business Meetings with State-of-the-Art Digital Solutions In an era where digital communication is key to business success, having a reliable and high-quality video conferencing system is essential. Leasing video conferencing systems through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and modern solution for businesses looking to enhance their digital communication capabilities. Here’s how leasing video conferencing systems can benefit your business: 1. Fast Access to Advanced Communication Technology CWB National Leasing understands the importance of effective digital communication in today’s business landscape. They provide a rapid leasing process, with decisions typically made within 48 hours of application submission. This ensures that your video conferencing systems can be delivered and operational quickly, enabling immediate enhancement of your communication strategies. 2. Increased Financial Flexibility Leasing video conferencing systems with CWB National Leasing enhances your buying power. It allows you to free up capital by choosing periodic payments over a large upfront purchase. The flexibility to add extra features or accessories to your systems for a small payment increase allows for customization to meet specific business communication needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your video conferencing systems start contributing to your business’s efficiency while they're being paid off. This strategy helps maintain a balanced expense-to-revenue ratio, crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in revenue, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing video conferencing systems can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease video conferencing systems through CWB National Leasing is a strategic decision that equips your business with essential digital communication tools while maintaining financial agility. It ensures access to the latest in video conferencing technology, vital for conducting efficient, high-quality digital meetings, without the financial burden of a large upfront investment. This leasing approach enables enhanced communication, improved collaboration, and increased productivity, contributing significantly to the success and growth of your business in the digital age.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line.